Kyosho Mad Force, 4 years of waiting finally over!

[wheelz696]

nice ive got a siagon enslave (mad force reproduction) cant get the engine to tune for nothing gotta love chain driven rc

[MrPaulous]

weel done mate enjoy

[superiourbeing]

good for you that you finaly got one=) ive will get one tomorow=) finally whit some 28 engine???

[MrLarzzon13]

you have a cute dog.

[admir2323]

Nice dog.

[Softiz9999]

WOW that sucked man, but gongrats that you made it work. By the way, nice videos ^^

[funboy6942]

Yes, and I do A LOT of on line trading back and forth, and in the RC community I have been screwed more then with any other trades.

My oldest usually does the videos, but had my wife do this one when my diff part showed up while the boy was at school. I couldnt wait to fire it up and play with it. My next trucks I hope to get is the Tower hobbies Tower Terror, and a Giga Crusher. may be getting them next tax time. I just traded my other QRC truck for a Rustler, another one I been wanting,

[funboy6942]

and just got, but it has a dead 2.5 motor when it was supposedly been rebuilt, so now I got to wait to get it going to make a video of it. But with this last trade I think I may have to say no more dealing with used rc stuff, I cannot take getting stuff that was not was told I was to get. But one day it will get a video, and one day I will get my Thunder Kitten and Kyosho boat fixed to get better videos of them too on here. Anyway glad you like them, my boy and I like to shoot them.

[Softiz9999]

Why did you wait 4 years? Has it been broke all the time? Or did u buy it after 4 years? LOL i wanna know ^^

[funboy6942]

Never really had the money to get one, and when I did the guy I got it off of screwed me over sending me a broken truck, and then had to wait to get the money for the parts to fix it. Im disabled, and can no longer work and the wife supports me and my 2 boys on her $7 a hour job till I can get on SSI. Everything that I been getting is because I wheel and deal, and sell my stuff off to get what I want, and it sucked it took me 3 1/2 years to get this, then another 6 months to get it fixed.

[funboy6942]

But since getting it my wife has bought me some things for it which Im trying to finish up. I got some aluminum parts, with the extended chassis for it. The front diff is still messed up and I need one of the servo blocks that attach to the suspension arm to finish it totally off. I hope that will be soon for I hate just looking at it, though it looks really good thanks to my wife getting me the parts I wanted for my Birthday and Christmas, but I just cant wait to see it move again.

[generallee96]

where can you get a mad force

[ProductVideos4U]

Direct from Kyosho them self.

[subaru14]

i gt a mad force and the shocks are not set up to pop off like that in stock form done a lot worse than that and not popped off

gr8 truck though nice level jumper and wheelies for days

[ProductVideos4U]

But as I wrote it was how I set the truck up putting it back together. I much rather have my tie rods, or shocks pop off during a crash and prevent any further damage elsewhere if I made them to stay on all the time.

Much rather just pop the stuff back on, then having to end my day and start replacing other broken parts parts ;)

[subaru14]

yeah i knw wot u mean m8

i live in d uk and parts are a nightmare to get been waitin for a dog bone holder since b4 xmas

well anyway enjoy d truck

[YamahaDrums07]

I found out what was wrong. My clutch shoes where totaly gone. And the spring was off, so was always engaged. Thank you for you're help.

Do you have a email?

[YamahaDrums07]

Yeah, I think the engine I put in natural just has high rpm so I need to get a more high grade clutch.

Thank you for the help. Keep in touch.

[YamahaDrums07]

Yeah, when I put the new engine in and gears, air filter. All that, it would just engage to gear while idling. So should I make it idle faster?

[funboy6942]

No slower. Your clutchs works by centrifical (sp) force. As the rpms go faster the clutch and springs fly outwards towards the clutch bell and grab it causing motion of the truck. You need to cut the idle back so its not too high and the cluches do not make contact with the bell at idle. If it dies as you turn the idle down you need to reset the motor and play with the high and low settings till you get them right.

[funboy6942]

Also if you bought the wrong clutch/springs for it get stiffer springs so the do not grap at such a low idle as well. Since Im not there it is very hard to tell what all factors are causing it but these are the only reasons for it. High idle, worn or wrong clutch springs. Hope it helps you.

[YamahaDrums07]

I have a Mad Force.

Though, mines completely done up to the MAX!

Can anyone help me with my idle speed?

I've done it up so much it's over kill and won't idle properly. It keeps moving while idling?

Help? lol thanks.

[funboy6942]

If it is idling at the proper speed without dying then your clutch is worn out and too loose ingaging the clutch at low speeds.

Just goto Kyoshodotcom and get a clutch for either a mad force or even a mega force. But what ever the case Kyosho sells all the parts to fix and repair a mad/mega force for they still sell them.

[funboy6942]

I do have one I just remembered that has almost everything but the diffs and cases. Motor, frame, tank, tranny, all there, just needs shocks, difs, radio gear, and tires. $150 you can have it. They are the best rock crawlers to make one out of, thats what I am doing with the one in the video. Send me a PM if you like to see some updated pics of her and what she looks like now.

[blackdiamondcadillac]

Sell me your Kyosho Mad Force

[funboy6942]

I would but I got sooooo much money wrapped up into it I will never get what I got in it back. its not where near stock anymore. Onthing stock on her now is the motor and tranny, aside of that its got every single New Era Hop Up on her including the extended 2x thick chassis. Still need to finish up the front diff and the 4wd sterring and it will be done.