Using Other Companies' Dies in the Cuttlebug Machine

[Patti559]

Thank you. That makes it so much easier, I have a lot of different dies and a cuttlebug. A great tutorial!!

[pathu32]

i love the Sizzix origibal dies to cut felt ;)

[grscot4]

Hello, Could you please tell me if the sizzix simply impressions ellison design brass stencils will work with the cuttlebug?

[ldswish]

DOES THIS CUT VINYL TRANSFER TAPE?

[SetYourEgoFree]

Thanks for a great demo video. Can the cuttle bug be used to cut fabric that would be laminated on an adhesive film backing?

[PrimaDonnaCraft]

Very good demo. Thanks for the ino and demo.

[fmduran]

Thank you for showing the different products to use with my Cuttlebug. I can't wait to try them. I been looking for hours to find an easy way to use my Sizzix and Necabilites products

[MsHopem]

thank you sooo much, have been online all morning trying to find out if the original sizzix dies would work in cuttlebug.

[dlp454]

Thanks for this! Very informative and helpful before I buy an "embossing/die cut" machine.

[StellatheDJ]

Hi there,

I want to know why I cannot get the same results as you when I use the Sizzix Sizzlits. I always have trouble with them. They don't seem to cut as good as the other brands of dies. They cut fine with thin paper, but never with any kind of cardstock. Help!

[scrapbookcraze]

thank you for all the info. just bought a cuttlebug with the knowledge that I can use different dies but wasn't sure how they worked. I will mainly use it for embossing since I have my wonderful cricut expression :)

[grazie0316]

Nice video! Very helpful! Hiw about the sissix embossing folder? How can use it with cuttlebug.planning to buy those actually but dont know if its okay.thanks! Grace from norway

[Juanitapixie]

Brilliant - well done! I've been looking for this advice everywhere. Now I can make full use of all the products available. Thank you.

[Toeckti]

Thank you very much Katie, very helpfull !!!

Big hello from Switzerland :-))

[Janzjewelz]

do you have an example with a Marianne Die Cut? Thanks for the video, very helpful indeed

[mehrnazkh]

goodgirlaastha hi, you can order all of these items on ebay

[goodgirlaastha]

Hi Katie,

I am a citizen of India(Delhi) and i just want to know whether these Cuttlebug machines are available in India if yes then kindly let me know where can i get them and if no kindly give the address so as where will it be possible for me to get these products?

[Baje1937]

Do you know of any dies which can make envelopes using the Cuttlebug?

[Baje1937]

Do you know of any dies which can be used with the Cuttlebug which can make envelopes?

[Angela501]

Have you ever try to cut fabric?

[basketballgirl023]

I tried to use a sizzix happy birthday die in my cuttlebug and it won't work. I set it up the same way as you but it doesn't cut through completly and i wasted soo much money on the set.

[PatsTreasuresNCrafts]

@basketballgirl023 Try adding a paper shim (a piece of card stock) on top of your "sandwich". Sometimes you have to do that when using other company's dies in the Cuttlebug. Sometimes you need to use more than one shim. Sometimes you will need to use a thin piece of cardboard. Each machine is calibrated differently. Play with it and you will find a combination that works for you. DO NOT force it through the machine. If you can't get it to crank without force, don't do it. You'll break it.

[Chriscricutcreations]

liked this video cant wait for more

[peach715]

thank you so much for sharing. I wrote this down for a future guide

[Myrrhmade]

Thank you for your video. This will help me a lot as I use different dies in my cuttlebug!

[cherylab66]

if i have sizzlet borders can i use them with the cuttlebug new border plates? How many plates? Or can i only use the sizzlet border plates in cuttlebug

[quilterstitch]

Great info & well presented. I think I prefer the ease of use of the cuttlebug over the Sizzix machine even for Sizzix dies! Thank you.

[nana56041]

Thanks for the info-very well done. Question: Where can I purchase a c plate-my cuttlebug did not come with one? TYVM

[carlove99]

How do you use Spellbinders (metal kind) with my Cuttlebug?

[amicusnemini]

scrap booking is such a low art 

[KraftyKatsy]

thanks for the info :)

[ca3neolsen]

Thank you so much for sharing this. I've looked all over for this machine and I don't seem to find any in my home country, Norway, we're always so late getting great stuff! I've just ordered one machine, and I can't wait until I get it!

[joselinemiranda]

thanks for your video

[AF0093]

I always watch this video over and over. I like the clear explnation I also sub to you please come by my channel and also subscriber:)

Hugs,

Zoe @>>---

Crafty X

[ehodge54]

Hi Katie, How do I use the Stampin' Up texturz plates with the cuttlebug? Thanks!

[ehodge54]

Hi Katie-I have the Stampin' Up Texturz plates but don't know how to use them. Can you help? Thanks!

[TypingTeacher195]

Thank you for sharing!

[AF0093]

Thanks for showing this video I was wondering if Icould use the sizzix originals with my CB. I also subscribed to you:)

[amylucimar]

Great video! So I'm still a bit clueless. Will this do all that the big shot can?

[sesis21]

Hello, Do you have a video on how to shapeablities with the cuttlebug? Like those sunflowers?

Thank you!

[lunadarkfey]

been looking for last hour to see if can use embosslits in cuttlebug..haha and there i find it just top question..... hehe should have come on here earlier..

m xxx

[mermaidzen]

Hi do you know if I can use the xcut dies in the cuttlebug?

[ClouserB]

Fabulous - thanks!!!

[Lindascapper]

thank you for sharing this. i have a couple of dies that i really wanted to try in the bug but was afraid to, not anymore :)

[nette77]

Thanks sooooo much!!!

[SYMONEE02]

great tutorial, keep them going!!!

[nette77]

Hello there! Can I use my Cuttlebug machine with Sizzix Embosslits Alphabet 4-Die Set? I just want to make sure before I order one online. Thanks a lot!!!

[KatiesCraftCorner]

Yes, you can. :)

[WBankson]

I hjave been trying to work a Sizzix XL die with my cuttlebug...have you figured out a way? I did not try putting the B plate part through first.

[ascrapalot]

Thanks..This helped me to decide if I wanted to buy the Big Shot or not.

[Dustyroseify]

Hello,

Will the sizzix embosslits work with cuttlebug?

[KatiesCraftCorner]

I think so. Try the same sandwitch I showed for the Sizzix Sizzlitz.

[PoconoPam]

Thanks for sharing!

[paintbrushtree]

Can you use the Sizzix Bigz  dies/folders in the Cuttlebug??

[OneCraftyChick]

I use them in my Cuttlebug all the time. :)

[kkstarr2186]

thanks for the video, it was very helpful!

[hijole2007]

Thank you so much for the clear explanation! I just subscribed to you :)

[KatiesCraftCorner]

Thanks so much!

[QuiltingConnieB]

bigkick big dies will it go though the cuttlebug thanks for this video big help

[mamaribs1]

do you know is stampin up dies fit in the cuttlebug. This lady dawn does great videos and I wonder if you know about this product. i asked dawn but she wasnt sure.your video is the best thank you very much karen r

[KatiesCraftCorner]

Karen,

Thank you for the nice compliments, I'm glad you're enjoying my videos. And yes, because Stampin Up dies are produced by Sizzix, they will work in the Cuttlebug. Use the sandwich I gave for Sizzix dies in the video. :)

[mamaribs1]

thank you for all your help. I went to Michaels and measured a big die from Sizzix and it does fit on the cuttlebug plate.

I will certainly use your great recipes. Keep em coming.

[imahutchy]

Very helpful!

[notoufu]

Thanks for showing me this !!! awesome tutorial-argh cant wait for my cuttlebug to come ); 1month i can;t wait that long ):

[stshnie]

Katie, thanks for taking the time to show us what you can do with the Cuttlebug.

[marberjo]

Your video was really clear and exciting to watch. Appreciate your sharing of ideas for the Cuttlebug..

[KatiesCraftCorner]

You're welcome! :)

[CakeCorner]

Thank you so much for this info. I was almost buying sizzix dies which was on sale so I asked one person about using sizzix dies in cuttlebug then she said "NO" so I didn't buy.

But because of you I will go get my dies. Thank you so much.

[ceebelle]

Just wanted to say this is a great tutorial. Thank you, very informative. I bought a sizzix die to use in my Cuttlebug, I figured it could be done but had no idea how. Your video was very helpful. Thanks!!