Bedini pulse motor, build and diagram video 1 of 3.(TheDaftman)

[bhaikhurram1]

Hello Sir,

i am thinking if i am use more then one coils, all coils are triggering coils or only one or two coils, other all coils work as a generator coils. what you say sir

thankx

[freethisone]

hi I love your work. Thanks for shearing.

I have a great forum i can refer you too. rwg reasearch or open-source-energy.or

I would love to invite you to become a member, just say freethisone sent you and i get a referral point.. heheh its growing fast and you would be a great help. thank you.

[instantproducts]

Can you build a rotary attraction motor? And post a schematic?

[nourahrmumeenslave]

Lovely

[MEMmaker3]

Top shelf production! VERY cool! Many thanks!

[333kgb]

The negative on the primary battery go’s to the inner 20 gauge wire on the coil which also go’s to the emitter on the transistor and the inner 24 gauge wire from the coil go’s to the collator on the transistor then the neon bulb is connected to the emitter and collator does it matter which way I put the neon bulb? And is there any problems you see in this hookup? Thanks for you help!

[333kgb]

The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery.

[333kgb]

Hi I have been trying to get the bedini motor to work, but the wheel just comes to a stop. My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer.

[angel2indigo]

youtube user AdvancedBedini

[sulijan1355]

best man.

[yeremy838]

Thank you, Daftman...

[yeremy838]

Lielski un viegli viss saprotams, paldies

[iamsuperbleeder]

you need to get yourself a solderless breadboard; it'll make your work MUCH easier

[utube0088]

Thanks for this tutorial , its very very interresting !!!

Is it possible to send me the plan of your project in Hd (to see the direction) with the name of the components ?

Thans again for this nice tutorial, ...with my encouragements to continue.

jim008@live.fr

[utube0088]

Thanks for this tutorial , its very very interresting !!!

Is it possible to send me the plan of your project in Hd (to see the direction) with the name of the components ?

Thans again for this nice tutorial, ...with my encouragements to continue.

jim008@live.fr

[thecozwink]

thank you for the post

[carlosreina100]

thank you very much friend. although it is not your language tedoy thank you greetings from Ecuador South America as maximum There are few people like you and even in my region where ignorance is the daily bread thanks

[wwaltersouza]

Fantastic man. Very well done. That's what I call instructions. Very happy with your explanation. I was far from electronic school for about 15 years. Was all lost. But wanting badly to mount my own bedini. Now l can do so. Thank you for all the videos. Specially next one for the coil. Thank you very much.

W. S.

[pkrska]

I made this and nothing worked. Check out my video.

I found that there was nothing coming to or from the coil wires. Is electricity suppose to come from the coils? Or is electricity suppose to flow to the coils?

[sacopeafe]

Thank you for this fantastic and didactic videos, the best of it's kind, congratulations Sr

[oioioi3000]

Hey,

I have got the Circuit as the Bedini standard yet thing only goes for 12-13 hours. I have used 33 SWG for Trigger and 23 SWG for Power and have placed Neodynium magnets on wheel a good 10mm from Core. What could be wrong? Possibilities?

[24hosting]

Thanks, I missed this the first time I saw the bedini 1 clip. I posted on the forum for the plans. So my appoligies .Thanks for the video's .

[rascalwind]

Great work.  I love how you do this.

[rpraver1]

Could you please email me a copy of your

Bedini

and

Newman

drawings?

Thanx,

Ron

[jeannacav]

I love the way you built this.

Thank you for showing it so clearly.

jeanna

[pkrska]

beautiful looking board, thanks for sharing

[salzahrah]

hey im new to all this,

are the pins metal or something? does it matter what pins you buy? like can they just be saftey pins or something

and what type of wrire is needed to connect all the parts and how does the wire connect to the individual parts? like does the wire just solder on to the pin?

[solorstars]

where do you find the diagrams do you make them or what

[theDaftman]

Look up on the right, click on the (more info) thats in blue under theDaftman.

All the info you need is there.

Or you can google teep.forumco

The Energy Experimenting People forum will come up at the top

Look and click on

Technical help and Questions.

Then click on

TheDaftMans downloadable and printable diagram.

All you need is there.

Thanks.

[24coroneo]

@theDaftman Hello nice work you are very neat .Is it possible to get a clear image of the layout because it is hard to read which way the diodes go and which one is which if you know what I mean

Best Regards

JohnC.

[ehnriko]

Thank you very much for sharing a part of your wisdom to the world. Bridging technical speak to the layman is truly a feat in itself. It's a lot harder to make a complicated thing look easy... I recall seeing a print on a T-shirt that says... "If I made it look so easy, I must be very good then..." :-)

[canadiancarfashion]

I dont mind buying the setup circuit from you I just dont have the time to do it myself blet me know

[Tanui188]

SHOOT! I have watched the video probably 10 times. I went out and bought everything I needed here in Thailand (not easy finding everything). Everything is wired up and NOTHING. One question....will a 9 volt battery power the system or do I need to find some 12 volts? Thanks for your assistance.

[LOOPPEY]

Thank you for making it simple.

[scooterscottii]

THANKSfor all your helpful info! a little question of measurment... When you measure milliamps that the motor draws do you put the meter (in) the circuit in series? How do you measure amps in your batteries? do you put a known resistance in the circuit? What kind of a meter do you use? THANKS! Later ... scooterscottii

[theDaftman]

Sorry for not getting back quicker work and all that.

Should I change it? Yes

Good look and I hope this helps.

Thanks for taking the time to mail me yours the DM.

[tanahiro26]

where can i find this copy?

[theDaftman]

The diagram is on the TEEP forum, the link is on this page of youtube, please look up on the right click on (more info) to see the link.

You will find the diagram in Technical help and Questions.

Look for (TheDaftMans downloadable and printable diagram.)

Please let me know if you need anymore help.

[MrStudyDude]

@theDaftman Do you mock those diagrams up by hand/mind, or do you have a program to do that? This makes this far far easier. PLEASE if there is no program to help out with this, make one ;-P Or... please make more of these diagrams :-D It helps me get my head around it, as a beginner.

[7xperma7]

also if you would know i saw a bedini pulse motor with 4700uf capaciter it said it makes it faster you know where could i place it in this board?

[7xperma7]

hi could you probide a picture of the curcuit diagram please??? or where can i get that from. i am 17 and going big on this like $800 dollars investmet and basic about this with diffent scales or shapes to get the most energy out. do u think i could power a house?

[BeefyCrackers12]

do u have to have the led? and does the resistor have to be the same? or will any work>?

[theDaftman]

LED I think you are referring to the neon bulb and it is needed to help prevent the transistor being damaged. The resistor is what the diagram calls for. Hope that helps.

[rnrraju1531]

hi daftman, Thanks for eloborating the complex circuit in a neat way I have followed ur setup since i am not able to get diode 4001 can i use 4007 instead?? can u explain why its not working if i use 1N4007 instead of 1N4001 or its something else thats going wrong. I followed just what u did. if possible can u mail me a copy of the schematic that u had in the board.

[theDaftman]

Hi, in4007 will work. There is a link on the right of this page for a downloadable diagram.

Look for (more info) click on it then you will see the link. If you need anymore help please ask.

[hopeitshappy]

hi daftman great stuff

i love the way u make things look so neat i will be using your ideas next time thanks

5 stars from me

ps if u wanna make hho ive got some vids

but i think the way to go is plasma spark plugs and water injection

[dapop1001]

Hi daftman, Thank you for the info to build a pulse motor. I am trying to build it. On the 100 ohm R, is it 1/2 wat or 1/8 watt? I found the in4007 diode,but not the in4007, do u know where i could get 1? Icould not find the tip3055 voltage regulater either, is there a place where i can get these online? I am working on a video slide show that i will post when completed. thanks again for all the help

[dreckka]

Excellent! Very Well Done.....

[theDaftman]

thank you.

[dodoshlodo]

thanks for the thorough info Daftman.. I love your videos. I'm just about to start my own bedini/newman project and your videos have really inspired me.. Please keep uploading more videos of your interesting future projects

[theDaftman]

Sorry for my delay in replying.

Thank you for your comments it is appreciated.

We now have a forum where one can discuss are work, please join us.

Please see link to the forum in description on the right of this video.

[SJohnM81]

Very good info. Wish I had seen that before I made a mess with wires and clips etc. Cheers.

[MADHELINELLY]

hi there matey....will this curcuit work on te newman motor.....cheers neil

[theDaftman]

Yes. I'm going to be posting video running a Newman next. But if you have a good look at on of my other videos, ( TheDaftman pulse motor. ) that is a Newman motor just a different configuration.

[querdenker79]

Nice...

[rwp424]

Thanks. I've never taken any electronics courses before. This is great.

Thank you very much.

[BeefyCrackers12]

how do u spell the items needed for the board? ?

[theDaftman]

Please download the picture all info is on it.

You can find the link on this page, look up on the right under Added: April 14, 2008.

Thanks.

[BearWa11ace]

Very useful information... thanks for all your expertise... gunna give this a go... thanks again.

[Eddiev1985]

Wow!

You are helping a lot of people.

Thank you Daftman, excellent work!

Hey everybody, dont forget to rate Daftman's video's, he deserves to be honored.

Eddiev1985

[theDaftman]

Thanks Eddie for your comment. It's nice to see some one having a blast with their hobby.

Daftman

[rpraver1]

May I also get a copy?

Great set of videos.

Thanx

[MoonSpyStudios]

I would love to have a copy also,, great tutorials :) Bill

[labpsycho]

Daftman - Excellent tutorial! Thanks for the hints & tips.

[theDaftman]

You are welcome. Thanks

[USACitizenJames]

Great work!

Awesome vid... any chance I can get a copy of that diagram?

[theDaftman]

Send me your email address and I sent it to you to print off.