So what is this really good for? Your generator must suck a lot of gas and gas prices are at an all time high. I guess you could start a distillery and produce your own ethanol. Then you could separate the gas; learn to fly a blimp and start your own oxygen bar in a trendy neighborhood.
Is there a way to separate h2 from o2 in dry cell. I would like to build domething for hh production and than storage in hydrid container and than drive my car on pure hh.
@davidrrrd yes I am vary scared of them. I have know clue what they could do! Maybe someone else could tell me if in this condition they could be dangerous.
@delvis11 I flinched when your hand touched the Caps. Danger! Any time a Capacitors leads are not shorted together they have the potental to discharge. And a network of caps like yours has a lot of capacitance. The rule of Thumb is Never touch then unless you have shorted them with a shorting probe! God was whaching over you!
@H2O2FromH20 Sorry to scare you. I discharged them before the video. Plus they have been sitting for almost 2 years. I shouldn't have put my hands on them.
@H2O2FromH20@H2O2FromH20 Sorry to scare you. I discharged them before the video. Plus they have been sitting for almost 2 years. I shouldn't have put my hands on them.
@H2O2FromH20 I know this is an old comment I know they couldn't be charged. If he would of put his hand on of those caps charged he would of instantly turned in superman "Able to leap small buildings in a single bound!".
@H2O2FromH20 I know this is an old comment I know they couldn't be charged. If he would of put his hand on those caps charged he would of instantly turned in superman "Able to leap small buildings in a single bound!".
A sonic vibrator will also knock the H and O bubbles off of the plate faces. If you set your cell on a speaker box and put a high frequency signal into the speaker, your bubbles will disengage from the plate faces as soon as they form.
@mikepowers420 Mike I love your comments they make me think. I wish I had the time and money to try some of them. What would be cool would be for you to fire up your channel with your ideas. You would have a huge fallowing and some vary interesting stuff.
the generators i build are 51 plates and they produce 9 litres / minute although i dont use a pump the pressure is enough... i do also build 3 lpm fuel cells... your 20 lpm monster is super!!!! i 've never joined mine but if i join 2x of 51plate-cells i should get about 18 lpm so i totally agree with your total of 20 lpm
have you tried that new circuit 8xa BAck enginereed circuit from stans system
theoneagain 5 months ago
So what is this really good for? Your generator must suck a lot of gas and gas prices are at an all time high. I guess you could start a distillery and produce your own ethanol. Then you could separate the gas; learn to fly a blimp and start your own oxygen bar in a trendy neighborhood.
nightstash1 9 months ago
Hi
Is there a way to separate h2 from o2 in dry cell. I would like to build domething for hh production and than storage in hydrid container and than drive my car on pure hh.
Thanks
oseloth 1 year ago
@oseloth yes this can be done. contact myhydrogencar here on youtube.
delvis11 1 year ago
dude dont get to used to touching those caps, you might blow your hand off!
they need a high voltage cover to protect people from high current discharge potential!
davidrrrd 1 year ago
@davidrrrd yes I am vary scared of them. I have know clue what they could do! Maybe someone else could tell me if in this condition they could be dangerous.
delvis11 1 year ago
@delvis11 I flinched when your hand touched the Caps. Danger! Any time a Capacitors leads are not shorted together they have the potental to discharge. And a network of caps like yours has a lot of capacitance. The rule of Thumb is Never touch then unless you have shorted them with a shorting probe! God was whaching over you!
H2O2FromH20 1 year ago
@H2O2FromH20 Sorry to scare you. I discharged them before the video. Plus they have been sitting for almost 2 years. I shouldn't have put my hands on them.
delvis11 1 year ago
@H2O2FromH20 @H2O2FromH20 Sorry to scare you. I discharged them before the video. Plus they have been sitting for almost 2 years. I shouldn't have put my hands on them.
delvis11 1 year ago
@H2O2FromH20 I know this is an old comment I know they couldn't be charged. If he would of put his hand on of those caps charged he would of instantly turned in superman "Able to leap small buildings in a single bound!".
nightstash1 9 months ago
This has been flagged as spam show
@H2O2FromH20 I know this is an old comment I know they couldn't be charged. If he would of put his hand on those caps charged he would of instantly turned in superman "Able to leap small buildings in a single bound!".
nightstash1 9 months ago
A sonic vibrator will also knock the H and O bubbles off of the plate faces. If you set your cell on a speaker box and put a high frequency signal into the speaker, your bubbles will disengage from the plate faces as soon as they form.
Just tossing that out there for you.
Keep up the very cool work.
Peace.
Mike.
mikepowers420 1 year ago
@mikepowers420 Mike I love your comments they make me think. I wish I had the time and money to try some of them. What would be cool would be for you to fire up your channel with your ideas. You would have a huge fallowing and some vary interesting stuff.
delvis11 1 year ago
ROCK N ROLLLLL !!!
vox1philippines 1 year ago
as always thanx for posting...nice vid
the generators i build are 51 plates and they produce 9 litres / minute although i dont use a pump the pressure is enough... i do also build 3 lpm fuel cells... your 20 lpm monster is super!!!! i 've never joined mine but if i join 2x of 51plate-cells i should get about 18 lpm so i totally agree with your total of 20 lpm
peace4peace from south africa
robbieYAHU 1 year ago