"Antigravity" Method 8 of 15, Dia-magnetic pyrolytic graphite, bismuth etc, Group IIB(ii)

[JOHNROMANIWASZKO]

Hi fronkenpoop, As to your comment about “not antigravity” please refer to my “Antigravity” Method 1a, the opening credits will hopefully explain it to you, or read description on my channel. This will hopefully make it clear to you as for the reason of the presentation, in short to show people that use the word “antigravity” what is real as oppsed to what is not repeatable scientifically , and the reason why the series is called “Antigravity” –The reality.

Thanks for your comment. JRI

[PhotonDrive]

@JOHNROMANIWASZKO John I use Levitation rather than "antigravity", but Grav-Displacement would be better? Bushman asks "Why are all observed Galaxies moving apart?" (They ARE composed of MATTER, are they not?) I find your Alum/Copper meas. pretty accurate. I have used both, HOPING THAT AC coils UNDER the spinning Turbine would "Refresh" like Tube drop slowing. Hasn't worked - even blocked AC (& DC too) output! Like to make Turbines self-spinning with Eddy-input. Have you tried?

[JOHNROMANIWASZKO]

Hi PhotonDrive, Yes “antigravity” levitation, gravity displacement sounds good, the semantics of it all! It is believed that new space-time is created as the universe ages hence the expansion; it could be considered as an “antigravity” effect, but because of the local gravitational effects, from the sun, planets, moons etc, are far stronger than the force of expansion it appears to be of little consequence to us unless we can achieve space time in abundance, now wouldn’t that be clever!

[JOHNROMANIWASZKO]

@PhotonDrive As for AC coils under a spinning turbine, I’m sorry I cannot comment as I don’t understand exactly what you have tried. I have seen some of your vids; and highly recommend your site to the viewers, you have achieved some remarkable work, keep it up. In one of your videos you rotate a mill with magnets with compressed air and achieve levitation over dc powered coils, under my classification this would be Method 6, Magnetic Mono Pivot or Zippe type centrifuge, Group IIA(ii).

[JOHNROMANIWASZKO]

@PhotonDrive The closest I invented so far is a spinning magnet that levitates when spun overhead by a larger magnet over an aluminum plate, refer method 11 of 15 Electrodynamic Suspension EDS Induced (eddy) currents Relative Motion, this may interest you. Alternatively refer Method 12 of 15, Electromagnetic Fields DC Pulse, AC LF, & HF Group IIIBii were I show Tesla’s egg of Columbus,

[JOHNROMANIWASZKO]

@PhotonDrive then a simpler derivative I devised which uses a embed magnet within aluminum spinning via a simple ac induction coil.

I have far more elaborate plans on the drawing board that contain many magnets somewhat reminiscent of a SEG that I plan to experiment with in the near future, that will achieve levitation over aluminum/ copper plates.

Thanks for your interest my fellow experimenter. I wish you luck with your hard work and many labours. Cheers JRI

[JOHNROMANIWASZKO]

@PhotonDrive PS Method 9 of 15, Magnetic Gyroscopic, Group IIC and Method 13 of 15 Gyroscopic Mechanical Electromechanical Inertial centrifugal Group IV may also interest you

[PhotonDrive]

Thanks for mentioning materials OTHER than parolytic carbon & Bismuth as Diamagnetic. It seems that aluminum only makes coils float on AC charge flux-change. In other words diamagnetic property must be "refreshed" continually. Why is this?

[JOHNROMANIWASZKO]

Hi PhotonDrive, Your most welcome I felt the presentation would not be complete without mentioning them. As for your comment about only aluminium, making coils float is not true. The effect requires non-ferromagnetic but highly conductive materials like aluminum or copper, as the ferromagnetic ones are also strongly attracted to the electromagnet.

[JOHNROMANIWASZKO]

@PhotonDrive A magnetic field will repel all metals, in particular good conductors like copper and aluminium, where the repulsion force will exist for a short moment after the magnet approaches the metal. Both copper and aluminium will therefore cause a coil to levitate when eddy currents are generated in a good conductor, if subjected to a time-varying magnetic flux that can be provided by AC.

[JOHNROMANIWASZKO]

@PhotonDrive The interaction of the eddy currents with the magnetic flux generates a force that levitates the body identified through the use of Maxwell’s equations. The skin depth formula is used to calculate the depth of required conducting metal plate which is: - d=Squareroot (1/pie.f.u.o) where f is frequency, u, the magnetic permeability of the metal plate and o the electrical conductivity of the plate.

[JOHNROMANIWASZKO]

@PhotonDrive The magnetic field inside a conducting plate will decay with this characteristic depth d. Therefore any non ferrous conducting metal will work; the key factors are the magnetic permeability and electrical conductivity of the material that a coil will levitate on.

[JOHNROMANIWASZKO]

@PhotonDrive Aluminium and copper have a similar magnetic permeability, copper has a greater conductivity therefore a thinner copper sheet is required for a given frequency, for example at 50Hz, I calculate that a 12mm plate is required for aluminium and a 9.35mm plate for a copper plate, increasing the frequency also decreases the plate thickness required. It is the changing magnetic flux that needs to be refreshed, to create continuous levitation. I hope this helped. Cheers JRI

[bonerliscous]

thats pretty cool! way to go!

[greenheadjoe]

great video

[JOHNROMANIWASZKO]

Hi greenheadjoe, Thanks for your kind comment and appreciation.

Cheers JRI

[foozbong]

This is one of the best videos, on that subject, I have seen yet. Great job!

[JOHNROMANIWASZKO]

Hi foozbong,

Thanks for your kind comment and appreciation.

Cheers JRI

[tinman842]

get fkn real we can move faster than man can with stand rite now...... the human body cant take the g forces involved in monervering like a ufo.... are uav.s can already match and out perform your lame ideas of ufo. s...

[JOHNROMANIWASZKO]

Hi tinman842,

I never mentioned anything about speed, manoeuvring, ufos, or out performing anything, Im sorry that you misinterpreted my presentation which demonstrates 15 methods of levitation that I have classified with heavier than air devices usually referred to as antigravity as they achieve flight without propellers, jets or rocket propulsion, nothing more nothing less, to hopefully encourage more work in this field. Thanks for your comment.

[20Estevenson]

Get fkn real! the technology used in what some people have claimed to be "alien craft" creates an artificial field of gravity around the craft. NO G's!

[JOHNROMANIWASZKO]

As a means for space propulsion the magnetic field vector is replaced by the Earth's magnetic field by applying the Lorentz equation the force exerted on the spacecraft depends on the length, number and current carrying capacity of the cable which could also be cryogenically cooled conductors.

[JOHNROMANIWASZKO]

According to current scientific reasoning the magnetic field of the earth is between .3 and .6 gauss, in a MRI the magnetic field are in the range of 0.5-Tesla to 3.0-Tesla, or 5,000 to 30,000 gauss, some of the strongest magnets are 60 Tesla. Now, to even consider any thing light enough and powerful enough to repel the earths magnetic field is believed to be outside our current technology we have today. From my understanding back in 1996 I show one way I believed it could be done.

[JOHNROMANIWASZKO]

Tudortube please refer to Antigravity" response to Method 6 & 9 by popular demand, how to levitate on earth's magnetic field. This edit was intended not to be shown but is thrown in by popular demand as interested people have been asking the same question mainly if it is possible to levitate on the Earths magnetic field,

[AVAMagneticlev]

Wounderful vids I like this one the most !