I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. I am looking for $30 000 for a prototype and for $3M for patents. Making a 6 kW generator will cost $1200 in mass production.
Does water evaporation has something to do with generating current in the coil? The transition from droplets to air particles could be part of the effect.
I think it is connected at the 5,6 wires to the motor, right?
I find it fascinating that it works withOUT an external make and break, which is how I READ the patent. He said "the normal make and break" as though there were no other element than this. so.. please tell me the mA requirement for that very small motor, or the mA that you can see happening.
what kind of motor are you using? again great work in all of your experiments you have gone that step beyond many of us been dreaming about, thanks for sharing
Thancks for the video! I see 4 wires at the top of the coil . From left to right left being #1 Is that iron or copper? #2 left side of the core wire iron or copper connected to anything? #3 rightside of the core same question as #2? and #4 the positive side if the color is correct? I want to replicate this. On the patent I saw a secondary is that on your coil too? Thanks!
Very well done! This proves that your cotton covered wire is doing the trick. All of my Stubblefield coils always performed better in the ground then when wet on my table. I would bet that yours will too.
When it rained, my volts and mA's went down, but as it dried out, everything got better.
А как изготовлена сама катушка?
Nnn90100 1 month ago
IT WIL WORK BET WIT DE AERON COVER EN DE COPR NOT
01nirolf 9 months ago
what local retail store can i get a coil? copper coil, and does it have to be insulated or open?
do i have to go to walmart?
MopDMTBARTL 9 months ago
Its called a battery....LOL
FreeEnergyNow1 1 year ago 7
This has been flagged as spam show
Free Energy is real and its here! The Oil companies r doing everything they can to stop this
information. If you want a Free energy magnet motor , get the blueprints at LT-MAGNET-MOTORdotCOM , Join the
revolution!
hungarylnnjsd 1 year ago
its a battery , iron core , copper wire.
Mastahscott 1 year ago
This has been flagged as spam show
I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. I am looking for $30 000 for a prototype and for $3M for patents. Making a 6 kW generator will cost $1200 in mass production.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
whats inbetween the coils and the bolt
clin1392 1 year ago
How about quickly explaining the principle and construction .... ? thanks for sharing the moving pictures.
YoLninYo 1 year ago
Does water evaporation has something to do with generating current in the coil? The transition from droplets to air particles could be part of the effect.
Anothercoilgun 1 year ago
@Anothercoilgun its the iron oxidizing, thats why you dont want to much water as it will prevent oxygen entering and making the free ions
HomeDistiller 9 months ago
Water ionizes as it evaporates thus giving you a flow of electrons
rascalwind 1 year ago
@rascalwind you mean the water acts as a catalyst to speed up the iron oxidizing, same idea in his Mg air battery but the Mg is much more reactive
HomeDistiller 9 months ago
Laser
How long did this run just on the damp wire?
I think it is connected at the 5,6 wires to the motor, right?
I find it fascinating that it works withOUT an external make and break, which is how I READ the patent. He said "the normal make and break" as though there were no other element than this. so.. please tell me the mA requirement for that very small motor, or the mA that you can see happening.
Thank you
jeanna
jeannacav 1 year ago
sweet lol....
nice one man
BodkinsEnergy 1 year ago
great vid! im have a couple questions though
where did u get iron wire, all i can find is galvanized iron wire, or did you use that?
zeusapollo123 2 years ago 3
@zeusapollo123 You can buy rolls of soft Iron wire at Home Depot and Lowes.
Look in the concret section. It is used to tie rebar together.
RHEAD100 1 year ago
@RHEAD100 - where do you get all the copper wire?
MopDMTBARTL 9 months ago
@MopDMTBARTL I think you have me mixed up with someone else.
RHEAD100 9 months ago
@zeusapollo123 ... That is a good answer?
CTR831 6 months ago
@CTR831 what post are you referring to
zeusapollo123 6 months ago
what kind of motor are you using? again great work in all of your experiments you have gone that step beyond many of us been dreaming about, thanks for sharing
kukulcangod1 2 years ago
Thancks for the video! I see 4 wires at the top of the coil . From left to right left being #1 Is that iron or copper? #2 left side of the core wire iron or copper connected to anything? #3 rightside of the core same question as #2? and #4 the positive side if the color is correct? I want to replicate this. On the patent I saw a secondary is that on your coil too? Thanks!
uncleshorty 2 years ago
Do you know now how long it ran or is it still doing that....?
JavaLessons 2 years ago
Thank you very much for your exp. Appreciate the video and posting the results. Keep up the good work.
killzpwnz0red 2 years ago
Laser:
Very well done! This proves that your cotton covered wire is doing the trick. All of my Stubblefield coils always performed better in the ground then when wet on my table. I would bet that yours will too.
When it rained, my volts and mA's went down, but as it dried out, everything got better.
Again, very well done and please keep us posted.
Bill
Pirate88179 2 years ago
Cool !
Keep on going.
Please let us know the result.
Thanks you for video.
chungsan1 2 years ago