Invert mini Problem fix

[crazycobra187]

you think thats enough lube..LOL

[Airsoftm4formenators]

Hey geasslver, Thank you for the video so the ball drops out of the barrel when it is not lubed?

[ThePAINTBALLER1023]

Thanks man

[wehatealena]

I just got an invert mini today and when I turn it in an go to shoot it with out the air hooked up to it it dosent make the chick noise

Please help don't know alot about paintball

[IAPaintball]

@wehatealena Hold the trigger down before and while powering on the gun. this will turn your gun on with the eyes off. therefor letting your solenoid click without there being balls in the gun

[JMTkawi]

so do you only lube the orings or the whole bolt and everything

[Tekno7ik]

Quick question for you. For some reason my mini is eating HPA like theres no tomrrow. I have a 300 psi ninja tank. And it says its good for 500 balls roughly but mine only gets like 250 PSI is set at around 160 Any thoughts on why this is happening? Theres no leaks i left a tank in to see if it was leaking and it wasnt.

Thanks

Mike

[EatMe410]

YOUR FINGERS ARE FAT AS FUCK!

[Paintballer2011541]

hey um im have trouble shooting faster than about 17bps with my mini.... one day it works and the next it doesnt... its complete bullshit and im getting very angry...the 20bps ramping skips balls and breeaks emm too, help please its an on and offf situation.

[airsofter2318]

my invert mini is leaking out of the black tube thing inside the handgrips check out my video

[alexlek771]

canu make a vid or tell me how do i make velicoty back to starnd

[Bobes555]

so my mini was shooting like one normal shot then like 10 that went like 2 feet. i thought at the time it was a trigger problem (yeah idk) so i did that. then i didn't fire at all. if i get the trigger back to normal would it work fine (i took it apart and lubed it up not to long ago)?

[geasslver]

@Bobes555 it cant be the trigger cause it has nothing to do w teh fps it just needs lube

[Bobes555]

@geasslver thanks. now i just have to get the trigger back in place correctly (i forgot to say that i attempted to adjust the trigger and sort of screwed like everything up with that). i foresee much trial and error in my future.

[Thejpm69]

Should i get the ibcert mini or the slg

[Paintballer2011541]

Ok so I am having problem with my mini. It skips balls when firing psp 25 bps

[geasslver]

@Paintballer2011541 well its probably your fingers

[PaintballPlayer157]

@Paintballer2011541 Your Fingers or your Loader

[MrRickahlack831]

i just got a Mini off my friend......im having a problem with it....when i hook up the tank to it starts leaking air from middle of the gun almost underneath the bolt and around the trigger i figure its from there because you can feel the air rushing out. I dont know how to stop the leaking...alot of ppl say its the ASA.....how do i know for sure wheres its coming from?

[PaintballPlayer157]

@MrRickahlack831 Hope it isn't too late... Check your bolt Orings and then if that doesn't work disassemble it and check that odd looking Oring on the Air Transfer Plate.

[Echoasity]

air is leaking from like the bolt

[geasslver]

@Echoasity o ring or needs to be lubed

[Echoasity]

@geasslver i check the oring seem fine and i lubed it

[loopymoofart]

minie is like tripple shoting reall fas for like three seconds then it goes back to normal. without air

[geasslver]

@loopymoofart is it on psp

[loopymoofart]

@geasslver no it was on semi. i am not a newb

[geasslver]

@loopymoofart so is the solinoid clicking over and over if thats true make shure the wires are fastened in or if not it may be eiather the solinoid is blown or the board is fried or defective

[loopymoofart]

@geasslver i think i fixe it. i took off the foregrip and the connected it again and it does not do it anymore

[tray20111]

i got a spyde i'm going to get a mini

[mrjoshisdank]

my mini is leaking out of the feed neck....how do i fix this

[The4Pandas]

The spring the launches the paintball in my mini doesnt come all the way back so my paint doesnt come down the neck if my gun so it stops shooting. You know what it might be?

[martiallaw565]

My invert mini seems to leaking either from the ASA or the meeting of the two male/female air transfer tubes. Advice? I replaced the o rings.

[videogameplays101]

Hey man, mini is leaking out the barrel and feedneck. don't know much about these.

[geasslver]

@videogameplays101 out of their are you getting enough air pressure and is your bolt all the way back or is it jammed lube it and then air it up again after you take the bolt out and lube it

[videogameplays101]

@geasslver It was the poppet, I have the gen 1, so I had to reset it.

[islandassasins]

@videogameplays101 change ur o rigns

[islandassasins]

i turn my mini on and i could put eyes on or off then i have to sit there and ride the trigger forl ike 1 minute befor it starts shooting

[chova1123]

I believe it was in fine. I also don't think it was asa problem bcuz the gauge on asa read 200psi. The gun was doing the same your gun was doing but you said all you did was lube it up and I did that.

[chova1123]

hey great video but I just got my gun properly lubed up from the pb shop and went out the next and my gun was shooting fine at one shot but when i start to ramp the trigger the gun makes that bogging noise and the balls start to drop. What the hell is that?

[geasslver]

@chova1123 if u have a normal asa n the gun screw the tak in moar cause the origional asa is hard to screw in so lube up the tank threads and screw the tank in all the way

[geasslver]

@camper5657 what are u talking about no gun lubes itself that how u BREAK A GUN u shuld lube a gun every 2 to 3 cases AT THE LEAST!!!

[SiCKo372]

this gun is badass dude i got one no problems shot it straight outta the box shooting ropes like madness and my friend got a 2010 slg and has problems

[peakworkouts]

hey um my bolt is to far forward so the paint wont even feed into the gun how can i fix that ? i have tryed everything ! HELP !!!

[geasslver]

@peakworkouts push it back take apart the bolt and lube it and if its still forward push it with a squegee

[peakworkouts]

@geasslver ok i will try that thanks

[drivethrupranksters1]

yo dude i got the exact gun an everytime i try an hook up my tank the air just runs thru the whole chamber i dont know what to do?

[geasslver]

@drivethrupranksters1 make shure the bolt isnt stuck forward take your bolt out and put some lube on the oringsand make shure the bolt isnt forward and after you take it out and lube it try it again

[omni3196]

ok so i but new baterie nd it dont turn on nd when it do it'll stay on for maybe two min's nd go's off wut now?

[geasslver]

@omni3196 my friend had the same problem with his after he dived into a snake filled with watter but now i think your board is gone fried and dead jsut get a new board like a 7th element costs 10 dollars more than the origional and is pretty much a virtue

[branden0walker]

your a tool! do you even know what your talking about?? bullets? spyders..... ha

[omni3196]

ok so when i put the air in it don't go thru and i think my trigger dont work i wish know what was wrong with it can u help me?

[geasslver]

@omni3196 Thats defiantly a baterie problem

[GiassThis]

hey my inver mini broke yester day..i was shooting it and all of the sudden it stopped firing and the tank started shotting out of barrel without me hitting the trigger and when i did the balls would not go..what may be wrong??

[geasslver]

@GiassThis ur bolt may be slipping lube the bolt, it might be the batterie or ur whole trigger assembly might be busted..that would suck so lube the bolt and then put a new batterie in and if that doesnt work make a video so i can see whats going wrong

[fluffywaffle1]

it shouldnt come like that but that gun is so cool