Looks like nice work; did you really put just a level on top of the deck surface- parallelism to the floor really is of no importance- or did you run an indicator in X&Y axes before you swept the bore to be sure the existing surface was paralell to the table travels?
Since I hever did one of those, my guess is probably te same way - bore the block to fit a larger bore cylinder. Take a look at the cylinder kit and see what the instructions have to say.
only you can do this? thats what the desciption said. looks pretty damn simple. i think i could probably do this with the right stuff. and can you bore out a ford 200 six? i need some power out of it. what about valve jobs and shit? message me if you are interested.
If you've got the equipment and skill, anybody should be able to figure this out. Yes, boring the 200 is no problem, valve jobs and other shit - no problem either.
I have a question, you have only widened the hole and you put a cylinder is gate largest and strongest engine?
GodfatherMaxi 11 months ago
California
fiatnutz 1 year ago
? what state you in?
T5646766 1 year ago
ive done this with a dremel tool. takes longer but same thing. also can use a dremel tool too open up the crank case area too put in a stroker crank.
warmonkey80 1 year ago
Where Did you get that drill bit ? or How can you use it?
arvc2911 1 year ago
Looks like nice work; did you really put just a level on top of the deck surface- parallelism to the floor really is of no importance- or did you run an indicator in X&Y axes before you swept the bore to be sure the existing surface was paralell to the table travels?
ridemyrice 2 years ago
Do you know What the Customer had to say about the Displacement increase?
k9forkids 2 years ago
I think he said it took the displacement from 50cc to 80cc.
fiatnutz 2 years ago
no my friend it is a 30ccm increase , 150ccm-180ccm
k9forkids 2 years ago
@fiatnutz he said 150cc to 180cc
XRCnitro 1 year ago
@k9forkids 150-180cc
wippy748s 1 year ago
how do u fit a bore kit on a honda NSR 50
RyMu2k8 2 years ago
Since I hever did one of those, my guess is probably te same way - bore the block to fit a larger bore cylinder. Take a look at the cylinder kit and see what the instructions have to say.
fiatnutz 2 years ago
only you can do this? thats what the desciption said. looks pretty damn simple. i think i could probably do this with the right stuff. and can you bore out a ford 200 six? i need some power out of it. what about valve jobs and shit? message me if you are interested.
willdog3 2 years ago
If you've got the equipment and skill, anybody should be able to figure this out. Yes, boring the 200 is no problem, valve jobs and other shit - no problem either.
fiatnutz 2 years ago 4
John if you bump up another 30cc does it give more power than before?
pantherxx010 2 years ago
it should or somethings not right.
4x4Mudmaster 2 years ago
He also has a big valve head and claims that his top speed will approach 80 mph, up from 60 mph. That's all I know.
fiatnutz 2 years ago
more displacement = more power
which usually equals more speed unless u are limited by gear ratios, ect.
MCRmechanic 2 years ago 3
will this guys let you know if he getting more speed?
pantherxx010 2 years ago
Great to see the machining vids again! They don't leave me hungry! lol
MrGuvEuroman 2 years ago 5