In my school, I have those Wheelock 34T-24 alarms, but they are 7004Ts, and they have a strobe, they skip when the strobe flashes, and they are coded to continous.
I saw one of the similar Pull stations but when you pulled it down it would turn the alarm on but you could reset it by just pushing the handle back up and it would reset the alarm. How did this occur? I thought you need a screwdriver to reset. Is there such a model that you can push it back up with a hand as opposed to a tool? Or was this a faulty pull station? Please PM me thanks.
Maybe not with most panels, but the hotel was coding the 4901-9820 horns differently than the TrueAlert horn/strobes. I'm guessing if the panel can't do multiple codings, they must've had some relay devices connected to it.
If I knew the annunciator, I could probably tell you what panel they had. But the 4010 and 4008 are both addressable. The 4008 can have differently coded NAC's. But on the 4100U, 4006, and 4005, you need a whole different 4-output NAC card.
Wait... if the 9820 horns were in continuous and truealerts in code-3, they might be smartsync truealerts. They could be going in to a sync module, which provides temporal code-3 automatically.
O.O you blew a fuse on this? lucky, you've got like 3 NACs, and i've only got one! i did the same as you, except MS-2s and MS-4s don't like electromechanical horns or horn/strobes or anything made by Simplex.
Cool, the 34T brings back many memories, as my school had those on continious, but they have been replaced by a new system consisting of Wheelock ZNS series.
ya those two alarms are two of the loudest so WOW
ramyramram234 1 month ago
Spectralerts....never herd 1 in real life but comments tell me might wana cover my ears when i pass one
sheiklink64 2 months ago
This is my favorit vid... SpectrAlerts are SOOO loud
NudgeyBear5567 3 months ago 3
The alarms sound like they were made for each other.
thebiggreen101 6 months ago
two noticable things:
1) pull fail!
2) the alarms had a pretty good beat.
Eternityglacier 6 months ago 3
Did you mount that system yourself?
SpecializedChild462 9 months ago
lol pull station fail
crazyboy72375 11 months ago
In my school, I have those Wheelock 34T-24 alarms, but they are 7004Ts, and they have a strobe, they skip when the strobe flashes, and they are coded to continous.
NEVDAVS1970 11 months ago
@NEVDAVS1970 It is not a 7004T then. It is a 7002T.
Tabby266 7 months ago
I'm curious what do you use to power a fire alarm panel?
hyperbaricchicken101 1 year ago
@hyperbaricchicken101 A power cord, and a power supply.
Tabby266 7 months ago
how do you make the 34t go marchtime?
megabobolink 1 year ago
iz in ur panel changing ur settings
rockerzac99 1 year ago
really nice setup keep up the good work
Heyde1979 1 year ago
how long did that take you
michaelshow00 2 years ago
I saw one of the similar Pull stations but when you pulled it down it would turn the alarm on but you could reset it by just pushing the handle back up and it would reset the alarm. How did this occur? I thought you need a screwdriver to reset. Is there such a model that you can push it back up with a hand as opposed to a tool? Or was this a faulty pull station? Please PM me thanks.
.
travelplus1 2 years ago
Comment removed
Tabby266 1 year ago
Was this SpectrAlert Advance P4R set to coded in this video?
DVaccarelli1988 2 years ago
you sound like alarm56
alarm776 2 years ago
It's possible with Simplex panels too. I learned that a few years ago at a hotel at 3 in the morning.
kidsruledude 2 years ago
No, it actually isn't possible.
coffeeandsugar20 2 years ago
Maybe not with most panels, but the hotel was coding the 4901-9820 horns differently than the TrueAlert horn/strobes. I'm guessing if the panel can't do multiple codings, they must've had some relay devices connected to it.
kidsruledude 2 years ago
If I knew the annunciator, I could probably tell you what panel they had. But the 4010 and 4008 are both addressable. The 4008 can have differently coded NAC's. But on the 4100U, 4006, and 4005, you need a whole different 4-output NAC card.
coffeeandsugar20 2 years ago
Wait... if the 9820 horns were in continuous and truealerts in code-3, they might be smartsync truealerts. They could be going in to a sync module, which provides temporal code-3 automatically.
coffeeandsugar20 2 years ago
haha. sooo.. the pull station was probably not in fire code at first ;) nice system. they sound pretty legit together :D
davidtherockstar568 2 years ago
Those sound really good together!
nckek 2 years ago
great video. could you possibly do a video with the 34T on continuous along with the spectra alert advance on code 3 please? Thank you
Capt421 2 years ago
He could probably code the Spectr alert advance on the same NAC.
coffeeandsugar20 2 years ago
1:31
alarm741 2 years ago
they sound sweet together!
jooiiee1 2 years ago
sweet
tornadofreak1994 2 years ago
O.O you blew a fuse on this? lucky, you've got like 3 NACs, and i've only got one! i did the same as you, except MS-2s and MS-4s don't like electromechanical horns or horn/strobes or anything made by Simplex.
pivotous 2 years ago
i have a zi6. ITS THE BEST CAMERA IN THE WORLD!
firealarm211 2 years ago
Kodak ZI6? I've been thinking about getting one of those
coffeeandsugar20 2 years ago
You should get it.
They are at Radio Shack.
It shoots in true HD.
firealarm211 2 years ago
I got one.
coffeeandsugar20 2 years ago
Cool, the 34T brings back many memories, as my school had those on continious, but they have been replaced by a new system consisting of Wheelock ZNS series.
TDFG4602 2 years ago
That is cool :)
jjinc24 2 years ago
I love this.
coffeeandsugar20 2 years ago