Ergotech Triple Monitor Desk Stand - WSGF Review

[WSGF]

Yes, but there may be a gap in between the monitors if they pivots hit at the joints, or you may have to shift the monitors off center.

[ThatThing95]

is it possible to just use it with two monitors?

[coils69]

Thank you for the review, it helped me decide which stand to buy.

Those looking at the XFX stand, I looked into that too, the only difference between that and this one is the base. If you need/want a base that has USB & headphone/mic hook ups, looks like a stealth plane and cost more get the XFX. If you don't care about the base and want to save a few bucks get this brand. I just ordered one of these with the extendable wings from MountedConcepts and it was still $100 cheaper then the XFX.

[MeanMachine600]

Which one would you choose yourself?

XFX Triple Monitor Stand

or in the in this video used

Ergotech 100-D16-B03

i myself am a bit afraid that it's not 100% possible to get rid of the gap in between the monitors with this Ergotech stand. Aswell the cablemanagement doesn't seem o be that great

thanks in advance

[kayden3]

You can pick this up at Amazon for $204 right now (9-5-2011). I have been wanting a stand for a while and I just now committed to getting this one.

[SHERIFFWoody]

GREAT info bro thks keep up the good job - looking to get one of these fo my setup soon

[walkerdarin2003]

Where did you get your desk from? I am having trouble finding an idle triple monitor desk. Thanks!

[darksau]

Could you give me a quick measure how tall this thing is? As in how "high" does the center pole go? Thanks! :)

[sniperguy339]

what size monitors are those in your video??

[WSGF]

@sniperguy339 Those are 22" 16:10 panels.

[TheA10FAN]

whats the biggest size montiors you can mount on your stand??

[WSGF]

@TheA10FAN I've had 3x 24" Dell U2410. You might be able to do more.

[emkplayboy6]

This looks like it would easily hold up to three 23" wide screen monitors am I correct?

[WSGF]

@emkplayboy6 Yes. I've had three 24" Dell U2410 monitors on it.

[emkplayboy6]

@WSGF When I click on the link to take me to buy this stand it says 404 Not found

Sorry, the requested page does not exist or is no longer available.

Please visit our home page, or use the search box.

[gerv55]

I can still see a slight gap on the left hand monitor. Is it possible to get them tight together so theres no gap?

[WSGF]

@gerv55 Yes, with time you can get them with no gap.

[soulpatchable]

It will hold up to 24" monitors for the standard , above that you will need telescoping wings.

[lg123xyz]

Excellent review thanks. I'm looking for a tripple monitor stand and seems this one has more adjustments than the Ergotron LX.

[LauwereysM]

3:22 hl2 :D

[LauwereysM]

What monitors can i add to this, can i add 24 inch onces?

[WSGF]

@LauwereysM Yes. It can do up to 24" without an issue.

[quaz18]

will this hold 3 25' monitors?

[WSGF]

@quaz18 It might, depending on the total size and weight. You would certainly need the telescoping wings.

[OhmWolf]

What monitors were used in this review? I was thinking of getting this for my 24" monitors, and wanted to make sure they would fit.

[jewpiles]

@OhmWolf Dell U2410's. I ahve teh same size displays, and 30 degree ang;es is mroe than i currently use on my 3x1 desk-mount arms... Pretty sure I'll order one of these thigns pretty soon.. having a single stand would make thigns sooo muc easier.

[Hekynn]

Question will this stand support 3 Asus Nvidia 3D 23 inch widescreen screens? Been researching on stands for my future triple monitor setup. :)

[ClemWilliamsonSnide]

I really liked this! I picked up another 2 LCDs to set up an Eyefinity group with medium-size (20.1") monitors, and since I like a larger angle on the wings than most linear stands allow, you pretty much sold me on the stand (with the optional pivoting arms, as snakesnarroz mentioned.

[mygaffer]

I need a triple monitor stand that will let me use one 30" panel in the center with 2 20" panels in portrait mode on either side of it.

Can someone please let me know of any that will work?

[HardcoreMarek]

EPIC!

[robertozube]

I have this stand, the only problem I have is that I can't remove the acer monitor stands, so I still have the stems hanging down from each monitor.

[guidorosso]

Thanks for this review and for the coupon code! Do you know if this would work with a 30" in the middle and 2x 20" in portrait on the sides? Looks like it should handle it fine (especially with the telescopic arms) but curious if you you know specifically...

[mygaffer]

@guidorosso I want to do the same thing and its been frustrating looking for a stand. Mine are 1 3007wfp-hc and 2x2007fp

[spikecellwarrior1]

OMFG I LOVE YOU FOR MAKING THIS VID Itottally needed  it :DDD

[ezzydamvp]

how much does it cost?

[WSGF]

@ezzydamvp Prices start at $299. There is a 10% off coupon on the WSGF. It's linked in every forum.

[snakesnarroz]

The pivots shown in this video cost extra. The standard pivots you receive are not as good as these. The standard pivots don't adjust the monitor tilt at all. Overall its an ok product, but the standard pivots are poorly made in my opinion, spend the extra money and get the better pivots.

[provoko]

Wow, much better than your last review and a lot more pictures.

However, reading off a script you wrote your self sounds bland, like i'm learning something in school. You could try writing your self an outline and improving the rest, I mean if you reviewed this product you should know what to say already. =)

[WSGF]

None of this was read off a script. This was all done live to tape while I was reviewing. There were a few pieces of audio I went back and recorded after the fact, but it was all improvised.

[ethr95awd]

excellent vid 5*

which game are you showing on the screens?

[WSGF]

Half Life 2: Episode 2

It is the benchmark run from the HOC Bench Tool

[reggianodoc]

nice review :D