i've just recently gotten back into flying for a while and not doing so bad. I have a walkera dragonfly 4, an exceed RC Falcon 40, and a xeida 9958. I have already received word from a hobby shop that walker and exceedrc aren't really good and i should get a blade 120SR. I can do some good hovering, boxes, and started doing circuits with the micro xeida. Should i upgrade to an mcpx or a 450 once i get circuits? or should i stick with 4ch fp helis for a little longer?
Here's a link to proper take off. "Don't touch the right stick on takeoff" is a myth. Please stop spreading misinformation. These things are expensive.
@SeshSoldier Well no, if you are planning on getting into CP helis these things are great for beginners. I honlestly have to say going from Coax to CP is like learning all over again.
Nice Vid!!! I know u said light gentle movements with the sticks...I have one & mine has a mind of it's own during take-offs any tips for takeoffs...mine seems to be tipping,either to the left /right or foward.....any advise would be greatly appreciated...I only have exp with coaxials..also,.did I jump to far ahead of myself with this Heli? Thanks -Rob
@pj1980123 Yeah that I know...but just found out the left servo never worked right outta the box....had to send back,waiting for return to get going ...thanks
@pj1980123 Tried this "no imputs from right stick until in the air" idea after two weeks of flying virtually crashless and finally mastering turns. Thanks. You owe me a canopy support rod now.
@robbie2737 You should have gone to single rotor fixed pitch first. That is the next step after coaxial. Get a blade msr or msr 120. I havent tried the msr x but i heard that is even easier than the msrs. You should put the mcp x on the shelf for a while and master sr fixed pitch then go back to it.
@CHoP69PeR Found out heli had a bad servo out of the box...In the meanwhile I bought the mSR plus a 120SR..no problems ..love it...now I'm back to the mCPX..no troubles at all after replacing servo..However,I'm still in the hovering stage..Thx again
i've just recently gotten back into flying for a while and not doing so bad. I have a walkera dragonfly 4, an exceed RC Falcon 40, and a xeida 9958. I have already received word from a hobby shop that walker and exceedrc aren't really good and i should get a blade 120SR. I can do some good hovering, boxes, and started doing circuits with the micro xeida. Should i upgrade to an mcpx or a 450 once i get circuits? or should i stick with 4ch fp helis for a little longer?
XYZslayer 1 month ago
@XYZslayer get a mcpx now trust me you will love her
pj1980123 1 month ago
Nice flying! I love it!
beefjr22 1 month ago
Here's a link to proper take off. "Don't touch the right stick on takeoff" is a myth. Please stop spreading misinformation. These things are expensive.
helifreak . com/showthread . php?t=367531
ZeerosFate 1 month ago
@ZeerosFate thanks for the help but i got it bro i fly so hes got all the help he needs look at my fling videos and you will see
pj1980123 1 month ago
@pj1980123 You're welcome.
ZeerosFate 1 month ago
Fantastic Flying. I bet he rips up the msr!
CHoP69PeR 2 months ago
hes doing a good job!
freckle101 2 months ago
Kid's got skills,i got one of these and going from a 120sr to this.........good effort.
mCPx are nails to fly.
I read up as a beginner then bought one of these lol not my best idea.
SeshSoldier 3 months ago
@SeshSoldier
pj1980123 3 months ago
for a kid of that age to be flying an mcpx is pretty awsome........hats off to you both and keep up the good work :-)
carysjones123 2 months ago
@SeshSoldier Well no, if you are planning on getting into CP helis these things are great for beginners. I honlestly have to say going from Coax to CP is like learning all over again.
begley09 2 months ago
@SeshSoldier Steep learning curve!
roosterinorbit 2 months ago
Nice vid... this will be my next heli, thanx for the inpiration!!!
blaktreat94 3 months ago
Nice Vid!!! I know u said light gentle movements with the sticks...I have one & mine has a mind of it's own during take-offs any tips for takeoffs...mine seems to be tipping,either to the left /right or foward.....any advise would be greatly appreciated...I only have exp with coaxials..also,.did I jump to far ahead of myself with this Heli? Thanks -Rob
robbie2737 4 months ago
@robbie2737 ya no inputs on the right stick till your in the air
pj1980123 4 months ago
@pj1980123 Yeah that I know...but just found out the left servo never worked right outta the box....had to send back,waiting for return to get going ...thanks
robbie2737 3 months ago
@pj1980123 Thanks...I found out it had a bad servo outta the box
robbie2737 2 months ago
@pj1980123 Tried this "no imputs from right stick until in the air" idea after two weeks of flying virtually crashless and finally mastering turns. Thanks. You owe me a canopy support rod now.
ZeerosFate 1 month ago
@robbie2737 You should have gone to single rotor fixed pitch first. That is the next step after coaxial. Get a blade msr or msr 120. I havent tried the msr x but i heard that is even easier than the msrs. You should put the mcp x on the shelf for a while and master sr fixed pitch then go back to it.
CHoP69PeR 2 months ago
@CHoP69PeR Found out heli had a bad servo out of the box...In the meanwhile I bought the mSR plus a 120SR..no problems ..love it...now I'm back to the mCPX..no troubles at all after replacing servo..However,I'm still in the hovering stage..Thx again
robbie2737 2 months ago
Nice job indeed. I love me some grass to fly over. Natures crash absorber.
mrtberto 8 months ago
@mrtberto ya but he can slide along the pavement
pj1980123 8 months ago
Thats whats up!! Good job lil man
89lxman 8 months ago
@89lxman thank you
pj1980123 8 months ago
haha keep him at it! I bet he'll be awesome!
TheEiovas 9 months ago
Let him fly the 500!!!! Lol j/k
apodacainc 9 months ago
If he stays with it he's gunna be sick! Great Job though!!
Rfjelectric 9 months ago
lol, cute vid he is doing pretty good.
dannylightning 9 months ago