20 LPM hydrogen generator HHO management system

[mechamorafa]

What is the point of this?

[delvis11]

@mechamorafa let your imagination decide.

[mechamorafa]

@delvis11 My imagination is telling me that this machine is using a huge amount of energy to produce a small amount of an unstable (and dangerous) gas. An inefficient process that is known from ages ago.

Yes, must be fun to explode bubbles of hydrogen, but what is the "green" part of this process?

[ElectricEntertaiment]

@mechamorafa Blow it out your ass.

[iEugene1994]

Да , нихуевый .

[frank0067]

lORD gOD.. IVE BEEN LOOKING FOR A SIMPLE YET EFFECIENT HHO FOR 2 YEARS.. for my veicle but alll i see is people playing with stuff that wont translate into good MPG savings for their cars.. just 120 volts projects

[meesterJos]

Nice car in the background! HHO powered, I guess? LOL

[Wolfytototito]

only a single spark

[freedomdefender10]

Run the output to a natural gas generator - see if you can generate more power than the HH0 generator is consuming.

With 20 l.min you could easily run a 10KW generator that'\s 180l/hour.

I don;t see why you couldn't produce more energy if you ran the hh0 with special gas feed apparatus that you do not lose any hh0,.

[YeOldClipper]

Until we are all on the same page with the actual process we aren't going to be as exacting or defining as I am accustomed to being in my research scrutiny. What current science refers to as salt, I see as both compound and seperate elements recombining

[YeOldClipper]

I use the term COVALENT ZERO to describe the compounds seperating and recombining, releasing their heat energy electro-chemically, whether it be salts like Sodium and Chlorine becoming sodium chloride, Magnesium and Sulphur becoming magnesium sulphate, or hydrogen and oxygen becoming water.

[lastman010]

lastman010 i like your work ,,,,,good luck

[freedomdefender10]

I bet you have over unity there, you could easily run the generator running the hho off the production - just get it started with gas, and then switch it over.

[delvis11]

@freedomdefender10 its not overunity. not even close.

[b101aa2]

@delvis11 ya, agreed. not even close. but man is it a nice unit you built. good experiment for larger cells w/high voltage.

[adim0ck]

@delvis11

It is not iver unity, however, the great news here is that you can contribute massively to the efficiency of your generator by burning along with the gas. You may see at least a 50% increase in run time and have ample HHO to run a torch.

With sufficient pressure you could store in a metal hydride or palladium or the like and run your engine of choice from the stored H.

Be safe! Vent vent vent....

[delvis11]

@adim0ck never compress hho it can explode

[NBATIPS]

@adim0ck so that is 2600 watts right?

[Texmurphy51]

@freedomdefender10 How can you say its over unity just seeing it bubble into a bucket of water?

Why in the world would it be over unity?

Its just splitting water, no lab experiment has ever shown getting more energy from split water than it took to split it so why would this be any different?

[RavenPrecept]

@Texmurphy51 Cold Fusion

[Texmurphy51]

@RavenPrecept Non of the major labs in the world have been able to reproduce Cold Fusion.

Do you really think a guy in a garage can?

[matter45]

I can see your running that at about the same amount of power it takes to run an electric kettle. Which one would be faster to boil water, the HHO generator or a 2600w electric kettle?

[Hydrogenagent]

@freedomdefender10 you can start it with the hydrogen! lol... why use gas when hydrogen burns faster than gasoline.

[Marpacifico]

Hi. I do not understand why you use capacitor banks. Thanks.

[bondodan]

Have you found that the 3/64 gaskets work better than the 1/16 or 1/8 inch? I have started my build of a 101 plate unit. 7 1/2 x 7 1/2 22ga SS with gaskets I will have a 6 x 6 exposed surface area. I plan on using an inverter for the power supply. As I understand it I should have 2 - 2.5 V per cell. Any suggestions for numbers to shoot for?

Thanks,

Dan

[delvis11]

@bondodan shoot for 1.95 to 2v per gap. I suggest using 1/8 gaskets and use large ports like about 5/8" to 3/4. Coat the holes with weld-on 16 It will cut down on current leakage a little. It's going to take a lot of electrolyte but It will run cooler and be more efficient. Would you mind posting a video or sending me something? Good luck!

[bondodan]

NIce unit! What size are your plates, how many and how thick are your gaskets?

[delvis11]

@bondodan 118 9x9 plates with 3/64 gasket

[losttreasurehunt]

Hook it up to a small motor

[jeracojay]

great work it looks like a lot of production there.

[MrFishfulThinking]

@katanaguy100 i have been researching HHO gas and making and improving HHO Generator designs for over a year now and i can tell you you need ALOT more gas than 2.5litres/min to actually RUN a car on. the optimal amount to put in your car engine before you have to tune your engine for hydrogen is roughly the size engine you have in CC. eg, a 2500cc engine = 2.5l = optimal amount which is 2.5l. hope this makes sense:)

[Tinkerdamit]

Hey guys, fantastic results!!!! I hope you will continue to share, what you have done is way above my dabelings in it. Just a little more and you will be able to run what ever you want ( engine size ). I also hope you give it away.......Sounds bad as you all need to be reqognized and in truth compensated for your endevours.

But I would also like to see this type of info free mankind and not be loked away as so many have been before you. Thanks , it trueley is insperational .

[jackffarrell]

Very good, but there are those producing over 55 LPM, and running big cars exclusively on HHO.

[delvis11]

@jackffarrell PROVE IT!

[jackffarrell]

@delvis11 Just saying, dude. your work is good, just not the best. And, I don't need to prove it. We're doing' it. But, you seem to be too self-impressed to look around. So, have a good life.

[delvis11]

@jackffarrell always talk and know action. If you cant prove it it never happened. Don't get upset just throw us a link so we can see.

[jackffarrell]

@delvis11 Go check it out yourself. Here is your first clue. Just do a little YouTube search for "Dodge Pickup Burns 100% Water as Fuel!" Now you have a link, big mouth. But, these guys aren't the only ones by a long shot, little boy. Grow up. You just ain't the smartest guy on the block. If you were smart enough to do basic research, you would find people all around the world doing that and better.

[delvis11]

@jackffarrell Freddy is intriguing but still it has been all talk from the start. I post these video's up here to help people and all I ask for is honesty out of people. Lets just keep it real and share information. One of the cool things about running this channel is the "block user" button. Like I said don't get upset, keep your cool and don't get blocked.

[jackffarrell]

@delvis11 Like I first mentioned, your work is "very good". And, instead of us jabbing at each other, lets hope that very soon we can all start using HHO for a number of things, from powering our vehicles, heating/cooling our homes and other buildings, creating electrical power. I believe that you and I each want to see us all out from under the thumb of Big Oil Monopoly. So, I do applaud your work. Obviously, you have invest much time and effort. Big thumbs up to you!

[mcmukmob]

@delvis11 Good reply to Delvis mate, he is guilty of what he judges others. (smart ass! with no honest back bone) Great work on the generator. But if your feeding it 10amp at 250V that is a lot of input to get 20 LPM. Have you come up with any concrete evidence of Stans electronic suporting circuits, to drop yr V/A ratio and maintain the LPM?

[mattdidit84]

@jackffarrell Freddy is all talk. No proof to date of the truck actually running on HHO. In fact in the video around 5 minute mark the valve that runs to the engine is in the OFF position! Looks like crap. However this guy has some measurable results. This is how we start. From here we test and grow.

[CLICKHERE2006]

@jackffarrell

Dude your a DICK ! if you got something better then how easy would it be to copy a link in the comment so back up what your saying ?? insted of every one just thinking your a looser witch judging by your stupid comment im gessing you are



[MrFrewilly]

hey nice work , im looking to biuld one for my van and all research i do say to use stainless steel can another type be usedand since i live in canada what would be good to keep it from freezing

[delvis11]

@MrFrewilly stainless is the least expensive and most commonly used metal to build these. Nickel is a far better material but is vary expensive.

A 18+% KOH electrolyte concentration will keep your gen from freezing but it is dangerous to use at the level.

[FreeEnergyNow1]

scam! A waste of energy do nothing.

[WindPowerKits]

like the clip. check out my home energy stuff using Rooftop Wind Turbines and solar panels on my roof. I just won a Green Design Contest with my product on EarthDay. Friends and Subscribers Welcome.

Thanks, Sam

[VeeFTeeS]

You are animal!!!!!!!! :-D Great job mate!

[MrFishfulThinking]

Wow this looks to be the most efficient model ive seen so far. even though it draws 10A, you should hook this up to your cars intake, if it really is producing 20lpm you will b0e able to easily run your car. do you have the design plans for these by anychace?

[delvis11]

@MrFishfulThinking I wont quite run a car and takes too much power to run on a normal car alternator. The plans are in my head but I have made several video's explaining how to build one of these.

[Realmac341]

@delvis11 how much voltage are you using? i think you are using AC trougth your dry cell,i see surge capacitors in the back. i would like to see some gas burning example coming fron the hho bubbler that it'll be nice

[TheHortond]

@delvis11 You should be able to with a car running on a 60 amp+ alternator.

[mcmukmob]

@MrFishfulThinking How can he get 250V at 10 amp out of a car alternator/battery with out massively loading up the motor / fuel economy?? I think it is a good bench project for filling balloons. I think Stan Meyers got it right electronically and atomically, but I Have yet to see it replicated. (sorry for the poor spelling)

[bogartbcd]

Producing HHO? The demo is not clear  if the gas coming out (bubbles) is Oxygen or Hydrogen? there is no separator that signifies Hydrogen or Oxygen... all we can see in the demo are bubbles from the two gases(mixed). Terribly confusing...and the demo seen above is so vague. Why not try left side black cylinder powered by negative soure with independent gas outlet ... this way we will know the negative line is for Hydrogen whilst positive line is for Oxygen. Isn't it Scientific???

[delvis11]

@bogartbcd No it's not scientific It's just a simple demo and in a series of other videos. Everything I do is with hydroxy, HHO. The gases are mixed. Watch some of my others video's and you will understand whats going on. Thanks for viewing.

[345greg]

I hope this guy has got good insurance? At this rate he is going to have no roof on his garage when the HHO finds a ignition source!

[bogartbcd]

@345greg Maybe he doesn't know what he is producing with...both gases are very volatile & highly flammable... and a little spark from electrical switches would create a massive explosion. tsk tsk....health and safety wise.... hope he understand this!

[pono1951]

It's my understanding, that HHO is (browns gas) and is used in cutting torches,

and can cut though some really hard elements,

I would like to use the hydrogen for burner fuel to heat water for a steam engine.

Is that possiabe with out mealting my boiler?????

[delvis11]

@pono1951 yes HHO is browns gas. It can be used for heating but you will need a custom heat exchanger. You are right the HHO will melt your boiler if it comes in direct contact with the flame.

[pono1951]

would a smaller unit that only produced 10 LPM use 1/2 the volts&amps.

or 5LPM 1/2 of that, I would like to produce around the 5LPM area and want to know approx.what the power usage would be?

[delvis11]

@pono1951 Your looking at 210 watts per liter of hydroxy

[oseloth]

How much power is that in watts per hour? 

[OverTaxed42Long]

you're running DC 260v at 10A ? What is your power source? And one other thing I can't figure out is how anyone is able to push the gas out of the apparatus. See the molecules that make up water are H2O and seperated into the atoms are HHO. The atoms don't change their size when the H2O is seperated into individual atoms of HHO so there is no expansion. What are you using to create the bubbles? A fish pump? What? Is the gas coming out actually HHO or just air?

[delvis11]

@OverTaxed42Long This project is being powered by a 8000 watt genset. when the water decomposes into its elements it is a gas. this gas is boyant and lighter than water. this makes it rise. That create an out pressure that carries it and the water out of the generator to the tanks. This action also creates a back pressure at the inlet ports that sucks water in from the reservoir. Thus creating a natural circulation. Yes hydroxy is coming out.

[oseloth]

@OverTaxed42Long

With electrolysis of water you get two gases > 2 H2O(l) → 2 H2(g) + O2(g) when gas is in small container the pressure builds and by deference of pressures in side and outside of cell you get the gas flow. Pure elementary school material.

[orioncheung]

I'm confuse.. what is this for by the way??..

[CorruptCom]

I was going to ask a question but Pono1951 beat me to it.

Also you gave a believable answer so all thats left to say it looks neat.

I could ask what are the caps doing that makes them necessary?

Have you tried the system with unfiltered current?

[robbosdog]

Man love thoes caps !!

Great stuff delvis 

[Givy55]

You should try to hook that baby up through a rodin coil... They turn 1amp into 200 amps... Check it out... Just search rodin coil on youtube... Nice rig btw...

[oseloth]

@Givy55 You lover the voltage if you increase amperage. You need both of them hi in this case.

[pono1951]

what do you feel that you can run on 20 lpm that makes it cost effective to spend approx. 3,200 watts of power to produce

[delvis11]

@pono1951 not a damn thing. I did it for fun!

[jimmyhackers]

@pono1951 oxyaceltelene cost a lot we get through the laregest set of bottles a month minimum. that 600 pounds a van a month and we have 4 of them. we pipe up supermarket a/c and fridges/freezers

hho welders do the same job and you put cheap water in and not expensive gas. it give a cleaner braze

on site usually you dont pay for electricty, so theres the beneifit

[delvis11]

@jimmyhackers That is a economical real world use for hydroxy

[pono1951]

H, I like your video,very impressive amt. of hho on 268 watts DC.basicly 3- 100 watt solar panels right? I would like to build one/buy one do you have plans and parts list inc. suppliers? but first a question or two... how long can you run this system 24/7?

and how water do you need to keep refilling and how often??? whats would be the maintinance problems?? is the $1,700 inc. power conversion?? if I start off DC. (solar panels) does that reduce any cost on your system???

[oulikethat]

how much for one like this.

[delvis11]

@oulikethat It cost me about $1700 in parts.

[shon416]

@delvis11

Hi delvis !

Is work on car just this whitout gasolina??

Is enough for oane car whith engine 1.3 liters 73 HP ??

I d ont have ideea about consum HHO for one engine !!

I d ont find date for this !

If you can help me please !!

[oseloth]

@shon416 You can only help improve combustion of gasoline. Give it 30% more combustion so you have more power with less fuel. But you can't drive purely on H2 if you don't have h2 containers with you. Neither I think your car can produce so much electric power.

[terrymccurter]

Im courious what part the capictors play in your system. I see your converting the ac to dc but for capictors to work right they must charge and discharge. Are you useing a PWM with this large unit or just running it full speed ahead. Great production for such low amprage only 2630 watt unit. Great videos Steve.  What did scarecrow think of your cell ? Putting in another positive and neg plate will probably get you more LPM but your amps will go up considerably . cant wait for next video

[advancedhydrogen]

nice dude.. thats alot of work to put a cell like that together! good job!!

[delvis11]

@advancedhydrogen I have thought of a way to push it to 30 lpm. I will be dusting it off in a couple of weeks and hopefully make some more video's

[jimmyhackers]

@delvis11 hey i need about 30lpm. can you give me a good site for your cells please i can source eveything else i need, ooh actually maybe where you get teh resovoirs form aswell

[BeetleJuice1980]

amazing job !

please can you explain to me why the inner plates do not need to be wired?

i cant get it

i see the wires on the sides but that is only for 2 plates.the others how do they get voltage?

thank you

keep up!

[dahduke]

this would make an awesome torch, really nice work

[delvis11]

@dahduke thank you

[rudy6876]

Can you explain how you are reading DC current with an AC clamp on meter? 263VDC and 10 AMPS AC on your reactor????? Is that an air pump I hear in the back ground???????

[delvis11]

@rudy6876 It's a dc clamp meter. and no thats a 8000 watt gas generator you are hearing.

I'm reading dc

[MegaBubba1954]

glad to see this thing up and going. i think i need mabey 4 of these units for my shrimp boat......1150 cummins........ might be eneough for my needs.

[bigqman123]

hey delvis, can you make me one of these? i have a 15 litre cummings diesel engine @ 515 hp if your ever in ann arbor michigan we can test your hho unit on a old truck i got 97 freightliner with 1.2 million miles to do a real world mpg test.

[delvis11]

@bigqman123 I wish you were here in utah. I have a semi unit that I would love to get on a truck like yours. Problem is I need the truck here to do the tests.

[bigqman123]

@delvis11 utah, salt lake? sometimes i haul loads for c.r.england their in salt lake i'll be there in the first week of may

[hogbarok]

Impressive production. Will you have a schematic available?

[IDIMAN1988]

@delvis11

I live in utah i got a rig you can test on.

[PappyDan]

setting it on fire would have been great, then we could see it burn as it was made.

[kdkinen]

W O W best production i've ever seen

[onecraftydude]

Nice setup.

Are you working on heating units with your cell or some other application? I had to use heat sinks on my rectifiers.

I would be very interested in the fuel you are using in the water. Is the fuel replacing electrolyte or just enhancing it by breaking down the surface tension?

[delvis11]

Im going to get this system back out this spring and run some tests with the new fuel. If i can get this efficient enough maybe I will build some kind of heating unit out of it.

[Phantasmansghost409]

I got to start making one of these for my little idea. The hard part is getting the plates and doing the machine work.

My main concern is safety. Thinking of titaineum and using pulse tech.

[juggernautxtr]

very nice, could store that and run a car.

[becoming29]

Is running this unit at 260V kind of counter-productive in the sense that you are using so much power to create that amount of HHO? Looks awesome, but what could use that kind of Hydrogen to make it worth using that much power?

[delvis11]

These test were merely a stepping stone in the development. I am now working with a very cheap fuel added to the water that brings the overall efficiency well over 100%

[ferraridriver16]

now i'm really really interested. Am i allowed to know what kind of "cheap fuel" you're talking about?

[delvis11]

At this time im not giving out the information. I need to be accurate about my findings and claims before I tell anyone.

[pilotpa28]

Great Vid

[ferraridriver16]

delvis11- i have a challenge for you. What if you stepped down your voltage (took away one row of capacitors) to keep it around 120 volts input to your dry cell. Then, buy or create a power inverter that is capable of taking the required 120v for HHO production from a single 12 volt car battery, while keeping the amperage at or near 10 amps. Then run this back into your system to see how much HHO gas can be produced. This may be something interesting to try in your next video.

[pilotpa28]

Surely it is proportional to cuurent half the voltage double the amps. It very much like ohms law I=VoverR as the resistance is constant then the only thing to reduce the current would be to increase the amps hence why at 240 V only 10 amps was drawn. I think!

[delvis11]

This type of power consumption would drain a car battery In a matter of a couple of minutes. A car alternator for the most part could not keep up.

[DevastatingStorm]

amazing.....

[graceoverall]

lol... that's amazing. Now shrink it so it will fit under the hood of a car, haha.

Great work man! Outstanding!

[overunitydotcom]

Great production at 2600 Watts input.

Are you going to try to power your generator with the HHO gas next ?

Please keep on working on it.

Maybe you will get a closed loop system running ?

Good luck.

Regards, Stefan.

[delvis11]

"closed loop system" is impossible and and against the laws of thermodynamics. That will never happen. at best this cell was only 58% efficient

[eleftheros2009]

more it s not the best. 1Ltr?min it s ok for every car engine up to 2Ltr

[overunitydotcom]

Well, Walter Hofman alread has a closed loop system. The trick is the HHO gas is very explosive and if you modify an alternator in the spark plug timing then you can get much more mechanical power out of an homepower generator. You also must avoid the waste spark.

Regards, Stefan.

[waterwart]

@overunitydotcom where can I find some information on Walter Hofman?

[Phantasmansghost409]

My thought on that is taking an old mag fired engine and set it up with pulse injection and ignition to be sure the valve is closed before combustion. Then getting a belt drive or direct couple gen to it for home porwer. Once running use some of the power to keep the hho maker running. It could still use gas and then switch to hho operation. Just would take some good knowlage of electronics to make it work.

[intj123]

that is heavy duty, wish I had that beast

[moonielo]

have you tried the cell configure from left to mid all negatives and the mid to right all positives? how well does that do, has anyone else tried it?

[RebelRouserTexas]

add a flow pump to your system and you might get 30LPM. I'm getting 20 LPM at 20A with 120VDC and a flow pump.

[argosy2006]

its a hell of a Jacuzzi you built there

[HHOhybridBuilder]

Very good HHO production.The best so far I've ever seen.

[Anothercoilgun]

I was looking for some high production models. I look no more.

[Anothercoilgun]

Beautiful.

[alaakousername]

wow thats great man,...............

[jhwtech]

Nice job, good to see you made your goal.

So how much amperage do you need from an alternator to get that kind of voltage and what do you use to change the amps to volts?

I was also wondering what your volts and amps evened out at, and what the highest water temperature was.

How long did you ran your system before checking?

Hope you can answer a few of these questions.

It looks like a great generator system.

Thank,

[altern8energy]

the rectifiers would run cooler if you mounted them on heatsinks. 180 degrees is pretty hot. mounting them on heat sinks with a fan would greatly reduce the heat and prevent thermal breakdown of the bridge rectifiers.

[altern8energy]

pretty much created a Brown's Gas cutting machine without the pretty exterior case. They also run on 240VDC. They also sell for about $6000 or more. I'm curious what production would be if you used way bigger plates in a 60-65 plate system, using 120VDC instead?? Say like 36" tall and 6-8" wide plates. I keep thinking the more surface area you have, the more gas production. Too bad I'm unemployed and don't have the money to purchase the materials, else I'd be building myself.

[RisingSun350]

WOW!!!!!!!!!!!!! insane!

[raulvideo]

Dalvis 11

Now be cos is 220V and capacitors the electricity flow more fast so if you conect another generator on series you goin to have doble output we

[raulvideo]

the same amps, and if you put a vacuum pump to a 20 gallon tank to full vacuum in a car no air, you have a car ruining 100% HHO no Heat standard HP, sirlanka and Daniel Dingles secret, Stanley Mayer is other stuff but I like your Generator.

Dalvis this is for real and sorry for my English

you can sell this generator for more 1,500 on eBay

[bmeade8]

Good work looks clean and simple. I think your doing a great job. I would like to see the hho Group to start to switch its focus to uses for everyday life. this is where the the real benefits will be shown. Ok now you have 21 litters, Now show us what you can do with it. I want to see uses other than cars and welders. Some show run time tests on gens, waist of time. show us uses for cooking or Hot water heaters or something with comparisons costs to hho, elect and gas. real everyday life stuff.

[bowdanman]

Nice setup!!! Will you be selling the electronics, rectifiers and cap setup on your website?

Thanks

[GoGreenHHOhybrid]

HOLY COW!!!!! 10 stars**********

Very NICE....

[RVhydrogen]

WOW that is cooooool !

[water2gashawaii]

use a 2 liter bottle to measure the time it should help with the accuracy.

[sirHOAX]

Pretty sure you could get an alternator to output that power for that HHO-Cell in a car. Even more if need be. Something in the range of 500V@30AMP could have dual units like that? Not sure but its possible.

Really nice build - very exciting to be witnessing something like this take place. Because in the back of my head I could see something like this giving my little 4cylinder a huge boost in MPG. Keep up the excellent work, great craftsmanship to boot!

+5 Nice Work.. Regards, --S--

[tjgame2]

Dam dude.

[tonirojas]

Que barvaridad por DIOS! Is an incredible producer but, i have a question: What functionality it has? because it´s too hho, don´t you? for a car or any vehicle i think.

Where can i use this "HHO Monster"?

Please solve my doubts

[SmartScarecrow]

outstanding ...

[ehnriko]

Wait a minute... Is that a Chevy Nova at the back? with Cragar Wheels that I see behind your monster cell??? or is it a MOPAR??? Would be more cooler to see that for your hho project.. :-D

[delvis11]

it is a 1970 ford mustang that i have been working on for the past 2 years. I have a really sweet engine for it.

[ehnriko]

How could I mistake a Ford for a Chevy or a Mopar???... ok, I never had a stang... the 70's type are the big ones... like the Mach 1.... nice roadster nevertheless... Will you put that Monster Cell on this car?... :-)

[ehnriko]

Can I call that the TWIN TOWERS of POWER! :-D

[HHO4ALL]

WOW

[altern8energy]

fill some 16" or larger balloons with that stuff and tape some slow burning fuses to them and release them for July 4th... BOOM!!! cheaper than fireworks..  100+ plates with 265VDC is nice, but a little unpractical. Unless you plan on running that generator on 100% HHO.

[delvis11]

I will have to give that a try. You know making dry ice bombs is a felony now. Would a hydrogen bomb fall into the same category :)

[altern8energy]

it's been reported that protesters of the U.S. Government are classified as low-level terrorists.. I say f**k them!! fill a tanker truck with compressed HHO and use a spark plug as the fuse. I imagine the shockwave would be quite impressive..

[noelsingletary]

DUDE!!! Don't you know even suggesting such a thing will have them knocking at your door when something like that happens? You should have Delvis11 remove your comment to protect yourself.

[jdcmusicman]

now that's some good gas flow ....

Nice looking setup man