SMD CC-1 Crossover Calibrator Multiple Amplifier Gain Matching Device

[splaudio1]

im glad i was able to grab the both of them that will make my amp uning way easier than by ear :)

[BassPounderX]

damn thoes amp put out alot pf power

[tennesseebassin]

maybe im blind but those crunch amps were beatin the hell out of those SMDs LOL

[soundsystemfanatic]

if the contest is still on i found crunch amp 1 at 3:04 on b-legit chicken hill studio

[dittomarmoset]

I just received both units, and they are super easy to use. I used to use an o-scope and a multimeter to do in 20 minutes what these things do in 2. Unbelievably easy. This is a fantastic product Steve!

[mystiqueman366]

how did you tune your tahoe before the dd1 and cc1 existed?

[blueelmo24]

how do i strap 2 rockford t2500 to 4 subs

[fakebro]

Noob question...but is the level knob gain?

[pspfattuner]

do you want to give me one SMD subwoofer? I'll pay the shipping to germany :D

(just kidding, I love this suboofer ;) )

[jonniemexico]

Is it necessary to gain match when using 4 amps in a master/slave configuration?

[psluver]

So shouldn't you clamp to see which 1 is putting out the least power, then calibrate all the other amps to that lowest 1? Wouldn't that guarantee zero distortion? As opposed to just picking a random amp to calibrate all the others too?

[fyerbyrd22]

did u just eyeball the one with the highest spot on the gain or did u clamp each one to see which put out the least power?

[lownloud87]

are you going to be coming out with a carrying case for the dd-1 and cc-1? just wandering because im using a carry case that i got with my o-scope to hhouse the dd-1. if you are planning on making a case lemme know and ill buy one

[mystiqueman366]

I run a 1200w 4-ch crunch in my car, and it gets the job done pretty good for how cheap it was :D

[Sosay412]

I have the DD-1, would this CC-1 product be beneficial to me since i do not have a subwoofer and only 1 amp running in full range mode for all my speakers? If so how would i know what frequencies to set?

[fingerboy18]

You said that you developed these products with a few friends? Are any of you electrical engineers? Good thinking, this is a cool product.

[Bunkers101]

It doesnt hurt to play them without a box? I wouldn't know.

[justinbonytube]

@Bunkers101 no its called free airing

[lilsolo1992]

how much would it coast to get 2 18 inch subs from u

[caraudioman16]

@lilsolo1992 each AA/SMD sub-woofer is about $1,000 each.

[NoSpace4Bass]

3:18 GHOST DOG

[djtitanik]

I Like Dat Were Did Them Test Tones Come from...

[basshead216]

Test some sundown amps ha

[travislttl7]

I agree with the man behind the camera at 5:05

[pimpenfresh9]

annotation at 2:06

[xNickerishx]

how did you come up that product

[456japs]

how did the 4 500 watts crunch amps power 3500 watts smd subwoofer??

[calvinblinkee]

@456japs You don't need to match the wattage to power them LOl

[bjizl]

When will these be available?

[MasterPiMp420]

That is the Best product i have seen for car audio, yet. you are a pioneer and genius

[OVERCAPITALIZE]

So... Did steve himself made the CC-1 and DD-1?

[calvinblinkee]

@OVERCAPITALIZE no

[manueljrmelendez]

where do you get your power source from for those amps in the work place?? sick ass vids think ima have to grab up one of those cc-1

[jony8126]

muy interesante pero para los que no entendemos ingles es dificil saber lo que hacen con esos aparatos si entendi que es para regular el crossover y la distorcion pero es todo lo que entendi

[aulvalenzuela21]

@jony8126 aparte de eso, es para arregular todos los amplis, y toquen al mismo nivel de potencia, y frecuencia. asi las bobinas estan agarrando misma senial, ah niveles similares :)

[07tsala]

No joke, you and your partners are unreal! That is so awesome! I am definitely getting both of those! I always would wonder when their would be tools like this to do just that...now after following you for years...YOU'RE MAKING THEM! lol Your channel is by far my favorite subscription on Youtube!

[hemiinmytruck]

I have that headunit in my truck :D

[NiteRyda88]

i got the DD-1 and love it, i use the amps to check the headunit though, some head units dont put out enough power through the rca for signal lol, but thats the head units problem, i definitely want this new CC-1, i may not use it all the time, but well worth the money when i do need it :), ur a great guy Meade

[Graphicspittz187]

SO SICK!

[ChevyGangman323]

Hey steave I have a question I have a kenwood kdc 248u headunit and I want to add a clarion eq a monoblock anp and a 4 channel amp and a audiocontrol epicenter but idont know how to get remote signal to turn the eq,amps,and epicenter on wen the headunit turns on what can I do I'm going to do this in my 1999 chevy sauburban please help me

[NiteRyda88]

@ChevyGangman323 does the radio not have an ext amp turn on wire?, if it doesnt then check the interior fuse box panel to c which fuse is the "radio" fuse, i have always seen it as a 10amp fuse, dont run all the remote turn ons off of that 1 fuse, u will be sure to blow it, but use a nice wire, i use a 16ga wire, then use a 5 prong relay, run a "+" and "-" wire to the relay from the battery, then from the radio fuse to the relay, then from the relay to all the gadgets u want to turn on with ACC

[ChevyGangman323]

@NiteRyda88 can you please make me a tutorial video of how to do it please

[NiteRyda88]

@ChevyGangman323 i will have to search around for a relay, i dont think i have the exact relay u need, but i could draw a picture of a relay for worst case, but i will do it tomorrow (saturday) for u

[ChevyGangman323]

@NiteRyda88 thanks bro i apreciate it sick sound you got there i suscribed

[NiteRyda88]

@ChevyGangman323 no problem, i like to help, i sent u a long detailed message as well, so u got my directions, plus i will still make a video, theres no such thing as too much learning lol, im a visual learner myself, but some people understand just as easily by reading something

[ChevyGangman323]

thanks bro i apreciate it i suscribed

[brutisking]

LOVE THEM SMD'S!

YEE!

[ERICROCKS95]

are those duel coil subs?

[xzibit290105]

I love outtakes! Please do more of it! Who of the same opinion is thumbs up!

[crazymaster]

soo were did the dog come from a 7:50

[Nters715]

cant wait to get my hands on one! when are they coming out?

[the666bud]

how much $ for it and when can i get one

[pmgelectronics]

hi, steve i have 2 rockford fosgate rf series amplifiers 1 amp is set as slave and the other amp is set to master how do i set the gains with this type of setup and can i put the ground probe to the dd-1 anywhere or does it have to be grounded only to the amp that your testing.

[ElijahJordan22]

Hey steve how much is it?

[Toad559]

so with the cc1 after the dd1, did either of the amps gain incresased or degreased from what the dd1 read? if it increased a lil to match the calibration of the master, would that leave it a slight distortion? should still be fine correct?

[meade916]

@Toad559 when the DD-1 is used FIRST, all the amps are VERY VERY close. The CC-1 just fine tunes them. I litterally BARELY BARELY moved each gain.

[27plebe]

Tight hahaha so what happens at the end??

[caraudioman16]

Did he fart or what?

[grecords88]

Ha he finally dropped that F bomb

[ansonx10]

@grecords88 Not exactly true. He's said mo-fo many times.

[Russospeed]

Hi Steve!

gauge how much a crossover? and where I can get? I'm from mexico

[Russospeed]

Hola steve!!

cuanto cuesta un calibrador de crossover? y donde lo puedo conseguir? yo soy de mexico

[ryderonthestormx3]

Damn thats an awesome product! Cant wait to get ahold of one of those.

[MTXAUDIO5132]

Hey bro ive been watchin your videos for a while and finally made it to cali ill be in san jose/sf bay area...if your out that way do you think i can get a demo of the tahoe or at least shoot me a message on how to order an smd 18 when i get back to michigan

[AG01KGS]

The dog looks sad. :( Anyway...nice video!!

[MoneyPrinter204]

wow

[tapaudiop3]

what happened at the end that your friends did i dont get it

[BassDemon420]

@tapaudiop3 farted...

[BFLY3]

@tapaudiop3 his friend rips a fart

[Tremendousthrob]

BIGGIE>PAC

[winder808]

@RonGotti2 Marked his territory ☺

[bradlycriswell1990]

Long time fan, means alot :)

you my man, are the man of all man's.

i dont have a man cave i have a SMD cave.

i dont have a system

i got a steveisytem!

you're changing the world !

[bwl61]

yo i know what d smd products im gettin for christmas the CC-1 and the DD-1 thanks meade!!!

[dcorona1592]

Yo meade whats up with the shop pony??? That thing looked dope!

[vito2188]

thats a great amp i got two of them

[HELLO9562]

Hey meade are you able to use the dd-1 to set gains on a pro audio amp like the ones for your tower speakers? if so can you do a video on it. Thanks josh

[MichaelFrosttail]

What kind of power supply do you use for tests like these? Your drawing a lot of amps so im curious how you dont blow circuits.

[kg3rd78]

You did it again. This is exactly what I need. I have a fi q 15 running on two fosgate prime 500.1s. Money's kinda tight right now. So I gotta wait till income tax season. :(

[Mr21ghostman]

AND ALMOST FORGOT THE PRODUCT THAT U HAVE IS SOMETHING THAT I WAS WAITING ON FOR SOMEONE TO BRING OUT. AND MAN THAT PRODUCT U HAVE IS FANTASTIC. QUESTION! CAN U SET GAINS ON A AMP IF THE AMP IS NOT RUN THROUGH DECK BUT THROUGH A CROSSOVER OR A Line DRIVERS?

[hondannyboy]

Another must have tool for every good installer out there. You and the guys of D'amore Engineering are geniuses.

[spiethers85]

amazing products to improve your system!!! shits so sweet!!!!

[leedonahue88]

smart business move. did dd-1 sales power the cc-1 design?

[niggachino]

@airjordanking23x are your door speakers amplified if so you can do it by setting your crossover

[QWILDER]

WONDERFUL!!!! 

[Bryanx89]

awesome man, cant wait to see what other sweet tools you guys think up

[TheKwesi23]

i'm lookin forward to seein a combination into 1

[AlpineAudioNC]

Dude these two tools are friggin amazing, way accurate! I need the finances to buy em but my god i gotta have em both! Steve, amazing products man!

[Razze1699]

how much is it

[813pappo]

Nice !!! Finally got something to tune my amps right!!

[SinBeatz1]

Great job Steve awesome product...!

[AiRjorDaNkInG23x]

someone please help; i gott 2 rockford 6 1/2 door speakers, 6 rockford 6x9 an 2 12 inch jl audio subs with alpine 650 amp, with a sony hd radio . now the door speakers can not support bass how can i make the door speakers not put out any bass?! cause it doesnt sound good.. now

[SPLfreak18]

bloopers at the end would make each video even better lol.

[SPerezTech]

I LOVE YOU STEVE!! AND I LOVE SMD!!

[Chris090883]

Hey Steve can you do a video on how to install 2 head unit's in one car I've always liked the look of it and was wondering how it was done

[raidercann1]

some cheap amps swampin some smd subs bad ass

[agentindy]

Thanks for the video, and good luck :)

[920gamez]

LIKE a boss

[CentralCoastMadness]

Damn this a sweet product! the goatee is getting huge. you and chicken should should do another vid together see who gets more flex out of their goatee. LOL.

[TheOfficialDecaf]

great product

[UnderLoK]

How old is you dog man? Looks like an old timer ;)

[SuperFluffyfluff]

Amazing, I need both now.... Christmas gift for an og reo member? Lol (fluffy)

[latexx88]

U are a F..... Genius!!!

[meade916]

@latexx88 im nothing without my partners at D'amore engineering....but thanks !!!

[afrozilla71]

@meade916 HOW DO WE WIN THESE AMPS AGAIN BRO

[bradlycriswell1990]

@meade916 that shit is STEVEN!

thats what i say to my friends when im flexin!

[Mr21ghostman]

hey meade whose f-150 dose belong to.

[meade916]

@Mr21ghostman thats my boy Joey's - he is parking it there for a few while he settles some personal issues.

[Mr21ghostman]

@meade916

Ok cool. Man ur subs are sick especially how there are built. Are your subs peak output 5000watts or 4500watts? Because if I ever buy them I wouldn't want to put the wrong amp on them and blow them. I would be very mad if that happens on a stupid mistake on my part.

[haddrifterz]

@meade916 his truck must be up for repo if he parking it there for a few lol

[meade916]

@haddrifterz ya bro, by the WIFE haha......no im just playin. Its an older truck LONG paid off.

[1234Aldi1234]

nice tool

[aerovias1234]

LOLOLOLOL at the end

[darus627]

very nice vid. Give more. we love watching your videos. :)

[meade916]

@darus627 thanks man, i will! :)

[Mr21ghostman]

@meade916

And your forum is very nice and educational.

[gfhnk]

Those amps can push nice...with SMD tweekin it ugh.

[multiBassmansam]

would give up alot of things to have a job like you

[MrPep469]

Is there possibly a very awesome carrying case in the works for this lovely pair of beauties :)

[MrKdub318]

in my opinion, the DD-1 and this new CC-1, are the best two products to buy, that the average bass head can buy and have professional quality products, and also professional results. you could have chosen to make a new design of a t-shirt or hat, but chose this. if i had the money, i would be buying both. maybe you can sell both the DD1 and the CC1 as a combo pack or something (hint hint) haha. anyways, good work steve

[VersusModeADR]

How long you have had that Pitt?

[ChevyRida2007]

gotta get me more hrs at work.... I need a DD-1 & a CC-1! I dont want nothin but clean power!!!!!

[928bige]

Hey wus up Steve, would you set the hz on the amp according to the box tuning? like if my box is tuned to 33hz i would set the Hz gain on the amp to 33?

[berlow7]

@928bige subsonic

[julsricky]

the dog!!..:DD!



[fredtflail]

I like the box full of goodies.

[RickAt19348]

Very Nice. i hope you plan to release a CC-1 + DD-1 all in one sometime in the future,(yes, in the future, calm down in advance) The CCDD-1. That would be TOO Fucking Badass.

Giving away 3 500 watt amps!?! Good shit doing something for your subscribers Steve.

[caraudioman16]

I am going to be one of your first several customers to buy this one too!

[1boostup]

I need one of those for sure !!

[psluver]

I feel sorry for those beautiful subs. They are starving for MORE power! Nice product steve! I want both of your awesome tools!

[Marcus10Hanna]

Im know im gettn one

[brianboyer82]

Cant wait to get my hands on one of them

[DraGunred]

like I said last time millionaire, keep doing whatcha doing.

[GordondaisyHC]

Everything is wired in Parallel right?

[xChikox]

Incredible product man! Could I purchase the DD-1 and the CC-1 if I live in canada?

[supremeaudio13]

Wow, those Crunch amps made that sub jump a lot more than I expected lol... even tho it was free-air.

[elited5]

another industry changing tool.saving up to get them both next year.awesome!!!

[mrchrisk36]

This is to cool!! Now I have two tools that I gotz to have!!

[matrixownz]

This is what the car audio world has been needing for a long time easy to use and user friendly mad props on that bro

[DeafeningSounds]

I use a crunch amp for my mids and highs p1800.4  i think .. Good to know they take a little beating..

[AlanHurtado480]

DUDE I SWARE THIS IS WHAT IVE BEEN WANTING MY WHOLE LIFE! I SERIOUSLY CANT BELIEVE YOU MADE THESE YOUR A GENIUS!

[pimpablo]

Thanks for all the videos Steve!

I have a quick question.

What headunit are you using with this setup?

I am sure its a Kenwood but what model number?

Thanks!

[BassHead3937]

@pimpablo

Kenwood KDC-248U

[ph1ldav1sFROSTED]

Whats going on with that F150 in your garage?

[caraudioman16]

I will buy one the day it's released!

[simonson593]

Boss dog guards the haters from the Lexus ISF

[xXimmortalxSe7eN]

Soon are we gonna see a crossbreed of the DD-1 and the CC-1 in one device? ;)

[HitemWithTheFlex]

@xXimmortalxSe7eN thats what i want, i already have my dd1 though, YEEEE!

[cabriolet2007]

yayyyyyyyyy finally, great job

[calvinblinkee]

Are the internals of this crossover calibrator completely different from the Helix Digital Crossover you used?

[demonsparkx]

lmao i JUST baught a powerzone p1100.2 crunch is beasty for the price. glad to see you still can appricate the cheaper shit! keep bangin meade.

[theycallmejtizle]

very very impressive Steve..another great tool soon to come out and will deff benifit everyone who has multiple amp set ups..great work man

[proskater898]

Yet another great product

Thanks Steve !

[small2cats482]

Quite good flex for 500 watt amps, I hope to get them in your giveaway :D

[KUETE187]

SMD'S DO Want!

[Fatboy28206]

Just to know you have made diy guy alot easier for installing car audio thanks

[ATVMan24]

Hell ya this is cool. I just got a DD-1 and it was so easy to use but I didn't know where to set my crossover or sub-sonic filter now I can when I buy one of these. Another missing product that the car audio industry needs. Good job Mead keep up the good work!!!

[mikeunivers]

i like bloopers jajajja

[HateBrutal]

Wow that's neat,that Kenwood head unit you had on the bench is exact one I just put in my car,sweet!

[GoldFish705]

couldnt the dd1 and the cc1 be combined into the same device?

[elcarlos530]

my brother has the same brand but its a 1,000 watts with 2 12s in a sepret box and dus not have the bass setup right

[HtcDroidIncredible]

he shit his pants

[yzf7steve]

Hey Steve could you do me a favor and run one of those Crunch on your amp dyno and tell us how much power they actually put out? For years I used Crunch and I've always know they didn't make nearly what they claim rms. If you could do this it would answer a question that's bugged me since the early 90's! Thanks!

[CLNFREAK1]

nice work steve

[PETERGUNZZ559]

good stuff meade, we came across this prob trying to gain match 2 usamps 2000 to 2 re xxx 12's, this would of been perfect..... I see if my boy will go halfs on the Crossover Calibrator. thanks for everything you brought to the game bro..

[585Lowrider]

so wait.. its like a amp tuner?

[kyle3420]

Quote the description: "We also have a whole line up of interesting products that we will introduce soon!"

What sort of cool ideas shall we see in the future? I Can't wait... :)

[hexflip]

You would think companies would make it easier for us to tune our amps, using more markings than just 2.....I appreciate your products Steve, the DD-1 is sick too.

[tacomabanga1986]

ok what dose the little thing on the bottom do, does it light up or just for looks?

and im in for w/e to try n win one of the amps =)

[tylerspyler2]

I see you are using the kenwood kdc head unit. How does it compair to other hu in the same price range?

[killaslice7]

Very badass!!! Is there anyway to tell which amp is putting out the most power before calibrating all of them? And is this one for sale yet with the dd-1??

[asiangunner901]

yo steve how did you wire those subs up 2 the amp? 1amp positive 2nd amp neg too 1 sub?

[skipjack5200]

Steve, been a long time viewer loving all the new products you are getting out there for the car audio game. keep doing it big and never stop ballin

[theaudiophilestore]

Nice tutorial of the new CC-1 Steve! Hey, what bass CD are you using towards the end of the video to demo the fully calibrated amps on your woofers? I want to get it. Thanks!

[mk3334]

It could just be me but i just wanted to see the subs jump at the end lol.