rx7 with a piston engine,you should burn that car to fuck down,it sounds just like the owner fucking gay mother faggot,shame on all you guys who do that shit,gay mother fucker
Well remember that there is a 2005 DRIFT mustang that actually beat a Nissan Skyline. I have taken turns in my Camaro going close to 90 or 100 MPH and drifted it. Most Muscle Cars can take sharp turns if you know how to drift.
Umm...lol thats great that ur car is faster..have u ever been to a drag strip?? Theres a LOT of faster cars then mine..and probably yours...u fucking idiot.. have i stated in these videos that this car is faster then anything? Actually if u want to check my videos my fastest run to date is on there 11.07@124mph. Thanks and FUCK OFF! Have nice day!
@Coolkid89383 way to wiki a 70 z28, lt1 350 huh? you channel say its a 375hp 396...Internet anonymity makes liars of alot of people, the least you could do is keep your story straight and stop disrespecting other peoples rides.
This comment has received too many negative votesshow
No those are the standard options i looked up in a book called The Camaro White Book. I oringally bought the car in late 2000 at a Pomona Swap Meet in the same condition for 8,000 USD. It didn't have the standard motor in it. What it had was the 396 used the in Corvette.
@Coolkid89383 is that rear wheel hp or wish it was.... I have a 72 chev c-10 small block.... 490 rear wheel hp. 4:30 rears.... 31" mickey ET streets..... and a NHRA PRO GAS license. not bagging on ya just keep your facts right .. ur page says 375 hp. so which is it?
Thats great...if u were any kinda racer, u wouldnt be such a dick and actually know that it only comes down to money. I just put myself through university for 4 years and have only just NOW started to save some money to put into this thing. I dont think im doing too bad for a basic iron headed small block that was built on a 800 dollar budget.
This comment has received too many negative votesshow
WTF you'r a douche! a worked 13b n/a with trumpets would even beat thia peice of shit! Turbod your not even in the game! Hang your head in shame for wrecking a great car!
thats terrific, who wants to work on a motor with smaller displacement then a bottle of coca cola? I had 4K to build a car, thats what i came up with thats including rims, paint and cost of car. 11.07@124mph. If you can do better then do it and stop being an internet hero you douche!
@bigbuffbaldguy WTF are you even saying you muppet! 16 second wanna be you dip shit my 347w runs 12.1 and my gsxr1000 runs 10.3, 16 sec you sir are a faggot who wants black guys sweaty balls on ya back! Dont reply i dont like homos!
go to my home page and watch some of my favorite video . In puerto rico almost all of race car run with rotary engine and yes i am from puerto rico . my car is peripheral ported keep on racing man
Well thats great, but I live in Northwestern Ontario, the nearest rotary mechanic lives about 18 hour drive away. A v8 is a lot simpler and more readily available here. So why is it that u gotta yap at me? I'll keep doing what I'm doing and you keep doing what ur doing and we'll both be fine im sure.
MY QUARTER MILE TIMES FROM THIS YR...100shot of nitrous 11.66@116. Still keeping my 5K budget including cost of car, paint, rims, and engine. Thanks for comin out!
lightweight good handling car with lots of available parts and info + a great engine with lots of power parts and ifno. Who cares what country the NAMEPLATE is from. The cars/motors arent even made in the countries of the companies half the time anyway. I like the rotary cause its cool and different, but i would take an ls1 over any rotary.
I thought the rotary engines are fine as they are. I am new to the RX7. I am getting an FC soon. Is it really worth putting a V8 or small block LS1 Engine in there? Or just roll with the rotary engines? I kinda wanted to go with a triple rotary.
Well, the stock rotary's were not the most reliable engine out there, they can make good power with teh right amount of money and know-how, but for beginners a v8 is a lot easier and cheaper. I dunno how the 20B rotaries are, but its total personal preference. I like v8's...ls1 fits in perfect...and its cheaper then most builds out there. Good Luck.
Yeah that's what I keep hearing. That V8 is a cheaper modification for that power quicker and on a budget. I am only getting an RX7 FC because I can get one very cheap right now and we know a guy who can rebuild these rotary engines blindfolded and I want him to show me. At least until I can afford an RX7 FD. I can't seem to part with my Celica, as I am constructing it to a GT4. So The FC it is for now. Thanks for your reply though.
Eat my dick ROTARD....my build was under 4000dollars including cost of car, and paint, and I ran 12.2 @ 111mph with PLENTY left in it. Sure its a little front heavy now, but when I buy my aluminum heads and get some good springs under it, the car will be pretty much exactly the same as your gay 13BT. If I was a retard and had small dick syndrome, I would have tried to make lots of power with something really small, but I dont have anything to prove so fuck off.
Nothing wrong with being different buddy. And by the way, the 13b engine has little torque and its all in the high rpms. By the time it reaches those high rpms, this rx7 will be a great length down the road. This car has balls man, ur little gimpotary engine is something for people with big ego's and little to show for it. Anyways ive had enough with this ROTARD..
agreed I am putting a sbc in my fc to, why spend the money having to rebuild a weak ass engine. don't get pissed that an rx7 with a v8 can kick your ass on the drag then loss you on the back roads. plus dude probably drives a fricken ford fiesta.
No they are not they are VERY reliable, where are you getting your information? Oh wait! I have seen you everywhere, you go around and spam all the RX7 and rotary videos. You are spreading LIES!!!
FC sexiness with a V8 rumble. Double win.
randomted 2 months ago
rx7 with a piston engine,you should burn that car to fuck down,it sounds just like the owner fucking gay mother faggot,shame on all you guys who do that shit,gay mother fucker
skeckevo 7 months ago
How much will the build cost like can some one send me links on how to do it An the mounts to use
charliemac94 11 months ago
Junk rotary taken out means the car now kicks ass!
Rotaryisgarbage 1 year ago
nice ride man. sounds good
JPdrummer27 1 year ago
Congrats on the car! That thing moves.
Rotaryisgarbage 1 year ago
Car is so much better without the junk rotary engine!
Rotaryisgarbage 1 year ago
just remember that 70 camaro and most muscle cars would be field toast at first turn at least ur rx will turn "left and Right" !!!!
speedwolf72 1 year ago
This comment has received too many negative votes show
@speedwolf72
Well remember that there is a 2005 DRIFT mustang that actually beat a Nissan Skyline. I have taken turns in my Camaro going close to 90 or 100 MPH and drifted it. Most Muscle Cars can take sharp turns if you know how to drift.
Coolkid89383 1 year ago
Nice car man, I love the "why we build v8 rx7's" video. Makes me miss my v8rx7! Check my vids!
rifkenstein 2 years ago
This comment has received too many negative votes show
My '70 Chevy Camaro Z28 would easily smoke this car not to mention blow the doors off
Coolkid89383 2 years ago
Umm...lol thats great that ur car is faster..have u ever been to a drag strip?? Theres a LOT of faster cars then mine..and probably yours...u fucking idiot.. have i stated in these videos that this car is faster then anything? Actually if u want to check my videos my fastest run to date is on there 11.07@124mph. Thanks and FUCK OFF! Have nice day!
mkelly1983 2 years ago 3
This comment has received too many negative votes show
i've been to the drag strip and i score 2nd if it wasn't for that 67' Nova II boasting 700hp
my fastest is a 9.36 at 146MPH
Coolkid89383 2 years ago
This comment has received too many negative votes show
And sorry i haven't been on because i've actually passed college.
And heres the specs of my 1970 Camaro Z28
Specs
350-LT1 Turbo-Fire engine that puts out 360 Horsepower
4 Speed Manual hydra matic transmission
Top Speed 150 MPH
0-60 in 5.6 secs
Coolkid89383 1 year ago
This comment has received too many negative votes show
And sorry i haven't been on because i've actually passed college.
And heres the specs of my 1970 Camaro Z28
Specs
350-LT1 Turbo-Fire engine that puts out 360 Horsepower
4 Speed Manual hydra matic transmission
Top Speed 150 MPH
0-60 in 5.6 secs
oh and also heres my time at the Pomona Drag Strip
9.47@ 147 MPH
Coolkid89383 1 year ago
@Coolkid89383 way to wiki a 70 z28, lt1 350 huh? you channel say its a 375hp 396...Internet anonymity makes liars of alot of people, the least you could do is keep your story straight and stop disrespecting other peoples rides.
AssGasketBill 1 year ago 9
This comment has received too many negative votes show
No those are the standard options i looked up in a book called The Camaro White Book. I oringally bought the car in late 2000 at a Pomona Swap Meet in the same condition for 8,000 USD. It didn't have the standard motor in it. What it had was the 396 used the in Corvette.
Coolkid89383 1 year ago
@Coolkid89383 or 396 used any many other chevy's.
And trust me, the 396 is a dated motor, period!
leonvoltaire 1 year ago 2
@Coolkid89383 is that rear wheel hp or wish it was.... I have a 72 chev c-10 small block.... 490 rear wheel hp. 4:30 rears.... 31" mickey ET streets..... and a NHRA PRO GAS license. not bagging on ya just keep your facts right .. ur page says 375 hp. so which is it?
speedwolf72 1 year ago 6
This comment has received too many negative votes show
@speedwolf72
Its a typo i ment to say 360 HP but my friend was showing me some 1970s Corvettes with the LT1s
Coolkid89383 1 year ago
Thats great...if u were any kinda racer, u wouldnt be such a dick and actually know that it only comes down to money. I just put myself through university for 4 years and have only just NOW started to save some money to put into this thing. I dont think im doing too bad for a basic iron headed small block that was built on a 800 dollar budget.
mkelly1983 2 years ago 7
@Coolkid89383 lets see this Camaro...
AssGasketBill 1 year ago
This comment has received too many negative votes show
Look on my icon at my channel. Theres the answer.
Coolkid89383 1 year ago
This comment has received too many negative votes show
@Coolkid89383 Lets not compare that REAL car with this POS in the VID
JuanPapaNicolao 1 year ago
This comment has received too many negative votes show
@JuanPapaNicolao
I know bcause it will smoke it any day.
Coolkid89383 1 year ago
@Coolkid89383 not to mention that this car probably weighs 1000lbs less than your 70s camaro.
Vortes 1 year ago
This comment has received too many negative votes show
@Vortes
Doesn't matter if it does, The Z28 is making 360 HP(stock) and i have taken some very sharp corners in it even drifted.
Coolkid89383 1 year ago
@Coolkid89383 suck my ding a ling a ling...you dont even own a car you troll
bigbuffbaldguy 8 months ago
This comment has received too many negative votes show
WTF you'r a douche! a worked 13b n/a with trumpets would even beat thia peice of shit! Turbod your not even in the game! Hang your head in shame for wrecking a great car!
dreadly101 2 years ago
You are an idiot as a 13B with trumpets would be a 17 second car. Rotard.
aji8 2 years ago
Bahahah dont know know's building your engines or tuning them. Try 13sec maybe even 12's!
dreadly101 2 years ago
LOL..I guess you are delusional then. They usually can't get out of the mechanics shop.
aji8 2 years ago
thats terrific, who wants to work on a motor with smaller displacement then a bottle of coca cola? I had 4K to build a car, thats what i came up with thats including rims, paint and cost of car. 11.07@124mph. If you can do better then do it and stop being an internet hero you douche!
mkelly1983 2 years ago 3
The 13B is actuallly a 3.9L not a 1.3L.
stangalltheway 1 year ago
@dreadly101 Ahh I dont think so loser...I own a rx7 and you my sir are full of SHIT!!!! 13na can suck my chocolate salty ballz!!! 16 second wanna be
bigbuffbaldguy 8 months ago
@bigbuffbaldguy WTF are you even saying you muppet! 16 second wanna be you dip shit my 347w runs 12.1 and my gsxr1000 runs 10.3, 16 sec you sir are a faggot who wants black guys sweaty balls on ya back! Dont reply i dont like homos!
dreadly101 7 months ago
nice car, dont agree to tha v8 but, each to there own i guess
onojRX3 2 years ago
nice build
SauceyJamie 2 years ago
gotta admit that is is badass....have a white FC in my driveway that may get the V8 too...!
halpern6 2 years ago
Do something cool with the rotary.
yerboogieman 2 years ago
LIke what? I guess it would make a cool door stop, or coffee table base.
That is about all it is good for.
aji8 2 years ago
VERY NICE. The rotary only wishes it could go like that. Now the car is MUCH better,
aji8 2 years ago
go to my home page and watch some of my favorite video . In puerto rico almost all of race car run with rotary engine and yes i am from puerto rico . my car is peripheral ported keep on racing man
pimen333 3 years ago
Well thats great, but I live in Northwestern Ontario, the nearest rotary mechanic lives about 18 hour drive away. A v8 is a lot simpler and more readily available here. So why is it that u gotta yap at me? I'll keep doing what I'm doing and you keep doing what ur doing and we'll both be fine im sure.
mkelly1983 3 years ago
Eh, I'm with mkelly I would much rather have a v8 vs a rotary.
MikeHuntIsItchy 3 years ago
@pimen333 all i see is anime!
gsxrsixer 1 year ago
MY QUARTER MILE TIMES FROM THIS YR...100shot of nitrous 11.66@116. Still keeping my 5K budget including cost of car, paint, rims, and engine. Thanks for comin out!
mkelly1983 3 years ago
very nice buddy haha.. ive thought about converting to v8 but im loving my rotary too much.
Audi2000t 3 years ago 2
who much did it cost to put in the v8 cuz i want to do the same thing
fullymental307 2 years ago
lightweight good handling car with lots of available parts and info + a great engine with lots of power parts and ifno. Who cares what country the NAMEPLATE is from. The cars/motors arent even made in the countries of the companies half the time anyway. I like the rotary cause its cool and different, but i would take an ls1 over any rotary.
isphius 3 years ago
I thought the rotary engines are fine as they are. I am new to the RX7. I am getting an FC soon. Is it really worth putting a V8 or small block LS1 Engine in there? Or just roll with the rotary engines? I kinda wanted to go with a triple rotary.
24okay 3 years ago
Well, the stock rotary's were not the most reliable engine out there, they can make good power with teh right amount of money and know-how, but for beginners a v8 is a lot easier and cheaper. I dunno how the 20B rotaries are, but its total personal preference. I like v8's...ls1 fits in perfect...and its cheaper then most builds out there. Good Luck.
mkelly1983 3 years ago
Yeah that's what I keep hearing. That V8 is a cheaper modification for that power quicker and on a budget. I am only getting an RX7 FC because I can get one very cheap right now and we know a guy who can rebuild these rotary engines blindfolded and I want him to show me. At least until I can afford an RX7 FD. I can't seem to part with my Celica, as I am constructing it to a GT4. So The FC it is for now. Thanks for your reply though.
24okay 3 years ago
Nice set up i got a 350 V8 sbc with 350 turbo tranny what mods u got?
chinox32 3 years ago
fucking gay. a 13bT would eat it, and would have kept weight geometry correct. v8s in jap cars FTL.
gulivr 3 years ago
Eat my dick ROTARD....my build was under 4000dollars including cost of car, and paint, and I ran 12.2 @ 111mph with PLENTY left in it. Sure its a little front heavy now, but when I buy my aluminum heads and get some good springs under it, the car will be pretty much exactly the same as your gay 13BT. If I was a retard and had small dick syndrome, I would have tried to make lots of power with something really small, but I dont have anything to prove so fuck off.
mkelly1983 3 years ago
you could have put the motor in a american car then i would have respected it.
putting a v8 in an rx7 is plain WRONG.
gulivr 3 years ago
Nothing wrong with being different buddy. And by the way, the 13b engine has little torque and its all in the high rpms. By the time it reaches those high rpms, this rx7 will be a great length down the road. This car has balls man, ur little gimpotary engine is something for people with big ego's and little to show for it. Anyways ive had enough with this ROTARD..
Nice car bro!! love it!
urexisaloser 3 years ago
agreed I am putting a sbc in my fc to, why spend the money having to rebuild a weak ass engine. don't get pissed that an rx7 with a v8 can kick your ass on the drag then loss you on the back roads. plus dude probably drives a fricken ford fiesta.
jordanbmxer21 3 years ago
Or drives nothing at all lol
urexisaloser 3 years ago
Your gay. Have you seen how fast 1.3 rotaries are going? Now in 6 second zone. 1.3!!!!!!!!
fuknhel 2 years ago
and then the engine blows. Rotaries are very unreliable.
aji8 2 years ago
No they are not they are VERY reliable, where are you getting your information? Oh wait! I have seen you everywhere, you go around and spam all the RX7 and rotary videos. You are spreading LIES!!!
yerboogieman 2 years ago
How about you go to any Rx7 forum moron. You can find the truth there instead of your distorted reality.
aji8 2 years ago
What do you mean?
yerboogieman 2 years ago
Just what I said. Go to any rx7 forum and find all the complaints about frequent rebuilds of the rotary engine.
aji8 2 years ago
fuck yea dude, thats tight. u should post your quarter times up
cutesk8erboy 4 years ago
actually, bicycles are gay- that RX7 kicks ass
tonedeftony 4 years ago