Take the wire thats wrapped around the landing gear , unwrap it and stretch it out along the end close to the tail rotor. They say you get reception .
is that a 7.4v 2200mAh, 20c or is it a 25c? i cant tell because you couldnt keep cam still for a few seconds, no offense btw, if you can plz reply back or someone notice if its a 20c or 25c plz respond back to me..... and thx for who ever responds back
question can i use a samsung 1100 mah 7.4v with my original 7.4v 1300 mah polimor battery to make a 2400 mah upgraded battery this is a custom job, my question again can this be done with a burn out of the main board or over heating ..
also does anyone know of heli rc web sites that take money order or cert check i dont deal with credit i am speaking of rc helicopter web sites in canada not us thanks ....
Hello just really need to know if 20c 2200 mah battery 110 grms would the 20c be too high for my regular charger and will it fry or over heat my ctrl board i dont want to have to pay more for repairs, has your board or charger system handle well so far
The front light (and the rear light) are simply plugged into the main circuit bopard - simply follow the wires and carefully unplug them! But keep in-mind that the lights are LEDs and use VERY little power - it will not make much difference on flying time (maybe a second or two)....OK?
The front light (and the rear light) are simply plugged into the main circuit bopard - simply follow the wires and carefully unplug them! But keep in-mind that the lights are LEDs and use VERY little power - it will not make much difference on flying time (maybe a second or two)....
Just received my " TURNIGY" 7.4v 2200mAh LiPo, however, the connector from the battery that is supposed to connect to the heli is clearly different. Specifically what adapter size or type should I use? Thanks, Ken
@aydinb90 Hi, Is the original battery the same size as the new one? I have a T 23 and it takes the same battery type as the 9053 but I can't find the same type as the one in your 9053
hola, compre un helicoptero modelo 9053 pero hago todo lo que me pide el manual. cargue la pila la conecte encendi el rc control.... Pero el hc no hace nada... quien me puede ayudar con esto?
primero conectar pila con la bace del helicoptero cargar bateria por 1 hora aprox. dos prender el led del control y listo si ya haces esto y no funciona el control te salio mal, saludos gsosad86@hotmail.com
@ceom19 saludos de guadalajara , mira es una secuencia tienes que poner el aselerador asta rida entonses prende el control y luego vaja el aselerador asta vajo, y otra ves aselera asea riva pero con quidado???
hi, can i ask a question please? can i upgrade my 9053 volitation battery to HiModel Li-polymer Battery 7.4V 25C 2200mAh 2S? will it be ok? will it fit perfectly?
This heli is so hungry, I put 1.8A lipo in it and it ate it in 4 minutes.
Hobby331 3 days ago
What brand is the battery ? Did it fix the tail heave problem also ? How long is your runtime now ? What was it before ? Dennis
n6ugyham 2 weeks ago
@n6ugyham the battery is here h t t p://tiny.c c /w v m 66 (short linked) (delete spaces)
puffles234 2 weeks ago
what sight the u buy the charger from and whats the name
ABLSHATTA 1 month ago
Im looking for that same batt. Anyone find one yet?
jeepbeach 1 month ago
Take the wire thats wrapped around the landing gear , unwrap it and stretch it out along the end close to the tail rotor. They say you get reception .
jeepbeach 1 month ago
is that a 7.4v 2200mAh, 20c or is it a 25c? i cant tell because you couldnt keep cam still for a few seconds, no offense btw, if you can plz reply back or someone notice if its a 20c or 25c plz respond back to me..... and thx for who ever responds back
Demon11775 2 months ago
My helo with the origional battery can fly for about 15 to 20 minutes
518735 2 months ago
This has been flagged as spam show
Could someone please help! I cant walk five feet away from my 9053 before it looses signal, what should I do?? :)
Tommeezoom1998 3 months ago
This has been flagged as spam show
There are spare parts for this helicopter!
Blade Set;
ebay.com/itm/300563662885
(dont forget to put 3 'w' at the beginning)
ahm1900 4 months ago
can you tell me if it goes well this battery
Batteria-LiPo-da-7-4v-2600mAh-88x28x14mm-20C-30peak weight 80g
enrizjedi 5 months ago
question can i use a samsung 1100 mah 7.4v with my original 7.4v 1300 mah polimor battery to make a 2400 mah upgraded battery this is a custom job, my question again can this be done with a burn out of the main board or over heating ..
tvtubedog 7 months ago
also does anyone know of heli rc web sites that take money order or cert check i dont deal with credit i am speaking of rc helicopter web sites in canada not us thanks ....
tvtubedog 7 months ago
Hello just really need to know if 20c 2200 mah battery 110 grms would the 20c be too high for my regular charger and will it fry or over heat my ctrl board i dont want to have to pay more for repairs, has your board or charger system handle well so far
tvtubedog 7 months ago
it should do
Mr4RC4king 7 months ago
I found Flight Max 2200 mah 2 cell 20C,
Balance Plug: JST-XH
Discharge plug: XT60
does it fit the default charger ???
sayedmuzammil 7 months ago
7.4V 2200MAH 20C Lipo Battery RC Receiver Futaba JR BEC
Ebay.com
yadiel1234 7 months ago
Checked on Ebay. I cant find this battery anywhere. The only ones i can find are 122 grammes in weight. This one is supposedly only 110 grammes.
Are you sure that it is 110g?
baggie00001 9 months ago
right on man now i know that there is a better battery i was hopeing there was thanks
MUSTANGMAN50LX 10 months ago
Elicottero RC VOLITATION 9 053 modifiche by MeScHiO....
Visita il mio CANALE...
: )
MeScHiO003I 11 months ago
Hi i also want to order this battery
But what is your experience ??
Is it a direct replacement does it fit straight away?? Or did you have to customize parts?
How does the heli reacts
Isnt it to heavy now?
And doesnt it go to hot
Please let me know
Thanks great vid!!!!!
spdfrk2006 1 year ago
does it use the stock charger that came with the origanal batt?
bboywicked1 1 year ago
@bboywicked1
I use the other charger.
aydinb90 1 year ago
@aydinb90 What charger did you use? What is the model and name and how fast does it charge the battery?
zoranv82 9 months ago
what sight did you buy that batt?
bboywicked1 1 year ago
@bboywicked1 :ebay.com
aydinb90 1 year ago
@aydinb90 if my helicopter comes witha 1100mah battery should i buy a 2200 mah or 1200mah battery thankyou
callofdutyfreak39 4 months ago
well?? how does it fly now???
mrmetal60 1 year ago
This has been flagged as spam show
The front light (and the rear light) are simply plugged into the main circuit bopard - simply follow the wires and carefully unplug them! But keep in-mind that the lights are LEDs and use VERY little power - it will not make much difference on flying time (maybe a second or two)....OK?
URLZN 1 year ago
The front light (and the rear light) are simply plugged into the main circuit bopard - simply follow the wires and carefully unplug them! But keep in-mind that the lights are LEDs and use VERY little power - it will not make much difference on flying time (maybe a second or two)....
URLZN 1 year ago
does some one now if you could turn off the front light on the 9053 & if that will make the battery last longer....
TheRoach00 1 year ago
Hello aydinb90, you know where I can buy the battery (7.4 2200mAh Lipo).. a website thanks, julian
julianysr 1 year ago
I wouldn't recommend flying this helicopter that long. Not allowing the motors to cool down is a great way to burn out these brushed motors.
kurpalrc 1 year ago
Hello aydinb90,
Just received my " TURNIGY" 7.4v 2200mAh LiPo, however, the connector from the battery that is supposed to connect to the heli is clearly different. Specifically what adapter size or type should I use? Thanks, Ken
mdmkn420 1 year ago
@mdmkn420 SHOVE IT UP YOUR ANUS YOU WOG CUNT
FATBELLYJONES1 1 year ago
This has been flagged as spam show
@mdmkn420 SHOVE IT UP YOUR ANUS YOU WOG CUNT
FATBELLYJONES1 1 year ago
BUT BE CAREFULL,
if you flying over 20 min,you can get problem with the pbc's (main board)transistor!!!
aydinb90 1 year ago
donde consigo la pila de 20 minutos .
gabo089 1 year ago
en e-bay la referencia es (7.4V 2200MAH RC Receiver Lipo Battery Sanwa Futaba BEC)
julianysr 1 year ago
@aydinb90 Hi, Is the original battery the same size as the new one? I have a T 23 and it takes the same battery type as the 9053 but I can't find the same type as the one in your 9053
MrAnalogue1 1 year ago
@aydinb90
Do you mean the transistor becoming hot and may be blow out?
scoutdandan 1 year ago
@scoutdandan yes.
aydinb90 1 year ago
I bought the battery from EBAY! :)
GOOD LUCK!
aydinb90 1 year ago
hola, compre un helicoptero modelo 9053 pero hago todo lo que me pide el manual. cargue la pila la conecte encendi el rc control.... Pero el hc no hace nada... quien me puede ayudar con esto?
ceom19 1 year ago
This has been flagged as spam show
primero conectar pila con la bace del helicoptero cargar bateria por 1 hora aprox. dos prender el led del control y listo si ya haces esto y no funciona el control te salio mal, saludos gsosad86@hotmail.com
gabo089 1 year ago
@ceom19 saludos de guadalajara , mira es una secuencia tienes que poner el aselerador asta rida entonses prende el control y luego vaja el aselerador asta vajo, y otra ves aselera asea riva pero con quidado???
TheRoach00 1 year ago
Does your 7.4v 2200mAh charge from the 7.4v 1300mAh (the models original LiPo) charger?
mdmkn420 1 year ago
@mdmkn420 yes mate it works i have a 2100 and i use the chager i got iwth the helicopter
revparsons3tl 1 year ago
hi can can you tell me were you got your batt from
revparsons3tl 1 year ago
Hi kentorcompact, I instaled a lipo in my 9053 and It was very good. I used a 2200, 2c, 7,4v turnigy. I can flight around 15 minutes.
webtres 1 year ago
hi, can i ask a question please? can i upgrade my 9053 volitation battery to HiModel Li-polymer Battery 7.4V 25C 2200mAh 2S? will it be ok? will it fit perfectly?
kentorcompact 1 year ago