You refer to the SSH program Putty, but when you start Putty it doesn't just open up a Terminal, but asks you to log in to something... why don't you state in the tutorial how to start the Terminal, it's uselss otherwise...
sorry but video explanation here is very very poor. You can't just pile into terminal and assumer everybody can use it. And as well as that, terminal for mac doesn't operate the same as putty for windows. If people are looking for a tutorial, you have to tutor the viewers. Instead you just assume! and do a bad job assuming too.
Maybe you can help but i have did this process before, my apple tv was updated to 4.4 and i have already jailbroken it. But when i try to ssh to my apple tv2, terminal gives me a warning message that the remote host identification has changed. Also that he rsa host key for my apple tv has changed. any help would be appreciated
ok so that's done and jailbroken. however I am having a lot of problems installing icefilms. First off I uploaded the repository file to atv2 with a file sharing program (i use a mac so had to download filezilla) When I go into XBMC - Settings - etc. I see the name of the file on xbmc when I go into the folder i don't see the actual zip file to install. What am I doing wrong? Pelase help spent way to many hours screwing around with it:)
I just got my Apple TV2 and this video just confused me. It doesn't explain if by installing this XBMC if that jailbreaks the device. Also it doesn't explain how to stream movie, videos and music on your PC to your TV. Can someone please explain and go into a little more depth. Thx
@LetsKeepItSimple4 ok I jB using someone else posted a video. Your video leaves out crucial information. Like am I supposed to plug the ATV into the computer or HDMI connect to the TV. and how to install the XMBC onto the APtv. Can u explain or guide me to video. I don't want to screw it. Thanks
@LetsKeepItSimple4 No you confused me. When I install XMBC where should my ATV2 be plugged in. You didn't mention that in your video. Should I plug it into computer or the TV when install this SSH & putty stuff. Please help.
@cubaninfl Hey goofball, my comment was posted 4 months ago and the problem was solved. SMH However, I have noticed that people posting comments now are saying the same as me. He left a lot of information out of his video. So if anyone needs to read and read again. It would be YOU! SMMFH
@TheErmhmm not that im currently aware of, You could just leave your atv on XBMC if your on 4.2.1 or below and have an untethered jailbreak since the aTV itself never truly turns off by itself. It will just recover out of sleep mode right into where you were last in XBMC. I'll look into it for more details but at this point I do not believe it has been done yet.
Guys when you jailbreak your ATV2 there are downloads section inside nitoTV where you can find xbmc install. Much simpler than going through all the terminal and command operations. Hope this helps
@superduckman45 and everyone else that has asked how to set up xbmc, I am in the process of making a video for it and should have it up within the next 24 hours
I installed it into my ATV 2G but now I dont know how to configure it to stream movies from my mac (to add the source). Plex working great and it was easy to make it work but not the same with XBMC. Not very friendly user. any help?
@dhickz1 sometimes terminal will tell me I have timed out, what works for me is shutting down everything and rebooting it. I can't be sure about the mac mini though, but give it a shot hope that helps
@Irunwild31 a couple things, first to answer your question. No that won't kill the Jailbreak. But I think what your asking is will you have to reboot it into its Jailbroken state, the answer is no to that as well.
Also for other people seeing this. If you are on firmware 4.1, or 4.0, then when you install things using ssh you will type killall Lowtide.
If your on 4.2, or 4.1.1 then you will type killall appleTV.
You refer to the SSH program Putty, but when you start Putty it doesn't just open up a Terminal, but asks you to log in to something... why don't you state in the tutorial how to start the Terminal, it's uselss otherwise...
LimaTangoFoxtrot 3 days ago
Hey, Scott! Did you realize that you called it "XMBC" rather than "XBMC" from :05-:09?
Funny :P
JustinMarkWright 5 days ago
The link is broken, I need it!
mnvikes169 1 week ago
this is a bad tut i cant even follow it
MOZZWIGAN 1 week ago
This video doesn't show WHERE to actually type these commands. Terrible tutorial.
ocojaa 3 weeks ago
How do you update xbmc on apple tv? There is a new Eden 2 update out and I want to update.
Poppi3579 1 month ago
sorry but video explanation here is very very poor. You can't just pile into terminal and assumer everybody can use it. And as well as that, terminal for mac doesn't operate the same as putty for windows. If people are looking for a tutorial, you have to tutor the viewers. Instead you just assume! and do a bad job assuming too.
sorry dude, but truth be told
rayminster32 1 month ago
Maybe you can help but i have did this process before, my apple tv was updated to 4.4 and i have already jailbroken it. But when i try to ssh to my apple tv2, terminal gives me a warning message that the remote host identification has changed. Also that he rsa host key for my apple tv has changed. any help would be appreciated
fonsotrilla09 1 month ago
WTF there is nothing SIMPLE about this video!
precise305 1 month ago
He made some mistakes, Follow this..
apt-get update
apt-get install org.xbmc.repo
apt-get update
apt-get install org.xbmc.xbmc-atv2
Thumbs up so people can see!
LCSerapio 1 month ago 13
ok so that's done and jailbroken. however I am having a lot of problems installing icefilms. First off I uploaded the repository file to atv2 with a file sharing program (i use a mac so had to download filezilla) When I go into XBMC - Settings - etc. I see the name of the file on xbmc when I go into the folder i don't see the actual zip file to install. What am I doing wrong? Pelase help spent way to many hours screwing around with it:)
scentmarketingcanada 1 month ago
WHERE IS THE FUCKING DOWNLOAD LINK
tapdancegirl88 1 month ago
I did not enjoy the video. This shit sucks ass. I know less than when I decided to watch this shitty as video.
XsanmarX 1 month ago
my terminal apt-get update command isnt working
WJProProductions 1 month ago
you keep misspelling the commands man, anyone who's new to this won't figure this out update this vid
ceraz052 1 month ago
Lets keep it simple, my ass!
LordMiranda 2 months ago
what a tosser FCK ALL WORKS, NO LINK AND NO PACKAGE FOUND,PRICK!
sidvicious020279 2 months ago
its blows. I was awaiting 4.4.3 untethered...now another update. Ugh. 4.4.4 damn
mrKiryo 2 months ago
I get this message
E: Couldn't find package org.xbmc.xmc-atv2
slinkos 2 months ago
@slinkos he accidently messed up, instead write apt-get install org.xbmc.xbmc-atv2
LotsOfAzianPride 2 months ago
your link dont work bro
Biohazerd2012 2 months ago
Defenetly looks very easy to install XBMC, the question is will this process work with version 4.4.1 jailbroken.
Do you think is necesary to write the first steps that are shown in the wiki.xbmc page. before it gets to apt-get install XBMC.
I just want to make sure because it looks too easy and I do not want to go thru the whole JB process.
Thank you
fredcrys 4 months ago
I just got my Apple TV2 and this video just confused me. It doesn't explain if by installing this XBMC if that jailbreaks the device. Also it doesn't explain how to stream movie, videos and music on your PC to your TV. Can someone please explain and go into a little more depth. Thx
StangoDango 5 months ago 2
@StangoDango This does not jb your atv.
To jb it check out my other videos.
To see how to set it up (xbmc) check out my video how to setup xbmc. Hope to help you with any future issues
LetsKeepItSimple4 5 months ago
@LetsKeepItSimple4 ok I jB using someone else posted a video. Your video leaves out crucial information. Like am I supposed to plug the ATV into the computer or HDMI connect to the TV. and how to install the XMBC onto the APtv. Can u explain or guide me to video. I don't want to screw it. Thanks
StangoDango 4 months ago
@LetsKeepItSimple4 No you confused me. When I install XMBC where should my ATV2 be plugged in. You didn't mention that in your video. Should I plug it into computer or the TV when install this SSH & putty stuff. Please help.
StangoDango 4 months ago
@StangoDango Read, read and read!!!! to install XBMC you must jailbreak your Apple TV 2 first!!!
cubaninfl 1 month ago
@cubaninfl Hey goofball, my comment was posted 4 months ago and the problem was solved. SMH However, I have noticed that people posting comments now are saying the same as me. He left a lot of information out of his video. So if anyone needs to read and read again. It would be YOU! SMMFH
StangoDango 1 month ago
so i followed everything step by step and still nothing worked. can not get xbmc to install and i already jail broke it with season pass
dookie6678 6 months ago
This has been flagged as spam show
I know how to install it, I just wish there were some videos on how to work the damn thing.
MrBfg586 6 months ago
I know how to install it, I just wish there were some videos on how to work the damn thing.
MrBfg586 6 months ago
yea, xbmc will allow you to stream all file formats
LetsKeepItSimple4 7 months ago
Will having xbmc let appletv run any video format?
I have many video formats on my network drive i want to stream to my apple tv
randomjunkguy 7 months ago
aka xmbc? it said xbmc right there on your screen, how could you mess up so quickly
smrtsTV 8 months ago
when i placed the apt-get install org.xmbc.repo it says at the end "e:couldn't find package org.xmbc.repo" please help
joaonedeff86 8 months ago
I dont understand!, what do I have to do First?, Mine is alreaddy jailbroken
wichotez 8 months ago
Is there a way to get it to boot straight into xbmc without you having to select it from the apple menu
TheErmhmm 11 months ago
@TheErmhmm not that im currently aware of, You could just leave your atv on XBMC if your on 4.2.1 or below and have an untethered jailbreak since the aTV itself never truly turns off by itself. It will just recover out of sleep mode right into where you were last in XBMC. I'll look into it for more details but at this point I do not believe it has been done yet.
LetsKeepItSimple4 11 months ago 2
Guys when you jailbreak your ATV2 there are downloads section inside nitoTV where you can find xbmc install. Much simpler than going through all the terminal and command operations. Hope this helps
arahimov1 11 months ago
@arahimov1 ok I JB using season pass. Now how to I get XMBC or Nito TV onto my ATV2? Also where do I plug the ATV2 into the computer or TV?
StangoDango 4 months ago
@arahimov1 Can you explain how to get NitoTv & XBmc onto the Atv2? The guy that made this video left out where to plug the ATV2 into what? lol Thankx
StangoDango 4 months ago
Thanks Man!
superduckman45 1 year ago
How do you stream videos from your computer. I don't know how to set it up
superduckman45 1 year ago
@superduckman45 and everyone else that has asked how to set up xbmc, I am in the process of making a video for it and should have it up within the next 24 hours
LetsKeepItSimple4 1 year ago
@LetsKeepItSimple4 the video for how to setup xbmc is live on my channel...
LetsKeepItSimple4 1 year ago
how do you set it up so it can stream videos.
superduckman45 1 year ago
Very well done, sir!
pb1051 1 year ago
I installed it into my ATV 2G but now I dont know how to configure it to stream movies from my mac (to add the source). Plex working great and it was easy to make it work but not the same with XBMC. Not very friendly user. any help?
xrumbax 1 year ago
i use mac mini and then i put my ip adress,,,,,,and said port 22,,operation time outhelp me plzzzzzzzzzzz
dhickz1 1 year ago
@dhickz1 sometimes terminal will tell me I have timed out, what works for me is shutting down everything and rebooting it. I can't be sure about the mac mini though, but give it a shot hope that helps
LetsKeepItSimple4 1 year ago
When I type in the final XBMC install command, I get the following:
E: Couldn't find package org.xbmc.xbmc.atv2
Any ideas on why this is happening??? I typed all the commands exactly as shown.
lengland10 1 year ago
This has been flagged as spam show
how do you point SSH to connect to Apple TV? That step was skipped.
ykhov 1 year ago
how do you point SSH to connect to Apple TV? That step was skipped.
ykhov 1 year ago
@ykhov Find out the IP address of your AppleTV, then in the terminal type "telnet ipaddress". Simple as that.
proximateo 1 year ago
when you kill Lowtide and it reboots...will that kill the tethered JB?
Irunwild31 1 year ago
@Irunwild31 a couple things, first to answer your question. No that won't kill the Jailbreak. But I think what your asking is will you have to reboot it into its Jailbroken state, the answer is no to that as well.
Also for other people seeing this. If you are on firmware 4.1, or 4.0, then when you install things using ssh you will type killall Lowtide.
If your on 4.2, or 4.1.1 then you will type killall appleTV.
LetsKeepItSimple4 1 year ago
Do you need to jailbreak before doing this
springer841 1 year ago 2
@springer841 Yes!
LetsKeepItSimple4 1 year ago
aka xBmc lol not xmbc that would stand for X Media Box Center good video tho dude
iMeAgainstTheWorldi 1 year ago
@iMeAgainstTheWorldi
haha whoops! Thanks for the heads up and glad you liked it!
LetsKeepItSimple4 1 year ago
:) :) :) :), Your Videos so much better now
Your on your way to the top
sonny899 1 year ago