Your video has inspired me to do the same with my nitro sport and this lil f@#ker screams. Torque is awesome. hard to keep the front tires on the ground but i wouldn't want it any other way. Although I am going to put an after market wheelie bar on it. Looks like you had fun. i love mine so much that i practically sleep with it...lmao. I put Anaconda tires on 2.8 chrome wheels on it. Basically the same tires and wheels that the Jato has.Also has a 72 tooth steel spur gear from robinson racing.
Ok to help some out. It has a 2.5./3.3 upgrade kit, stock black plastic pipe, and at the time had stock drive shafts in it. Now it has Jato drive shafts to eliminate the twisting or popping off problems.
@RangerRacer217 what do you mean by twisting or popping off? i can understand the popping off part but twisting?? your tellin me you twisted a shaft with the 3.3? thats crazy power dude! lol i might get me a set of those then, i have 2.5R but i dont wanna take any chances.
y put it in a sport? i put a 3.3 in my rustler cuz they hold up a lot better, hence the 2 piece chassis on the sport and the full aluminum chassis on the rustler.
I put a 3.3 in mine and now i keep throwing drive shafts and outputs. It tears them right in two. as far as i can find they don't make aluminum shafts that will work in it. did you have this problem? or do you have a fix?
@kingscstl I'd just go with MIP Steel outdrive cups and drive shafts. The Rustler and the Nitro Sport are basically the same so you could buy these drive shafts for your nitro sport even though they are meant for the rustler. There is no difference. its like they are interchangeable. Just my .02 cents.
Yeah..I never thought of it but it does sound like a kazoo is stuck in the pipe. Yeah I know both you guys...Yep your Tc 3 is a speed deamon...when you find traction that is.lol.
have you never heard a nitro rc car before it is basically a little 2 stroke engine that can run like 20 thousand rpm that fast my car is the tc3 that he recorded if its on hard asfault its wicked fast.
Id suggest putting a slipper clutch on ur sport before doing this upgrade or else youll be replacing spur gears a lot.
I upgraded using the traxxas 15 to 2.5 upgrade kit for the rustler. It is a direct fit on the sport and holds the 3.3 as well. No mods needed
RangerRacer217 1 month ago
how you upgrade the car lol?
TheMostvalubleGamer 1 month ago
dam thats hella fast. I have one but it has no slipper cluch do i need one i stillhave not run it
praynker 1 month ago
i rebuilt a .15 and ported it and a new pipe and can now out run a 3.3
slylumpkin 1 month ago
Nope a 2.5 conversion kit will also allow the 3.3 to fit. No major moddifications needed.
RangerRacer217 1 month ago
i thout you can only upgrade to 2.5r
zombieqtr 2 months ago
is the spur gear suppose to go quick cause it did for me
georgemazdarx8 6 months ago
i just got a sport yesterday and i need to kno how much you payed for the 3.3
swagboy0907 11 months ago
can you upgrade this to the TRX 3.3 without any mods?
007ajez 1 year ago
i hane a nitro sport and the motor is blown either going to upgrade motors or go brushless any suggestions
ripstik159 1 year ago
Your video has inspired me to do the same with my nitro sport and this lil f@#ker screams. Torque is awesome. hard to keep the front tires on the ground but i wouldn't want it any other way. Although I am going to put an after market wheelie bar on it. Looks like you had fun. i love mine so much that i practically sleep with it...lmao. I put Anaconda tires on 2.8 chrome wheels on it. Basically the same tires and wheels that the Jato has.Also has a 72 tooth steel spur gear from robinson racing.
monte19770 1 year ago
Getin Aaaafter It
monte19770 1 year ago
how fast will it go
56sledneck 1 year ago
Ok to help some out. It has a 2.5./3.3 upgrade kit, stock black plastic pipe, and at the time had stock drive shafts in it. Now it has Jato drive shafts to eliminate the twisting or popping off problems.
RangerRacer217 1 year ago
@RangerRacer217 what do you mean by twisting or popping off? i can understand the popping off part but twisting?? your tellin me you twisted a shaft with the 3.3? thats crazy power dude! lol i might get me a set of those then, i have 2.5R but i dont wanna take any chances.
midnightneonmatt 5 months ago
@midnightneonmatt i twisted meatal axels on a slayer
slylumpkin 1 month ago
no body?
TheTrent199 2 years ago
does driveshaft hold good in 3.3?
hondatmx 2 years ago
y put it in a sport? i put a 3.3 in my rustler cuz they hold up a lot better, hence the 2 piece chassis on the sport and the full aluminum chassis on the rustler.
nitrorcman108 2 years ago
Nice but once i get my nitro sport i'm dropping in an Os or picco instead of another trx enginev
Dr3aMyS0b 2 years ago
I put a 3.3 in mine and now i keep throwing drive shafts and outputs. It tears them right in two. as far as i can find they don't make aluminum shafts that will work in it. did you have this problem? or do you have a fix?
kingscstl 2 years ago
You can install jato 3.3 shafts in it and it will solve that problem. JUst look up "how to install jato driveshafts into a nitro rustler on google.
Xbox360481 2 years ago
@kingscstl I'd just go with MIP Steel outdrive cups and drive shafts. The Rustler and the Nitro Sport are basically the same so you could buy these drive shafts for your nitro sport even though they are meant for the rustler. There is no difference. its like they are interchangeable. Just my .02 cents.
monte19770 1 year ago
whitch parts did you changed? i want more power 4mine Nsport , but where to buy and what to buy i dont know what i can put in my car help me plzzz .
IceBlack406 2 years ago
???
IceBlack406 2 years ago
The traxxas pro.15 to 2.5 upgrade kit as well as a new 3.3 motor. Even though it says 2.5 the upgrade kit is compatible with a 3.3 motor.
RangerRacer217 2 years ago
@RangerRacer217
how about aluminium parts? can i use rustler alu parts om my nitrosport?
IceBlack406 2 years ago
does 2.5 can do wheely?
hondatmx 2 years ago
Nitros arent that loud when it comes down to it. Just keep the exhaust pipe on it. Open header is a different story.
It just depends on who whats to complain.
RangerRacer217 2 years ago
Man i want a nitro sport so bad but my dad thinks nitro cars are to loud to drive in town.
ColeJT14 2 years ago
can u mash the gas
is puting the 3.3 wort it or is it to much power
brandoncohen1994 2 years ago
Did you have to upgrade yours to two speed also?
ApacheNY2 2 years ago
Yeah..I never thought of it but it does sound like a kazoo is stuck in the pipe. Yeah I know both you guys...Yep your Tc 3 is a speed deamon...when you find traction that is.lol.
RangerRacer217 3 years ago
Thanks, I love my sport as well. Working on rebuilding it at the moment, with new upgraded parts!
RangerRacer217 3 years ago
Nice dude! I love my Nitro Sport!
pmanson0624 3 years ago
Is it supposed to sound like there's a kazoo stuck in it?
EDSCardShark 3 years ago
have you never heard a nitro rc car before it is basically a little 2 stroke engine that can run like 20 thousand rpm that fast my car is the tc3 that he recorded if its on hard asfault its wicked fast.
bnr3510 3 years ago
Dude, I know the guy. I was merely joking with him. <_<
EDSCardShark 3 years ago