i'd guess that either the teeth on the timing belt itself are gone or maybe just maybe the key on the crank where the timing gear fits onto the crank sheared but highly doubt that one
all the teeth are gone on your timing belt at the crank pulley my 1gb 7 bolt did the same thing rolling up to a street light in neutral. luckily since i was in neutral it just stalled the motor out and the valves were fine yours will be to just replace the timing belt and you will be golden!
i think the timing belt is broken at the bottom, o may be ripped off. u should check the timing belt and dont try to start as the piston will hit the valves and can band them. do upload the video is to wat was the problem.
WOW. that is not good at all. if the accesory belts are moving and the timing belt is not, the timing belt most have chard all the teeth off at the crank. in other words the crank teeth are just spinning on the timing belt with nothing to grab. the timing belt is done, dont crank it no more in tell you check the lower side of that timing belt. there is something that is holding the cams in place not letting them spin.let me know what it is.
Broken timeing belt
yami4g63 1 month ago
its a 7bolt lol go get a 6bolt it will fix all ur problems lol
supraevo87 1 month ago
crank walk
PrittyGrlSwag 1 month ago
timing belt bro.
gofast001 1 month ago
i'd guess that either the teeth on the timing belt itself are gone or maybe just maybe the key on the crank where the timing gear fits onto the crank sheared but highly doubt that one
thezuki69 4 months ago
all the teeth are gone on your timing belt at the crank pulley my 1gb 7 bolt did the same thing rolling up to a street light in neutral. luckily since i was in neutral it just stalled the motor out and the valves were fine yours will be to just replace the timing belt and you will be golden!
Indy360Boris 4 months ago
your timing is screwed. I'd be careful not to bend the valves
livedog626 4 months ago
It's a DSM, that's your problem.
Anonymous4chanuser 5 months ago
replace the timming belt
TheHappyerika 5 months ago
i think the timing belt is broken at the bottom, o may be ripped off. u should check the timing belt and dont try to start as the piston will hit the valves and can band them. do upload the video is to wat was the problem.
krishwarsha 5 months ago
My car has the same problem except my timing belt moves slow so im still trying to diagnose it
MosquitonHeather 9 months ago
WOW. that is not good at all. if the accesory belts are moving and the timing belt is not, the timing belt most have chard all the teeth off at the crank. in other words the crank teeth are just spinning on the timing belt with nothing to grab. the timing belt is done, dont crank it no more in tell you check the lower side of that timing belt. there is something that is holding the cams in place not letting them spin.let me know what it is.
Chuck403 9 months ago