More so when use in conjunction with another voice control addon called "Multi Crew Experience"(for which you can download a free demo). Just give voice commands, and the virtual co-pilot executes. In addition, you can talk to native FSX or FS9 ATC or even radar Contact ATC using your headset.
then u posted it in the coroute and then set the runway # then press activate and then the execute button, i did the same but when i press the activate bullet, it does not do anything. the execute button does not light up.
KSFOKLAX is a route that I created in FSbuild flight planning program, it saved it as KSFOKLAX. If you don't have a route programmed in that name, it won't work. Basically I was typing the name of the file that my plan was saved as. You have to do this as well, OR enter the route manually in the FMC by entering the From and To airports and the runway, then press Exec. You will then have to put in the route points in the legs page.
Yes you can do that within the simulator. Or just use an outside flight planning program to do it. But you're right, it's just the title of the flightplan file I'm using here.
@manbird12000 One should not post 'Level D' for anything that has to do with FS. Level for the FAA means amongst other things that the pilot can be blinded by the sun(simulated in FS) and 6 degrees of freedom motion rig(this FS does not simulate or PIC767 anyway)
Can someone please send me the Andre Folkers VC Textures? Because when I try to log into the Members Section in their forum with the account I used to purchase the Level-D 767 it says that it is invalid. I used this account to purchase the aircraft. Thank you.
1.: I'm using the Level D checklists, and by the turns on them, I should switch the demand hydraulic pumps to auto in the before start checklist. You turned them to auto after start, are you using different checklists?
2.: Isnt the APU bleed switch left always on on normal operations?
3.: Are you using André Folkers VC modifications?
I swapped the audio file for 'cabin secured' default sound that comes with leveld, So as soon as you start taxing, the call button will automatically light up, you press it, and the audio file plays. Same thing for the "can we close the doors captain" audio. switch it to whatever you like and voila!
when your in the cockpit and you look around it looks fast when i look around in my cockpit its like slow and laggy. was it normally like that when you installed the level-d or did you like switch a seeting to make it faster??
Not sure, sounds like a shader problem. I dont use FSX, and I don't run 8 series graphic cards. hehe, got no time to monitor heating conditions, and computer core performance.. I just want to FLY on max setings in FS2004! LONG LIVE FS2004!!!
Hey, I've been wondering, did you change anything in the VC? Because it seems more realistic. For example the panel lights etc. Ive been flying the 767 for a while now and i can see that your panel is different.
Answer part 1 ok, so assuming no FMC data in the computer and we're flying manually. YOu just took off and still climbing. If you press the autopilot, first thing that will happen is it will try to maintain the current verticle speed AND bank. Pressing the hold button under the heading knob will force it to maintain the CURRENT heading that it was when you pressed the button. However, if you want it to maintain hwat's in the heading window, press the "sel" in the center of the heading knob.
Answer part 2. So now it will maintain the heading you put in the heading window. Now for altitude. If you press the alt hold button, it will try to go back to the altitude it was at when you pressed the button, not what's in the window. To make it climb to your selected altitude you can do two things. 1. Set a verticle speed that will allow it to capture the altitude in your window, once it gets there it will hold that altitude. 2. press the FLCH button, and what it will do is....
answer part 3, it will go to the altitude in the window, while maintaining the current spped that is in the speed window. This is not a very detailed description of the full capabilities of the Automatics, but it goes to show you that by just pushing the Autopilot button , the plane will only maintain the current bank if it's more than 5 or so degrees (otherwise it will just level the wings), and it will maitain the current verticle speed you were at when you pressed the button.
final answer number 4, so in conclusion, press autopilot button, then press hdg sel button (the black button in middle of knob) to go to your heading, then selec a verticle speed that will allow the plane to reach the altutude you want and press the verticle hold button, and it should do as told. Definitly learn how to use the FMC which will handle all of that automatically. I'd be glad to help.
If you still want to give it a try, maybe I can help. Whatever the probelm is, it's surely a procedure you're leaving out. The Autopilot isn't much like the PMDG747 or any other autopilot, especially the default one.
Hi and thanks. I don't know much about repaints. I got that one off of the Levedimsim site and followed the instructions, I don't remember where I put the files though. Go to the Leveldsim site and there are a bunch of people who would be more than happy to help you out.
Nice tutorial video. The problem it was recorded in Virtual cockpit and you can not see too much because of quality of the video. Maybe it would be better to show it with 2D Cockpit. But still 4 Stars! Thank you!
Hey! Great Video! Nice VC textures! Seems like everyone is trying to download them from L/D forum, but they're not beeing succesfull.... could you upload it somewhere for us ? PLEASEEEEEEEEEE XD ??????
Hi chawki, unfortunatly I can not upload these textures without permission from LDS which I doubt I'd get! I'm not too sure why anyone would have a problem downloading it from the web site.
It's just a picture image. Not a real weather radar. This is fine though, becuase airlines had to special order weather radars for their 767-300 planes. Most of the 76-3's did not have the weather radar.
What was the aircraft and scenery?
dodginthis 10 months ago
6DOF is soo cool
Pwnzistor 1 year ago
I stopped watching this after a couple of minutes. There is no narrative as to what he's doing.
Nunsweepit421 1 year ago
How did you get the cabin announcments ?
andyquez 1 year ago
Level-D add-on is awesome!
More so when use in conjunction with another voice control addon called "Multi Crew Experience"(for which you can download a free demo). Just give voice commands, and the virtual co-pilot executes. In addition, you can talk to native FSX or FS9 ATC or even radar Contact ATC using your headset.
bigsparrow1 1 year ago
Too bad you have gone to all this work and there is no sound to tell us what you are doing.
Randarino 1 year ago
are you using a motion tracker?
mohamedmsg 1 year ago
This has been flagged as spam show
Level-D 767 is awesome.
But you can make it even better with something called "Multi Crew Experience"
Just google it up, LOL!
johnfoster187 2 years ago
PFD man, where'd you get it?
tomtimex 2 years ago
when u were entering the route, "KSFOKLAX"
then u posted it in the coroute and then set the runway # then press activate and then the execute button, i did the same but when i press the activate bullet, it does not do anything. the execute button does not light up.
PLZ HELP!!!!!!!
thanks
P.S. thank for ur response for the sound!!!!!
:D
sasvarp001 2 years ago
KSFOKLAX is a route that I created in FSbuild flight planning program, it saved it as KSFOKLAX. If you don't have a route programmed in that name, it won't work. Basically I was typing the name of the file that my plan was saved as. You have to do this as well, OR enter the route manually in the FMC by entering the From and To airports and the runway, then press Exec. You will then have to put in the route points in the legs page.
manbird12000 2 years ago
so all u do is make the flight plan and click save flight plan and for the title u write KSFOKLAX ???
sasvarp001 2 years ago
Yes you can do that within the simulator. Or just use an outside flight planning program to do it. But you're right, it's just the title of the flightplan file I'm using here.
manbird12000 2 years ago
@manbird12000 One should not post 'Level D' for anything that has to do with FS. Level for the FAA means amongst other things that the pilot can be blinded by the sun(simulated in FS) and 6 degrees of freedom motion rig(this FS does not simulate or PIC767 anyway)
2OQP 1 year ago
Can someone please send me the Andre Folkers VC Textures? Because when I try to log into the Members Section in their forum with the account I used to purchase the Level-D 767 it says that it is invalid. I used this account to purchase the aircraft. Thank you.
mrhomerjaysimpson 2 years ago
Same here and even once you buy you still need something more to ge full forums acess, why I have no clue, we bought it and should be able too.
RStickMan22 2 years ago
Very nice and helpfull video! But some questions:
1.: I'm using the Level D checklists, and by the turns on them, I should switch the demand hydraulic pumps to auto in the before start checklist. You turned them to auto after start, are you using different checklists?
2.: Isnt the APU bleed switch left always on on normal operations?
3.: Are you using André Folkers VC modifications?
Moechtegernpilot 2 years ago
uhmm im looking for graphic cards.
is this a good one PNY - NVIDIA GeForce 9600 GT 512MB PCI Express Graphics Card
policecrownvictoria 3 years ago
I just bought that one myself. It's awesome I think for the money. It's tons faster than the card i used to make this video.
manbird12000 3 years ago
ohhh ok koool.
thanx alot your awesome lol
great videos.
can you make a flight sim video of a 767 lot polish airlines from newark nj to warsaw poland?? That would be a great video.
policecrownvictoria 3 years ago
how did you get the flight attendent talking to the passengers.?
is there a button that you press or something?? i like it,
policecrownvictoria 3 years ago
I swapped the audio file for 'cabin secured' default sound that comes with leveld, So as soon as you start taxing, the call button will automatically light up, you press it, and the audio file plays. Same thing for the "can we close the doors captain" audio. switch it to whatever you like and voila!
manbird12000 3 years ago
what do you mean switching the audio file?
ausair007 2 years ago
how do u get the fight attendant to talk to the passangers because i don't understand what ur comment says.
What files do we have swap???
PLZ TELL ME
OR PLZ REPLY!!!!!!!!!!
Many thanks!!!!
Great vid :D
sasvarp001 2 years ago
yeahh how can i get it ??
it looks amazing.
policecrownvictoria 3 years ago
it's at naturalpoint, it's not too expensive. check it out.
manbird12000 3 years ago
OHHH WOW.
when your in the cockpit and you look around it looks fast when i look around in my cockpit its like slow and laggy. was it normally like that when you installed the level-d or did you like switch a seeting to make it faster??
policecrownvictoria 3 years ago
You're probably noticing my TrackIR, using the default scroll keys it's always a little laggy.
manbird12000 3 years ago
omg great video...
what kind of graphics card do you have because i have the level-d and my graphics card is nvidia geforce 6150 le and it sucksss
policecrownvictoria 3 years ago
wow, that is a pretty low end card. I was using a nvidea 7900 for this one. maybe even a 7600. Those go for about 60 bucks nowadays, maybe cheaper.
manbird12000 3 years ago
how did you get the boarding call? does it come with the level d sim?
united39 3 years ago
ya it included
filipinoboy147 3 years ago
where I can get the WXR merge?
regards
curimedia 3 years ago
are those weather radars actually working? if so, can you tell me how to make them work plz?
great vid!!
lixbeyond 3 years ago
Thanks. Radar is fake though. :/
manbird12000 3 years ago
U look like u know what ur doing
cookiemonster0626 3 years ago
hoe did you get those flight attendants voices??
tomtimex 3 years ago
how did u install the VC mod?
I tried over and over again with no success, and im sure i followed instructions correctly.
can you plz help?
great vid and thanks!
JotageHagemann 3 years ago
It was a long time ago, but remember to install it under each livery that you have otherwise it won't work.
manbird12000 3 years ago
hi manbird i have this plant on fsx/vista and when it rains the windshield goes grey? how can i stop it?
Galltrial 3 years ago
Not sure, sounds like a shader problem. I dont use FSX, and I don't run 8 series graphic cards. hehe, got no time to monitor heating conditions, and computer core performance.. I just want to FLY on max setings in FS2004! LONG LIVE FS2004!!!
manbird12000 3 years ago
init mate, good vid
Tescok 3 years ago
hi im really confused because i dont know how to install First Chice liveries ETC.Could you please tell me how to do this
Thomsonfly93 3 years ago
Hey, I've been wondering, did you change anything in the VC? Because it seems more realistic. For example the panel lights etc. Ive been flying the 767 for a while now and i can see that your panel is different.
Great video!
best regards
maksiopilot 3 years ago
yea but how do you get them on the repaint kit for e they juss download and then i get an error message
treynukka 3 years ago
were did you get the different liveries
treynukka 3 years ago
leveldsim website has them you can download.
manbird12000 3 years ago
where did you get the british accent
vincentongige 3 years ago
it came with the FStraffic addon I had at the time i think.
manbird12000 3 years ago
how did u get that weather radar near those FMC's? i dont have it
azkodagama 3 years ago
it's just an image, it's Andres's repaint. You can google it and download it.
manbird12000 3 years ago
oh ok thanks
azkodagama 3 years ago
sorry about posting again, but i tried to find it but, i cant find it for some reason, can u please give me the link?
azkodagama 3 years ago
it's at the leveld sim site, I haven't been there in a while, but someone should be able to point you to the link.
manbird12000 3 years ago
oh all right thanks :)
azkodagama 3 years ago
thank you so much, i love level-d now :)
Taydrum 3 years ago
No problem taydrum, I hope it helps and let me know if you have any problems, I'd be glad to help.
manbird12000 3 years ago
thanks, whenever I try to engage the autopilot, the altitude and heading hold never work. They indicate that they function, but never respond.
Taydrum 3 years ago
Answer part 1 ok, so assuming no FMC data in the computer and we're flying manually. YOu just took off and still climbing. If you press the autopilot, first thing that will happen is it will try to maintain the current verticle speed AND bank. Pressing the hold button under the heading knob will force it to maintain the CURRENT heading that it was when you pressed the button. However, if you want it to maintain hwat's in the heading window, press the "sel" in the center of the heading knob.
manbird12000 3 years ago
Answer part 2. So now it will maintain the heading you put in the heading window. Now for altitude. If you press the alt hold button, it will try to go back to the altitude it was at when you pressed the button, not what's in the window. To make it climb to your selected altitude you can do two things. 1. Set a verticle speed that will allow it to capture the altitude in your window, once it gets there it will hold that altitude. 2. press the FLCH button, and what it will do is....
manbird12000 3 years ago
answer part 3, it will go to the altitude in the window, while maintaining the current spped that is in the speed window. This is not a very detailed description of the full capabilities of the Automatics, but it goes to show you that by just pushing the Autopilot button , the plane will only maintain the current bank if it's more than 5 or so degrees (otherwise it will just level the wings), and it will maitain the current verticle speed you were at when you pressed the button.
manbird12000 3 years ago
final answer number 4, so in conclusion, press autopilot button, then press hdg sel button (the black button in middle of knob) to go to your heading, then selec a verticle speed that will allow the plane to reach the altutude you want and press the verticle hold button, and it should do as told. Definitly learn how to use the FMC which will handle all of that automatically. I'd be glad to help.
manbird12000 3 years ago
ya but it was installed correctly and successfully, but the autopilot just never responds... :(
Taydrum 3 years ago
If you still want to give it a try, maybe I can help. Whatever the probelm is, it's surely a procedure you're leaving out. The Autopilot isn't much like the PMDG747 or any other autopilot, especially the default one.
manbird12000 3 years ago
sorry but i think level-d is shit... just my opinion, everything functions, but the guages like autopilot never work.... :(
Taydrum 3 years ago
That's simply because you don't know how to use it OR your installation has errors in it. The LevelD systems works excellently.
manbird12000 3 years ago
i agreee i love this plane
shortkid97 3 years ago
Level D is the best!! ; ) Great video also!
colesy93 3 years ago 2
ver nice viseo 4 out of 5
octosh 3 years ago
This would have been a 5 out of 5 tutorial if we had a voice over explaining what you were doing.
We give it a 2 out of 5 :( for lack of a voice over.
How am I supposed to understand why and what you are doing?
Are we not worthy of a voice over?
SirWoofer55 3 years ago
hehe, More like I wasn't worthy of a voice over. I hate my voice on the microphone!
manbird12000 3 years ago
hey what liveries come with the level d 767
o and even if u buy the disk do u have to download the livereis??
bata9955 3 years ago
can u also put a tutorial how to put on repaint or pm me about it? thx loves the vid
aircanadapilotz 3 years ago
Hi and thanks. I don't know much about repaints. I got that one off of the Levedimsim site and followed the instructions, I don't remember where I put the files though. Go to the Leveldsim site and there are a bunch of people who would be more than happy to help you out.
manbird12000 3 years ago
my repaint manager wont open up for me...now im thinking if its a waste of money lol
aircanadapilotz 3 years ago
Nice tutorial video. The problem it was recorded in Virtual cockpit and you can not see too much because of quality of the video. Maybe it would be better to show it with 2D Cockpit. But still 4 Stars! Thank you!
tsgucci 3 years ago
Hi tsgucci, I guess it could be called a tutorial
manbird12000 3 years ago
awesome!
dnanban 4 years ago
Hey! Great Video! Nice VC textures! Seems like everyone is trying to download them from L/D forum, but they're not beeing succesfull.... could you upload it somewhere for us ? PLEASEEEEEEEEEE XD ??????
chawki 4 years ago
Hi chawki, unfortunatly I can not upload these textures without permission from LDS which I doubt I'd get! I'm not too sure why anyone would have a problem downloading it from the web site.
manbird12000 4 years ago
Yepp, it's called pirating if you give out textures, just saying...
xenycexvlad 4 years ago
Man i want the cockpit to work, like yours
hyyz 4 years ago
wut modificatons did u add to ur 767?
lebjam131 4 years ago
I just replaced a few sound files and I have the VC mod which adds a little weathering to the panels.
manbird12000 4 years ago
is it actual weather or is it just a picture that doesnt move? ive heard about it, where can you download it i cant find it anywhere
vickfan24707 3 years ago
talkin bought the vc texture, it wouldnt let me do reply to yours for some reason
vickfan24707 3 years ago
It's just a picture image. Not a real weather radar. This is fine though, becuase airlines had to special order weather radars for their 767-300 planes. Most of the 76-3's did not have the weather radar.
manbird12000 3 years ago
hi is this fs9 or fsx n r the announcements standard?
lebjam131 4 years ago
This is FS9. The default wav files for the cockpit announcements were replaced with these.
manbird12000 4 years ago
I used Just flight's traffic 2005, and I think that was flytampa KSFO.
manbird12000 4 years ago
What addons have u used ??
CessnaFlight92 4 years ago
Hey great video! Can you send me you profile for TrackIR that you used for this vid? Its perfect...
Thanks
cargoa45 4 years ago
were di u get the atc accents from
shep2k7 4 years ago
OK, What are your system Specs? you must be getting like 40fps at least in the VC there which is very commmendable
fjshepherd93 4 years ago
Just 22 fps.
manbird12000 4 years ago
Hi,
I noticed that in your Level D 767 there is a weather radar installed.
Is this weather radar an addon and if so, how did you get it?
Also, do you use any special cockpit textures for the panels etc in your 767?
BTW great videos !!!
zap737 4 years ago
Hi, thanks! The radar is just a bitmap image, the cockpit texture is from the leveld website, I forgot the name, but someone repainted it.
manbird12000 4 years ago
hi manbird 12000,
i have seen these nice VC textures from you and i think they looks like real.
I wanted to download them from leveldsim, but i have some problems with logging-in, so my question is...
can you pleeeeease send these textures to me?!
when possible to derlimomann@aol.***
the *** is a COM , because its not allowed to post e-mail adresses :D
I would be really happy
Thanks
Chris
edmfflyer 4 years ago
I noticed that in your Level D 767 you have a weather radar installed. Is this an addon? If so, where did you get it?
Also, do use any special cockpit textures etc for your Level D 767 gauges and panels?
BTW great Videos !!!
zap737 4 years ago
How can u move the camera like u do?
m1r3o 4 years ago
It's the TrackIR head tracker.
manbird12000 4 years ago