Magnetic Vortex Electrical Generator

[asteroceras]

It sucks that people have to know "true physics" to understand basic thermodynamics. That must be why we have failed to create space travel, nuclear power, microprocessor technology and the internet. Fortunately, it has allowed us all to have unlimited power from little boxes of magnets that people spend lots of money on then leave in a drawer in their garage after a couple of years and forget about.

[InscrutableOutlander]

try it with Cymatics



[TheJobiwon]

DePalma did not invent the N-machine, as is popularly believed, at least not one that worked. He was allowed to help with the project, but only after the core had already been built. As far as I know he never succeeded in building one on his own as he did not know the details of the core. N-machine was a name that DePalma used to refer to generators of that type, but it is not what the actual inventors called the one that worked.

[virgojeep1]

So have you achieved an anomaly point yet with this tech? From what I am observing it seems like your putting more energy in than what you would get out. Plus the compression and acceleration of the magnetic field is limited by the rpm of the device. How does this device allow for multiplication of the phase velocities of the energy being created?

[BPinard]

You guys are all nuts.

[ilav1m8y]

The gist the compensation coils operation is simple, you just look at the magnetic feild of the rotating copper disc as the current takes the shortest path from - center to the + outter rim, at a 90 degree angle to current flow. Now if you look at the magnetic feild of the outer compensation coil "0" the magnetic field is at a 90 degree angle.Those magnetic feilds intersect and cancel each other out, the KEY to the N machines operation is to put the energy taken recycled back into the N machine.

[spiritelemental]

@ilav1m8y Please define what you mean by compensation coils. What do they look like? How many of them? Where are they located? What size are they? Where is some public information about them? etc... Thanks!!

[ilav1m8y]

I'd built a model N Machine about 11 years ago, mine was just a toy motor with a plastic planetary gear I got as a $35. kit with 4 Neodymium Iron Boron Magnets about 6CM across with a Kabab and 2 copper plates. The key to it is the outer compensation field which uses Bloch Walls N/S-N/S with outer compensation coil S/N-S/N that is equal in amplitude and opposite in sign. I'd got more than 100% efficiency using the compensation coils

This is the simplest OU, don't tell anyone if you build it

[XTheSonofTheSunX]

it's always nice when you view something, that inspires, and rattles your ball sack, at the same time....

[Lissica1]

God i love this nonsense. Free Energy Lol. 

[Anothercoilgun]

The skeptics are pathetic.

[gbgk420]

So this is what u do after work lol

[Heavyarmskai2000]

Lol retarded no such thing and magnetic fields move electrons they do not provide power from nothing.

[iHeartElectricalEng]

Dude, the website that you post as an explanation uses words that don't even exist. the dictionary doesn't even list "streptation." just look, it's underlined in red as I'm writing it.

The Faraday disk is a homopolar generator, not some magical over-unity device. We know how it works and the physics governing it. Oh and just fyi, for your "absurdity" website, Inertia applies to fucking everything, not just still objects.

[ilav1m8y]

@iHeartElectricalEng "Streptation" just means rotating, Tesla describes rotating magnetic fields which are also known as streptation fields which just means rotating fields. The thing thats interesting about this device is the solid state applications of this using reletivity where you'd get inertial effects just from rotating the XY plane of the magnetic field. I even suspect that a voltage/frequency field driven solid state N machine with no moving parts should also be possible.

[dollywarrior]

5 to1 is exatly what wee more energy coming from less energy in order to get free energy

[inertialcapacity]

What we need is new theory. Then based on new theory we invent better products. The truth is the FMMC meter measures Conductance =I/V. Take this and develop the basic DC electrical theory all over again and see what develops -- its fascinating stuff and develops the mental powers. One rule though: the meter ONLY measures the one thing and cant measure something else in parallel -- whic is normal logic isnt it? As for over unity, consider Coral Castle Florida Keys:per.motion machine.

[iHeartElectricalEng]

@inertialcapacity a new theory of what, exactly? and what about DC needs to be changed? This device does nothing. .... lol.. mental powers...

[sexybuttox]

You suck!!!!!!!!!!!!!!!!!

[tzkelley]

Wow, that's amazing. Hook a few of these in series and power the whole world. Or, hook it to itself and watch it blow itself apart--that would be interesting.

[morganhv]

And the point of that video was what?

[kurisu925]

A guy makes a video of a motor spinning with a volt meter that he does not measure any thing with and all of you think he has created over unity. Bravo thats a new level of stupidity. Hey every one apparently all you need to generate electricity is to turn on a motor.

[STiELzephyr]

everyone look up the 'STEORN' motor on display in dublin prooving overunity with replications shwoing the no cemf on the rotor !!!!

also look up the 'rodin coil' !!

THANKS FOR THE VIDEO , KEEP GOING !

[iHeartElectricalEng]

@STiELzephyr the steorn motor does nothing. It failed to function at his first public showing and during the second, it was powered by a battery and did not produce more power that it was using. His claims were found the be fraudulent in June 2009. So stop posting bullshit like this and get a degree in something.

[sn1pe352]

I like your style and work, you definitely seem to understand what's going on. Check out my videos if you find time

[MattBlytheTheOne]

I think the coils of wire need to cut the magnetic field lines at right angles, also try it with a brushless motor they have a lot less friction and "noise" remember the voltage you will be getting will be an AC signal essentially, the length of wire is not important it is the number of turns on the coil.... hope this helps :)

[QuantumCarl]

Do you have a brother or know someone named Nick?

[MattBlytheTheOne]

NO :)

[QuantumCarl]

...Serious?

[MattBlytheTheOne]

lol YES!

[spiritelemental]

Adam Trombly built a working free energy machine based upon a similar concept as Bruce Depalmas N - Machine, as far as I know.

[overunitydotcom]

N-Machines don´t work.

They are just inducing the current inside the pickup wire...

Come to overunityDOTcom to find better principles.

Regards, Stefan.

[spiritelemental]

AdminOnDuty, Ah, thank you for that! I see youve already seen for yourself this phenomenon of a magnetic field that operates independent of the iron that holds it. Please take a look at my video of the Improved Magnetic Vortex Electrical Generator. I havent been able to get it to produce much electricity yet. I have also modified it by attaching a special copper disc to it which I have a picture of at my website at the very bottom of the inventions page. So what am I doing wrong?

[spiritelemental]

I have 2 pancake coils almost 3 inches across attached to the permanent magnet and with about 12 meters of copper wire in it. I also have the spiral copper disc I built attached to the coil, and I am using the copper pick up arms (brushes) of a couple of small electric motors. I even fed the voltage produced threw a transformer in hopes that I could read a higher voltage with my meter, but to no avail. Is my meter not sensitive enough? I am so close, but Im missing something. Can you help me?

[OverUnity7734]

The research I have seen and agree with is that heat = energy. Applying a magnetic field to metal then dropping the field and repeating causes push pull on the metal - friction - heat. Thus energy is lost due to heat. I have seen (google) but not tried a black powder that can be obtained by sifting sandy soil over a magnet.

The black powder is made cohesive via an epoxy and is then used to concentrate the electromagnetic fields with out heating. No energy loss due to heat. Hope my 2cents helps.

[mcskifter]

What you are describing is very low grade iron ferrite. Get some decent stuff pre-formed from any electronics supplier, used for choke cores, transformer cores, a pretty much anywhere a magnetic field needs to be altered. This is 100+ year old technology.

[AdminOnDuty]

It is my understanding that both Faraday and De Palma recongnized that the power load was not transfered back to the generator as negative torque, but instead as the generator is loaded the output is reduced. This principle is based on fixed field theory. You can see the fixed field using a magnet and an old working CRT. Point a pole face parallel to the CRT glass and rotate it on magnetic axis. You will notice that the pattern on the screen does not rotate with the magnet.

[AdminOnDuty]

Adding coils helps, but De Palma understood the gain advantage of increasing diameter. IIRC, the increase is to the order of the 4th power while the load is only increased to the square. IOW, the bigger the diameter the better the performance. So a large flat disc would perform better than a narrow long coil of the same copper content. Then stacking the plate magnet combinations increases overall production. The secret is in the wet brushes. Use very low cohesive conductive fluid. gases=fluid ;)

[spiritelemental]

His site is project - earth - dot - com.

[spiritelemental]

Adam Trombly has built free energy machines based upon a very similar concept.

[spiritelemental]

disturbedone5009 The conservation of energy theory is incorrect. Energy can be created out of nothing. People fail to understand what exists in empty space. Ether exists everywhere and it is what all energy is made out of and comes from. The truth physics has been suppressed and hidden for a very long time. Tesla created a free energy device in 1886 and yet, well over 100 years later most people havent heard of this.

[blqkvo]

true but Ether cannot be measured or used simply because it is everywhere and you cant find a point of low potential of Ether. That`s why we cant make E from nothing practically. In theory we can.

[spiritelemental]

Hi ibblecabibble. If you or anyone else is interested, I have an improved version of this device that Ive already built. I havent posted a video of the new device because I want to get it producing more electricity first. Just go to the bottom of the inventions page of my website to see a couple pictures of the improved model.

[disturbedone5009]

if the magnetic field is making up for the lost energy by pulling it out of the air wouldnt that break the conservation of energy theory by creating energy from nothing?

[ibblecabibble]

Yes and no. The question here woulod be if this experiment can be reproduced by many different people and not just be a single one shot fluke. However, if it can be demonstrated by several different people then there is obviosly something happening that we cannot account for with present modes of understanding. There for you would expand or evolve the older view and try and account for this energy that obviously exists due to repeated reprouction of its effects.

[disturbedone5009]

ok yeah i get you.

[UnderMan1965]

this video showed nothing. a spinning motor externally powered. No electricity shown. Didn't even show the meter readings.

Please explain Psion flux better. Oh, by the way nobody said anything anywhere that fuel, such as a candle or gasoline, has latent heat. I don't know where you got that idea. It's a chemical change occurring that gives off heat, light, and energy. Not "latent heat". That's the dark ages theory.

[sirmikeydotcom]

Anyone tried splitting water into hydrogen via the free energy 60 volt telephone wires? Could also do it with this free energy:

/watch?v=Kdup42Epq0o&feature=e­mail

[TheWiccanBitch]

why did you delete all the comments that refuted your claims?

[spiritelemental]

Thanks. I was going to make a larger coil, but I hadnt thought of using a smaller guage wire, but that makes perfect sense. The finer the wire the better I think... In the video Im using green wire I bought from Radio shack for the coil.

[crob227]

ten meters, and the smallest gauge wire, it should give you a good amount of volts, and then maybe use a transformer.