1997 Acura Integra GS-R - Church Automotive Dyno Tuning - Button Willow 13CW - 2:09

[TheTurbogsr]

is that your DD car?

[naboba]

@TheTurbogsr  nope , I have a E60 as a daily.

[speeddemon157mph]

I feel like a bitch for playing need for speed...

[92Demr]

-3 ^_^

[TheTurbogsr]

do you still have your ps?

[naboba]

@TheTurbogsr  nope.

[DcEvoIX]

nice build man kinda makes me want to do something like this I always have boosted cars but this car looks like alot of fun and I do want something a little more reliable since I drive like this on a daily basis so atleast there will be a little less maintenance and I can sacrifice a little weight and keep my a/c ;-)

[KONGZILLAGOD1]

at least you use the car where , and what it was intended for . bravo . great driving . im sold time to get a integra

[laospot]

i watch this video over and over and over .. .

[da73]

great driving, much respect!

[happa13]

nicely done. i love watching a fellow integra driver do work at buttonwillow.

fast driver+fast car... haha, those s2k's have nothing on you! did you and that last white integra battle it out for a while? I wanted to see the rest of that first session's video!

[ltlocus]

red teg sounds gooooood

[MrFreshDougie]

some good fuckin drive right there

[iownahatchback]

anything done to the trans?

[naboba]

@iownahatchback

transmission : 2000 civic si tranny carbon tech synchros quaife lsd 4.7 jspec itr final drive

[xxOMAR313xx]

$7,000 on the engine......He was gonna get a 07 gt. but then he changed his mind and tunned a eg.

[HondaRalph]

dang beating subaru's, and 350z's miatas, bmw's s2000's ha!

[fastvtec]

look like alot of fun i feel the tegra's blowing everything out the water

[bongborin]

Great job with the driving!!!

What is the springs rate you run for front and back?

[420witchdoctor]

Hell yeah, this is what Hondas and Acuras are meant to do, road race. Not drag race. I hate people who destroy sick ass Hondas on a drag track.

[xxOMAR313xx]

@420witchdoctor Not all hondas lose in a drag race. my friends k20 turbo eg runs 10s

[420witchdoctor]

@xxOMAR313xx And how much money did he dump into it?

[toyotaham1]

Hey what type of sway bar set up do you have also corner weights and ride height i just picked up a dc2 and wanna set up for hpde nice ride *******

[naboba]

@toyotaham1

Thanks , I have not corner balanced the car yet. The rear sway bar is a comptech set up , the front is stock.

[TheHondajdm]

clean ass video...

upload more. thatz fun were is it located at???

[egycasper]

can you send a vedio of the car accleration in the cluster

[egycasper]

does the s2pro2 works good with the i.8L and 11.2:1 cr ?

can you send a video on your cluster acceleration.

[naboba]

@egycasper works out fine. you would want the pro 3's for something higher , like high 11's or in 12 + cr's.

[egycasper]

Respond to this video...

[naboba]

@egycasper

about 11.2 now

[egycasper]

nice....what is the engine compression ratio?

[zlee415]

ahh the multi colored need a solid paint job exterior is ugly as hell, but the engine is sweet so its not a ricer. I think once your completely done fixing it up its gonna look amazing, and run just as good.

[naboba]

@zlee415 it's already done.

[zlee415]

@naboba Is it done in this video? If in the video is the finished product I say paint it one solid color. If this is kinda old, and your car already is painted solid i'll find out hopefully by watching some other videos of yours.

[naboba]

@zlee415 the picture in the back round of my channel is the current state.

[naboba]

@zlee415 click on my name to view the channel.

[7racer]

nice...how you liking the pro2 cams? thinkin of gettin them myself.

[nelson9995]

im surprised these motors hold that long without blowing or anything... and no im not bashing I own a gsr

[SupaviIIin]

nice.. Great driving!

[Dc2180]

Car sounds amazing dude

[naboba]

thanks supa and dc2180.

=D

[itsjussjerry]

stock head as in stock PORT head correct??!

[naboba]

yes sir

[PumperThumper]

Nice trackcar mate- Evilscotsman

[tamusbaby]

Awesome video!!!!!!! Car sounds great!!!!

[shawn5914]

that dude in the white acura needs to learn the benefits of downshifting

[adevney]

Nice driving. Looks like a lot of fun. I've only autocrossed but went to ITR Expo last year and rode along a little bit.

[ferrarif50f1]

I have a 97 GSR too with supercharger I'm getting it ready for the track... I'm a Nitto dealer if you need nt01 or nt05 give me a call (909) 620-0606 My name is Damien

[naboba]

sounds good man , calling!

[ferrarif50f1]

we can beat discount tire directs price by 10 or so dollars per tire... give me a call

[naboba]

I hear ya!

[BLACKANIMALRIDER]

ooo and i like the fact that u didnt add annoying music playing over the hole video

[BLACKANIMALRIDER]

man, amazing driving props to you

[GFunkCSU]

nice video. I've always admired your car. Great driving!

[nocbl2]

Wow great lines! I'm literally doing the same motor build to my GSR right now, but I still have the GSR tranny. Cool to see how much power you pulled out of it. Who tuned it?

This is a great vid. Now I can't wait to get back to Button at the end of the month!

[naboba]

Thanks!

The car was tuned at chruch automotive testing and the current block is the JDM ITR block with a gsr head and skunk pro 2 cams.

[spoontuner]

you shouldve passed him up at the turn o 2:20

[95db8r]

nice vid sick gsr

[TheY0ungTurds]

a jeep beating a gsr lmao thanks for the laugh. when I owned a gsr i ran 14.6 with just i/h/e tune

[naboba]

lol he was just joking! =D

[pinky11]

buttonwillow is such a fun track to drive on, nice vid!

[kongthoj87]

sick car... is all that is said in the description all that you have...? if so wow... i wish my similar build didn't blow up so mines would be just as sick as yours! lol!

[naboba]

thanks kong !! the build in this video was a usdm gsr block. uspec itr pistons 0A pro 2 cams skunk cam gears skunk intake manifold dtr header chrome p28 ecu . church tuned __________________________ transmission : 2000 civic si tranny carbon tech synchros quaife lsd 4.7 jspec itr final drive

[KungPao916]

What whp did you dyno'd at? I'm guessin 205-215? Vtec is loud!

[naboba]

thanks Kung -

It put down 219 with 147 lb tq

no head work , stock block

[koofoolz]

@naboba i read your article in honda tuning, much props man. it says 219hp at the hubs, would there be a difference in whp? how much would be loss?

[naboba]

@koofoolz thanks man ~

the car can do 200hp on the rollers.

[koofoolz]

@naboba nice man. you should take it on the 1/4 mile just to see what it runs. cheers.

[naboba]

@koofoolz I wouldn't mind going back in time to the days of cut doors all slicked up. lol

[knmband3]

Beast bitch.

[jollywhitegiant]

Beast. i hope to get a tunner soon, then slowly get it track ready.

[genecide425]

Love this video. I cant wait till I go again to BW on the end of the month.Go to the track w/ us Reza. May 30. Organizer is speedventures. What kinda tires where you on btw? thanks. HT SN 98itRspec. :D

[skirton22s]

Nice drving bro

[naboba]

thanks guys!!

[iLOVESTIs]

great video *****

[lsvtec91]

Nice mirror.

[naboba]

it works.

[lsvtec91]

Yeah I got one too

[novalogick]

my jeep would smoke your acura reza ^_^...wahahah

[naboba]

it probably could , hahahaha!

[BACKDRAFT2009]

the sound is like a nice melody to any lover of a japanese vehicle.... love it!!

[DTAILSPLS]

dope set up u got there...im going to need some hints later. damn, ur shits got hella midrange power, love it. nice video too. Ta:ls

[tfarol]

Reza! SUp foo Its Timmy. Prob dont remember me. Knew you backin the day when you had the Killer bee! Peace!

[naboba]

sup timmy man ! how are you , long time no talk bro!

[jdmxdb8]

Thanks for the quick reply. Hopefully I'll see you on the track sometime. Don't see too many Integras at the track anymore.

[jdmxdb8]

What kind of exhaust setup are you running?

[naboba]

JUN cat back exhaust

[RCkid8]

nice! do you know the hp of the integra (stock hp)

[naboba]

depends on what dyno your using.

I would say around 165ish...

[cleanrice]

DAMN Rez you've been doin some work! Great to see her still in action man, that new front end and fenders look aggressive as hell. Nice driving, I really enjoyed the video...keepin the B alive and KILLIN some F20's hahahaha!!

[naboba]

thanks for the kind words cleanrice =-

[projectDC4]

got more pics of your interior? i noticed you didnt have a rear view mirror and i saw the mirror plates above your head..reminds me of my grandpa's old car lol

[naboba]

yeah those are some old school mirrors but they work , lol!

[projectDC4]

got inside pics of the setup? if so pm me

*goes and searches for HT for build threads*

[naboba]

search user name MANTIES on ht , there should be a thread with some interior pictures.

=D

[pvang07]

cool video man...i was wondering what mod u put in ur motor. Is it built internal? seems pretty quick for a gsr.

[naboba]

thanks~

yeah the motor had usdm itr pistons , the rest of the block was all stock gsr components. This motor acutally blew up this same day. I have a 98 itr block in the car now.

[jdmxdb8]

Great driving and amazing DC2. I have a DB8 that I also road race. I'm interested in your engine setup. And are you double clutching right before corner entry? It seems like you're not doing the conventional heel-and-toe downshifting. Good stuff man.

[naboba]

Thanks !!

some of these turns didn't require breaking so I would rev match it , the turns that required breaking is when I would heel toe. The double clutching sound might be the times I mis-shifted or didn't get into gear.

[jdmxdb8]

Ah I see... I think I was just miscalculating which gear you were on. Lol! Do you have a B16 or ITR tranny?

[rolapower]

2'09 is not bad, but you will see some fast s2000 drivers when you move up to advance group, who were the event host?

[naboba]

I believe this event was hosted by Redline , this was the intermediate group. Plan to run the advance group next time around to avoid traffic.

[eg6roll]

cool video. u just inspired me to go out and work on my teggy that's been down for 4 years.

[naboba]

that's cool you didn't sell it..

good luck man!

[lifesuxdie]

good stuff homie!

[seungyoo86]

wow nice machine and good driving.

but imo i think you could have made your turns wider on some of them, using more of the track, carrying more speed

[naboba]

yeh ,it was only my 3rd time there so I have A LOT to learn. I could have been in 5th gear in the wider high speed turns like riverside rather than being in 4th.

Just need some more seat time to correct these errors ...

Thanks~

[hndelsol26]

NICE!!!

[MurkY0u]

makes me love my gsr :)

[w119bjk]

nice man

[hmongvaj08]

nice vids dude. I'm thinking its a fully built motor!

[1JDMkidJoel]

Sweet vid I love hondas but those S2gays so slow!