@Harvz78 i made a mount the comes from the frame and raps around the bottom of the trans. the 4 link attaches to that mount for the front and rear. the springs are hpi 3" in front and 4" rear. i just bot them at the local hobbie store.
@JuniorPros118 ya i like the 1.9 because they look more relistic. i am using the new 1.55 o another project an they look spot on but with differant axles.
If that is what the size was than ok I am basing the motor size on my friends mountaineer and the motor on his is smaller the a 540 motor and his motor is the one that cam on the truck.
You are correct this not a bruiser it is the f350 it is a 1/10 scale truck that cost around $350. Where the bruiser is really more a 1/9 scale truck and when it came out was close to $480 and the bruiser has a smaller motor i'm not shure of the size but a 370 is smaller and the 540 is bigger. I will agree a rerelease of the bruiser would be nicer but tamiya gave use the high lift and hilux instead.
The frunt bumper alone was 5 hours. The biggest mod was moving the motor to the front lower part or the trans. The esc is the novak rooster krawler,integy 55t motor,and hpi shocks.
wow i thot this was a real truck lmfao
00s10xtreme00 1 year ago
what the f this is not my music for this vid.
runions79 1 year ago
You did a great job runions79 on that 4 link. I been thinking doing it on my high lift too.
How did you install the link on the chassis and what shock did you use on the rear?
I tried to look really close on the video how you did it under the chassis but it's not clear.
Harvz78 1 year ago
@Harvz78 i made a mount the comes from the frame and raps around the bottom of the trans. the 4 link attaches to that mount for the front and rear. the springs are hpi 3" in front and 4" rear. i just bot them at the local hobbie store.
runions79 1 year ago
needs 2.2 tires. but they wont fit right?
JuniorPros118 1 year ago
@JuniorPros118 ya i like the 1.9 because they look more relistic. i am using the new 1.55 o another project an they look spot on but with differant axles.
runions79 1 year ago
If that is what the size was than ok I am basing the motor size on my friends mountaineer and the motor on his is smaller the a 540 motor and his motor is the one that cam on the truck.
runions79 4 years ago
You are correct this not a bruiser it is the f350 it is a 1/10 scale truck that cost around $350. Where the bruiser is really more a 1/9 scale truck and when it came out was close to $480 and the bruiser has a smaller motor i'm not shure of the size but a 370 is smaller and the 540 is bigger. I will agree a rerelease of the bruiser would be nicer but tamiya gave use the high lift and hilux instead.
runions79 4 years ago
bruiser uses a huge motor. 740 type to be correct
hardcoretam 3 years ago
Love the flex!!
98snakeeater 4 years ago
were do u buy theses trucks please reply thanks
hockeyplaya1030 4 years ago
I have around 35 hours modifing the truck.
The frunt bumper alone was 5 hours. The biggest mod was moving the motor to the front lower part or the trans. The esc is the novak rooster krawler,integy 55t motor,and hpi shocks.
runions79 4 years ago
Dam thats pretty bad ass can i Ask how much you've put into it???
SPAZ59711 4 years ago