@1afrowolf thanks for watching, this barrel design works great. I've found that you may want to put the square holes a little bit higher up (maybe 1 inch higher than I did) so you don't have to dump the ash as often.
I do prefer to use cut off wheels and chisels for this type of thing though. Those Acetylene and Oxygen tanks are expensive to get filled. I try to save the gas for important things, or things i can't cut with grinders and chisels in general. I'm a cheap bastard...
do u cuss like that all the time.i dont no of many people who could be around it for very long.u would sound a lot smarter if u clean your mouyh up a little .and u didnt your job
@tatorbugist I do cuss that much, and I probably would sound smarter if I didn't. On the contrary, you'd look a hell of a lot smarter in the comments if you knew how to spell and punctuate whilst trying to tell me that i sound stupid. :)
@tatorbugist You might also want to note that "shit" is also considered a "cuss" word. I mention that as you seem to be adding it to your comments on other videos. DERP.
nice burnbarrel ,works well I LIKE "BURN BARRELS" the old sludge is just xtra fuel for the fire,@1:33 bet the grinder was a POS harbor frieght model, i installed a small electric fan on the bottom hole with a 2 foot long metal vent,its turbocharged
@outdoorsman310 I probbaly could but i'm not going to because i don't have the time and i don't have a use for it. but if you want to build one there are many vids here on YT about wood gasification
@outdoorsman310 I think you'd need a barrel within a barrel to make a dual walled barrel.
Make holes (or 1 hole if using a fan blower) at the bottom of the 'sides' of the outer barrel, small holes in the bottom of the sides of the inner barrel, and holes in the top of the 'sides' of the inner barrel. Angled down if possible so the flames 'flamethrower' the fuel and make it burn better.
Do you have any welding equipment? I don't have any but I'll tell you they work better with a good seal between the inner and outer barrels. Complete airtightness is not a requirement but get it as good as you can.
Air enters the holes at the bottom and travels up the side walls, drawing in smoke from the smaller holes in the burn pot.
The hot air/smoke mix comes out the top holes (and seal flaws) where it blows down into the pot and is ignited. The flames 'flame thrower' the fuel in the pot.
@tractorloverforlife9 after burning for a long time yes.. you can put them up a bit higher if you like but the idea is to dump the ash often. it burns much hotter when the ash is dumped
I love the air vents. I'm definitely going to take those into account when I finish mine. Thanks for the vid :)
1afrowolf 2 weeks ago
@1afrowolf thanks for watching, this barrel design works great. I've found that you may want to put the square holes a little bit higher up (maybe 1 inch higher than I did) so you don't have to dump the ash as often.
KrankieV2 2 weeks ago
lmfao.....at your spelling..."use caution WHILST using power tools" !
lluwd 2 weeks ago
@lluwd Whilst is a perfectly correct English word...
KrankieV2 2 weeks ago
@KrankieV2 ha ha ha, english how?? like england? or America...
lluwd 2 weeks ago
@lluwd it is part of the British dialect. Most of what I read is written in such a dialect, and so that's just how I write.
I even find myself typing "colour" at times...
KrankieV2 2 weeks ago
do yourself a favor and get a cutting torch.
seizetheweakened 3 weeks ago
@seizetheweakened I've actually got one now! :D
I do prefer to use cut off wheels and chisels for this type of thing though. Those Acetylene and Oxygen tanks are expensive to get filled. I try to save the gas for important things, or things i can't cut with grinders and chisels in general. I'm a cheap bastard...
KrankieV2 3 weeks ago
do u cuss like that all the time.i dont no of many people who could be around it for very long.u would sound a lot smarter if u clean your mouyh up a little .and u didnt your job
tatorbugist 3 weeks ago
@tatorbugist I do cuss that much, and I probably would sound smarter if I didn't. On the contrary, you'd look a hell of a lot smarter in the comments if you knew how to spell and punctuate whilst trying to tell me that i sound stupid. :)
KrankieV2 3 weeks ago
@tatorbugist You might also want to note that "shit" is also considered a "cuss" word. I mention that as you seem to be adding it to your comments on other videos. DERP.
1afrowolf 2 weeks ago
Warning! Fire is Dangerous. Put any highly flammable material In the barrel
welderboy14 3 weeks ago
@welderboy14 yeah there ya go lol i just put that disclaimer so i didn't violate any adsense rules ^^
KrankieV2 3 weeks ago
@KrankieV2 ah i see, Stupid legal Crap
welderboy14 3 weeks ago
Harbor freight tools....use once and broken.
Mlwtca 1 month ago
@Mlwtca that's just about right lol... sometimes you can use them a few times.. i usually don't buy their shit, generally not worth anyone's time
KrankieV2 1 month ago
nice burnbarrel ,works well I LIKE "BURN BARRELS" the old sludge is just xtra fuel for the fire,@1:33 bet the grinder was a POS harbor frieght model, i installed a small electric fan on the bottom hole with a 2 foot long metal vent,its turbocharged
daewooparts 2 months ago
@daewooparts absolutely correct it was a harbor freight cut off tool. JUNK it is!
thanks for the view and comment :)
KrankieV2 2 months ago
My neighbor used an old beer keg for his fire pit! looks good
racer4560 2 months ago
@racer4560 Beer Kegs can be made into all sorts of cool stuff. They make great fuel tanks too!
KrankieV2 2 months ago
"Warning: Fire is dangerous" - That just makes me want to do this MORE!! lol Great vid thumbs up!
SuperKONR 2 months ago
@SuperKONR go for it haha that's just there so i can keep ads on the video
KrankieV2 2 months ago
could you make a gasifier barrel?
outdoorsman310 3 months ago
@outdoorsman310 I probbaly could but i'm not going to because i don't have the time and i don't have a use for it. but if you want to build one there are many vids here on YT about wood gasification
KrankieV2 3 months ago
@outdoorsman310 I think you'd need a barrel within a barrel to make a dual walled barrel.
Make holes (or 1 hole if using a fan blower) at the bottom of the 'sides' of the outer barrel, small holes in the bottom of the sides of the inner barrel, and holes in the top of the 'sides' of the inner barrel. Angled down if possible so the flames 'flamethrower' the fuel and make it burn better.
TimpBizkit 2 weeks ago
@TimpBizkit i just need to find some empty barrels of the right size
outdoorsman310 2 weeks ago
Do you have any welding equipment? I don't have any but I'll tell you they work better with a good seal between the inner and outer barrels. Complete airtightness is not a requirement but get it as good as you can.
Air enters the holes at the bottom and travels up the side walls, drawing in smoke from the smaller holes in the burn pot.
The hot air/smoke mix comes out the top holes (and seal flaws) where it blows down into the pot and is ignited. The flames 'flame thrower' the fuel in the pot.
TimpBizkit 2 weeks ago
what happens if you stack two barrels on top of each other?
outdoorsman310 3 months ago
@outdoorsman310 not sure, I have never done that. I suppose if you cut the holes right you'd just have one giant barrel that burns the same way
KrankieV2 3 months ago
@KrankieV2 i thought it might have alot of updraft but it would probably be too unstable
outdoorsman310 3 months ago
Good job, I use a Stainless steel Washing machine drum, no need to worry about it rusting away!
HDXFH 4 months ago
u saw me do mine, yours looks better
FatGuyWithAKatana 4 months ago
wouldnt ash come out of the bottom square holes??? that thing is awesome!!!!
tractorloverforlife9 4 months ago
@tractorloverforlife9 after burning for a long time yes.. you can put them up a bit higher if you like but the idea is to dump the ash often. it burns much hotter when the ash is dumped
KrankieV2 4 months ago
is it raining?
sideslide23 4 months ago
@sideslide23 not during this video but it has rained since :\.. and it will rain tonight and tomorrow...
KrankieV2 4 months ago
i need to make one of those
fordbroncodave 4 months ago
you say fuck a LOT haha
Titliest07 4 months ago
@Titliest07 Are you just now noticing this? hahahaha!
KrankieV2 4 months ago
looks like it's good for melting aluminium
TheAluminiumklorid 4 months ago
Pretty awesome Dude!! Ya got yourself a real inferno there!!☺
805ROADKING 4 months ago
@805ROADKING thanks man :) it's a lot of fun and makes a LOT of heat!
KrankieV2 4 months ago
looks kool
picapop12345 4 months ago
nice
vmxrm85 4 months ago
That barrel was burning allrite :D
coolbluelights 4 months ago
@coolbluelights lol ya when the paint burnt off
KrankieV2 4 months ago
Dude, that's fuckin' bad ass.
BeltDrivenMadness 4 months ago
@BeltDrivenMadness oh yeah. It doesn't take long before the barrel glows red hot. It burns fast and hot. it's awesome haha
KrankieV2 4 months ago
@KrankieV2 Get it to burn white, I'm going to try this with a coffee can.
BeltDrivenMadness 4 months ago