this is all very well for our American and Canadian cousins but no loving for us Brits? Can the AP Projects deliver to us? This looks so amazing and the manual is so clear even a noobie like me is willing to "plash" out and give it ago... if iI could get it delivered that is.
@abbtech. excellent! forgive the obvious questions (did i mention i was a newbie?)
1. As its IR detected do the lights only come on when its dark?
2. Is the wiring needed for this what they call here in England "Alarm/Security 4 Core Cable" the colouring in them are different from your (American) cable, blue, yellow, red, black v green yellow red black?
3. Having this unit on "standby" all the time...does that mean lots of wasted electricity/costs?
Is it possible set it up to active only during a certain level of darkness?
Excellent news about the cables.
31.5 cents a year?? Woah! My god thats cheaper than 1 quarter of a litre of petrol (gasoline) here. No doubt at London electricity rates it will be about £2.00 ($3.00) - still a bargain though!
This system will operate all the time (light or dark). If you need a system that can be set to only operate in the dark have a look at the Reactive Lighting model 2000 stair lighting controller. This system has a light sensor that can be used to sense the light levels and keep the lights from operating during the day. You can see the Reactive Lighting system at reactivelighting period com
No, this system has an infrared beam at the top and bottom to detect someone entering the stairwell, the stairs are then lit and turned off in a specific pattern. It doesn't detect what step the person is on.
Normally they are installed directly in the stringers but in this case that was not possible so there was a small wooden box that was approximately 1 inch X 1 inch and ran up on top of the stringer. This is where the LEDs were mounted and the wires run.
Alan very cool and affordable, 2 questions for you. Are the LEDs exposed (could they be damage by an unsuspecting cleaning lady with a vacume cleaner)? And also where would you suggest storing the controller?
Yes the LEDs are exposed but they are very tough and durable. The normal LED stair lights that we sell are 10mm ones that are in a black bezel. They are simple to install and look great. The only damage we have every heard about is during a renovation where the stairs are getting carpeted and the lights are being installed at the same time. There have been some damaged wires when the carpet installers aren't very careful.
You can see the link to the kit in the video comments (can't leave it here since Youtube doesn't allow links). I will add a link to the manual in the comments also.
this would drive your cat nuts LOL but I would have fun with it too.
kamilleseven 3 days ago
In prevideo picture i see a Mod for Guitar Hero
GEApeRya 1 week ago
Jay shree krisna Parekh saheb, any discount for gujarati brother ?
babanachiket 3 weeks ago
@babanachiket
LOL contact me at
alan att alan-parekh dott com and we can work something out. :)
abbtech 3 weeks ago
And shes buying a stairway to heaven...
SuperPenetration 3 weeks ago
how much would it cost to get you to make me one
SuperUsher10 1 month ago
@SuperUsher10
Thanks for your interest in the stair lights. You can see pricing by clicking the link in the comments.
abbtech 1 month ago
i wanna try to beat the lights up.
IgniTeKHD 1 month ago
this is all very well for our American and Canadian cousins but no loving for us Brits? Can the AP Projects deliver to us? This looks so amazing and the manual is so clear even a noobie like me is willing to "plash" out and give it ago... if iI could get it delivered that is.
muradxs 1 month ago
@muradxs
We ship worldwide! The shipping costs will be calculated during checkout. Our international shipping rates are very economical.
abbtech 1 month ago
@abbtech. excellent! forgive the obvious questions (did i mention i was a newbie?)
1. As its IR detected do the lights only come on when its dark?
2. Is the wiring needed for this what they call here in England "Alarm/Security 4 Core Cable" the colouring in them are different from your (American) cable, blue, yellow, red, black v green yellow red black?
3. Having this unit on "standby" all the time...does that mean lots of wasted electricity/costs?
Thank you.
muradxs 1 month ago
@muradxs
It has a transmitter and receiver so it produces it's own IR light source, this allows it to work all the time.
The different color code is not a problem just write down the colors used when installing it so you get the connections correct.
It will consume about 31.5 cents of electricity in standby mode each year (based on the electrical cost where I live).
abbtech 1 month ago
@abbtech
Is it possible set it up to active only during a certain level of darkness?
Excellent news about the cables.
31.5 cents a year?? Woah! My god thats cheaper than 1 quarter of a litre of petrol (gasoline) here. No doubt at London electricity rates it will be about £2.00 ($3.00) - still a bargain though!
muradxs 1 month ago
@muradxs
This system will operate all the time (light or dark). If you need a system that can be set to only operate in the dark have a look at the Reactive Lighting model 2000 stair lighting controller. This system has a light sensor that can be used to sense the light levels and keep the lights from operating during the day. You can see the Reactive Lighting system at reactivelighting period com
abbtech 1 month ago
I hit the Like button as soon as I heard the music with the stairs getting lit up.
greatidea11 2 months ago
@greatidea11 Thanks!
abbtech 1 month ago
@greatidea11 me too!
mircoenderman 1 month ago
Could do the MJ Billy Jean effect with this.
ventende 2 months ago
@ventende
Is that where the step lights up only when it is is stepped on?
abbtech 2 months ago
@abbtech
Yes, that´s correct.
ventende 2 months ago
@ventende
No, this system has an infrared beam at the top and bottom to detect someone entering the stairwell, the stairs are then lit and turned off in a specific pattern. It doesn't detect what step the person is on.
abbtech 2 months ago
reminds me almost of like how the planes are, they have the light in the passage sometimes..
gabz1989a 3 months ago
What kind of flooring do you have in the video? Do you install the LEDs directly into the flooring?
rastamillion 3 months ago
@rastamillion
Normally they are installed directly in the stringers but in this case that was not possible so there was a small wooden box that was approximately 1 inch X 1 inch and ran up on top of the stringer. This is where the LEDs were mounted and the wires run.
abbtech 3 months ago
Nice! Keep up the good work!
notcranium 4 months ago
i made a picture of the 211 likes and 0 dislikes :P
Markie773 4 months ago
You inspired me to do my own version of stairs lighting. Thanks!
notcranium 4 months ago
@notcranium
Great, I have just featured your lights on Hacked Gadgets.
hackedgadgets (dot) com/2011/10/26/diy-stairs-illumination-project-based-on-an-arduino/
abbtech 4 months ago
cool
onedollarjuggalo 11 months ago
What's the song.. nice space craft lights
mafjr16 11 months ago
@mafjr16
The song is listed in the video comments.
Yes those landing lights are great!
abbtech 11 months ago
NIce. I'd do that to my house.
MrAndromedean 11 months ago
Alan very cool and affordable, 2 questions for you. Are the LEDs exposed (could they be damage by an unsuspecting cleaning lady with a vacume cleaner)? And also where would you suggest storing the controller?
RCWinnipeg 11 months ago
@RCWinnipeg
Yes the LEDs are exposed but they are very tough and durable. The normal LED stair lights that we sell are 10mm ones that are in a black bezel. They are simple to install and look great. The only damage we have every heard about is during a renovation where the stairs are getting carpeted and the lights are being installed at the same time. There have been some damaged wires when the carpet installers aren't very careful.
abbtech 11 months ago
guide or tutorial please :D
Zentrius 11 months ago
@Zentrius
You can see the link to the kit in the video comments (can't leave it here since Youtube doesn't allow links). I will add a link to the manual in the comments also.
Alan
abbtech 11 months ago
I want Alan to be my dad so he can teach me all theese cool suff :D
Darkeye994 11 months ago