man i miss my moms mach1 that bitch was all black and ran 7.60 in the 1/8th with just headers catback and bolt ons and was still a street car. theis bitches can move
I'm trying to figure out, the mentality of the two idiots who disliked this video. It either came up on their newsfeed, because they like car vids, in which case, they should like it, because the car sounds wicked. OR, they ACTIVELY searched out, and viewed this video, which pretty much describes itself verbatim in the title.
yep that'd be the corvette zr1. it had a 5.7 liter DOHC V8 that was built by Mercury Marine. they were pretty costly to maintain though from what i hear but it's a pretty awesome engine
I have a 03 Mach1 in the same color with twin 62mm acufab, CL 85mm MAF and CAI, O/R UPR X-pipe, Viper spec T-56 six speed from D&D performance, Alum 12lb fly and alum D/S with kevlar clutch, with stock 3:55 gears with a custom tune from SCT from JMS tuning here in MS. It was dynoed at JMS chip and ran at 309 RWHP Natural aspirated. Future plans are to add some xtreme energy comp cams,3/8'' intake spacer, longtubes, meizer electric water pump, and maybe some taller gears maybe 3:73's or so.
wow, u are a fucking tease. you should have reved that badass up.. shit is sexyas fuck man.. i am a huge mustang fan.. mustangs 4 life.. ufck importsd.. mustang pride man... fuckin sick ass video bro.... i like that ROAR shit.. fuck those japapanese cars that sound like vacuum cleaners..
ur a idiot, learn to appreciate all cars. all carsare built differently due to laws and other stuff. mach 1 is a nice car adn the only mustang i would ever buy. although the interior is hideous. the mach is pretty cool. id rather have a nsx but hey cool car
@Heroin666 dude there's PLENTY of vids on the net of machs reving and racing and what have you...the reason for this video is to hear the cam lope at idle. if he's reving it to death you couldn't hear that...there's plenty of other vids where you can see machs w the same setup reving, I'm mustangs for life too I've owned 6 and my next will probably be a mach...hopefully next summer...
With the cams and all the bolt onls you need to be able to get the exhaust gasses out as fast as possible. Believe me this car will spin up to 7500k before you can look at the tachometer.
sounds awesome, but sounds like there might too much of a loss in back pressure, just a hunch. and if theres too much of a loss, u lose HP too, but who cares, the car is fast anyway.
Less backpressure does not equal lose in anything, it just movesit up the RPM band so if you don't change the gears or retune the computer it feels like you've lost.
What's the spec on this cams please
mdodge011 3 months ago
one of the rare times you dont need a wot to appreciate the sweet sound of american muscle
Rumplemenz 8 months ago
sounds badass. i wish mine sounded like that lol
uberowns 1 year ago
specs?
nightkrewmustang 1 year ago
man i miss my moms mach1 that bitch was all black and ran 7.60 in the 1/8th with just headers catback and bolt ons and was still a street car. theis bitches can move
97AudiA4kid 1 year ago
I'm trying to figure out, the mentality of the two idiots who disliked this video. It either came up on their newsfeed, because they like car vids, in which case, they should like it, because the car sounds wicked. OR, they ACTIVELY searched out, and viewed this video, which pretty much describes itself verbatim in the title.
Morons..
NWpowerhouse85 1 year ago
what kind of numbers are you making
elnrownr 2 years ago
Yes chevy likes pushrods engines, b ut i do believe they put a quad cam in a vette in the mid 90s i think.
cooldbz12 2 years ago
yep that'd be the corvette zr1. it had a 5.7 liter DOHC V8 that was built by Mercury Marine. they were pretty costly to maintain though from what i hear but it's a pretty awesome engine
jboy1456 2 years ago
northstar too
TheLaneyzf 2 years ago
SOHC (one cam over each head) = 2 cams total
DOHC (2 cams over each head) = 4 cams
No pushrods in either.
cooldbz12 2 years ago
yeah, as if i was confused!!!!!!!!!!!!
papasmurf62713 2 years ago
What kinda power did it put down with the cams? Any headwork?
blown06tc 2 years ago
any numbers yet?
biker1510 2 years ago
I have a 03 Mach1 in the same color with twin 62mm acufab, CL 85mm MAF and CAI, O/R UPR X-pipe, Viper spec T-56 six speed from D&D performance, Alum 12lb fly and alum D/S with kevlar clutch, with stock 3:55 gears with a custom tune from SCT from JMS tuning here in MS. It was dynoed at JMS chip and ran at 309 RWHP Natural aspirated. Future plans are to add some xtreme energy comp cams,3/8'' intake spacer, longtubes, meizer electric water pump, and maybe some taller gears maybe 3:73's or so.
brian67shelby 3 years ago
Where do you get these cams at?
violentstang1998 3 years ago
nice mann. bad ass horsepower apx?
ljdgm 3 years ago
sounds awesome
snowman110011 3 years ago
wow, u are a fucking tease. you should have reved that badass up.. shit is sexyas fuck man.. i am a huge mustang fan.. mustangs 4 life.. ufck importsd.. mustang pride man... fuckin sick ass video bro.... i like that ROAR shit.. fuck those japapanese cars that sound like vacuum cleaners..
Heroin666 3 years ago 9
This has been flagged as spam show
ur a idiot, learn to appreciate all cars. all carsare built differently due to laws and other stuff. mach 1 is a nice car adn the only mustang i would ever buy. although the interior is hideous. the mach is pretty cool. id rather have a nsx but hey cool car
pureadrenaline25 3 years ago
@Heroin666 dude there's PLENTY of vids on the net of machs reving and racing and what have you...the reason for this video is to hear the cam lope at idle. if he's reving it to death you couldn't hear that...there's plenty of other vids where you can see machs w the same setup reving, I'm mustangs for life too I've owned 6 and my next will probably be a mach...hopefully next summer...
midnight347 1 year ago
Omg i kept playing this over and over
Westley420 3 years ago 2
damn i just got that car what cam??????
eya07prado 3 years ago
I WANT!!!!!!!!!!
carconnoisseur 4 years ago
2 cams isnt it....DOHC?
ponyboy88 4 years ago
V8 DOHC = 4 cams
justinsride 3 years ago
SOHC = 1 cam on top of each head = 2 cams
DOHC = 2 cams on top of each head = 4 cams
cooldbz12 3 years ago 7
yup in beatiful harmony. love those 4v
santiagomel00 4 years ago
wow that is a badass sound!
deathjackal911 4 years ago
beautiful
90Turbo7m 4 years ago
I love it, that sounds great, nice job!!!
RedMachOne 4 years ago
i love how it sound.
simon21792 4 years ago
I just love that sound. Nice.
Nihil2005 4 years ago 2
how much was da dual cams and what kind of cams?
P1RU22 4 years ago
That sounds beautiful!
XtremeChange 4 years ago
Are those HP's 292 grind?
fearlesssymmetry 5 years ago
eh sounds good, it just dosnt have lound pipes it sounds like it has some hot cams too
408Mustangs 5 years ago
awesome sounds like a 1969 mach one not a 2003 mach one
xD
marjac06 5 years ago
Wonderful, ain't it?
EveryMn 4 years ago
What Kind of headers do u have on ur mach 1 and muffler setup
harorider95 5 years ago
When this video was made, I had bbk ceramic lt's, bbk o/r h pipe and slp lm1 catback.
townson24 5 years ago
With the cams and all the bolt onls you need to be able to get the exhaust gasses out as fast as possible. Believe me this car will spin up to 7500k before you can look at the tachometer.
townson24 5 years ago
sounds awesome, but sounds like there might too much of a loss in back pressure, just a hunch. and if theres too much of a loss, u lose HP too, but who cares, the car is fast anyway.
danrdz06 5 years ago
Less backpressure does not equal lose in anything, it just movesit up the RPM band so if you don't change the gears or retune the computer it feels like you've lost.
EveryMn 4 years ago