brute force 750, king quad 700, rincon 680: mudding at busco beach

[mudriding350]

what size tires on that Brute??

[76quad]

@mudriding350 30" mudlite xxl

[justinmajors24]

what exhaust is on the brute force? plz reply

[76quad]

@justinmajors24 Its just a slip on HMF utility series pipe.

[19mudbogger98]

Is that rincon for sale?

[76quad]

@19mudbogger98 It was for sale, but it has sold already

[coalminedipper]

at the begining when you guys were just playing i love it thats were i believe i would have the most fun yes going threw the deep stuff is fun but i just wanna play i dont know thats thats me or everybody

[76quad]

@coalminedipper Yes both are fun. Just playing around is all i used to do, but i'm getting more and more into the deep stuff and that is a blast too!!

[Sotexy2]

man that is one bad brute, looks like fun!

[creepiestcat]

Hey man im planning on going to busco but every video i see the mud holes just swallow the quads.. Did your brute have any problems because i see it has no snorkel.. please reply. thanks

[76quad]

@creepiestcat Had no problems with the brute, but you do have to watch what holes you go into without a snorkel. Best thing to do is ride with somebody who knows the place or just be careful when entering holes. There's still plenty you can ride without snorkels.

[creepiestcat]

@76quad Alright bro thanks alot and your brute is pretty sick man sounds like a beast. Ill have some video's of mine up when ever i get it fixed. ever had a problem with leaking coolent and fan not working? but thanks alot. please sub and ill do the same.

[76quad]

@creepiestcat The brute actually belonged to my cousin. He has sold this one and has another one now with a 800cc big bore kit in it. It really is a beast!! No leaking coolent problems that i know of, but there is a connector under the seat that goes bad and makes the fan not work. Not real sure which one it is. For more info like that about a brute force, you should go to mudinmyblood and search or ask those guys. Lof of info about brutes there.

[creepiestcat]

@76quad okay man thanks!

[dirtbike2716]

That brute sounds awesome but it needs outlaws silverbacks or mudzillas and man the snorkels on the kingquad r sweet

[76quad]

@dirtbike2716 Thanks dude! Take a look at my newer videos where i redone the snorkels on the king quad along with a radiator relocation kit up top. I like it much better the way it is now!

[mistermoneybags12]

what was the first 4 wheeler in the video that went past the camera

[76quad]

@mistermoneybags12 the first 4 wheeler was a brute force 750

[genocide66618]

damn shame that the king quad cannot go everywhere like the others cause its the most toughest quad ever it look like they dont have enough motor.

[genocide66618]

damn shame that the king quad cannot go everywhere like the others cause its the most toughest quad ever it look like they dont have enough motor.

[76quad]

@genocide66618 The king quad's got plenty of motor. It would not go as far in this video cause it had the shortest tires and no lift. Look at some of my newer vids with the lift and 31's on it. I can go just as far or farther than anyone in my group now!!

[genocide66618]

@76quad yea but it still dont have torque like a brute force and the front bumper is praticaly tuching the ground but he is still the most toughest quad ever and by the way sry for my english i am a french guy.

[76quad]

@genocide66618 Of coarse a single 695cc motor wont have the torque that a 750cc vtwin has. But with the mods i have it is darn near close, and i wont have to spend near the money to rebuild if it comes to that!!

[genocide66618]

its a shame that the king quad add not enough motor they dont go anywhere like the others in the mud but they are the toughest quad ever its a shame for this.

[Acke1100]

which exhaust do you have on it?

[76quad]

@Acke1100 it has a hmf utility series slip on muffler

[Acke1100]

which year is the brute ?

[76quad]

@Acke1100 2007

[tazztower44]

that brute sounds nice...nothing quite like em..just bought an 08 750 and i love the power..just stock with 25" mudbugs but i havent been over the tires yet..lol..great clip

[MrYoshik79]

Hi....witch size of tires you have on the brute force?

[76quad]

@MrYoshik79 The brute force is on 30" mudlite xxl's for 12" rims.

[MrJahhead]

I love hondas as much as the next guy but the brute force is exactly what the name calls it. that things a fuckin brute!

[04tsxpower]

shaft drive period

[honda9752]

Nice mudding my dad just bought those tires be like what they do

[FrankForGames]

ok belts arnt all bad but still i would prefer a 4wheeler without 1.

[76quad]

@FrankForGames I used to think the same way till i actually rode a grizzly and then actually owned a king quad.

[FrankForGames]

(word of good advice)stay away from kawasoki and try to get a honda or yamaha, because the belt on a kawasoki makes the 4wheeler a complete mess. if you are a muddrider stay away from kawasokis.

[76quad]

@FrankForGames My cousin has a kawi brute force 750 set up for the mud now with 30" silverbacks and has never slipped the belt or had any other belt problems with the clutch set up properly

[KOIxFOXTROT]

@FrankForGames had a brute 750 with 29.5 outlaws and a snorkel i could romp it in mud up to the bars and never even slipped the belt. the only problem i ever has with the thing was that if you got off in something and get stuck in 2 wheel you cant swap to four wheel

[MonsterEnergyMudding]

@FrankForGames only if its all stock and runnin the cheap belts

[comedian376]

@FrankForGames Noone should listen to you. It's all in throttle. I have 29.5 outlaws on my brute and havent even come close to slipping a belt.

[USADFH]

mine is in limp mode witch is were you spudder out at 1/4 throttle and they gotta reset the computers

[TheKILLSHOT24]

is there any flaus with the brute? im thinkin about gettin one and i was wonderin if the belt slipps very easy or often?

[76quad]

@TheKILLSHOT24 From my experience with them, a properly clutched brute does just fine. However, they are not a constant tension belt like an AC, yamaha, or suzuki. The brutes are easier to smoke a belt because of their set up, but also depends on the driver too. On a brute, ya kinda have to go ahead and mash the throttle pretty good instead of lightly feathering the throttle like you can on a constant tension belt set up.

[76quad]

@TheKILLSHOT24 The only real flaws i can think of is brute owners say the oil seals go bad pretty often, and if they are sunk, usually needs a rebuild.

[TheKILLSHOT24]

@76quad How much would a rebuild cost?

[76quad]

@TheKILLSHOT24 I've heard on the brutes a stock rebuild is about $1800 and $2500 for high compressioin build. Thats info i got from mimb, which is a great site to look up and read up on the ins and outs of the brute forces. MIMB stands for MUDINMYBLOOD

[209brett]

how do u snorkle the belt on the kingquad

[76quad]

@209brett The belt inlet is pretty easy, but the belt exhaust is another story. I have run it a couple of different ways and like the way i have it now. It is run around the frame over the drive shaft to the left side and down up to the front between the floorboards and motor, run back across the right side in front of the motor and up to the front. If you give me your email address, i could send you some pics if you are interested.

[209brett]

how do u snorkle the belt on the kingquad

[bballplaya123678]

i know that you only have the king quad 700 but how do you think the king quad 750 would do compared to the brute and which one would you prefer

[76quad]

@bballplaya123678 Well i like the king quad better for the constant belt tension set up and for reliability and the kings can be set up to run pretty strong, but it just cant beat a comparably modded brute force for power. Also a king quad 750 is not that much stronger than a 700 king quad. 1 more horsepower according to suzuki. They really only went from a 695cc motor to a 722cc motor and slightly changed the ecu for a little better takeoff.

[SoHeavy3]

im thinking about getting a brute, whats a good snorkel for it?

[76quad]

@SoHeavy3 If you think you can do it yourself, there is a good write up with pics of how to do it over on mudinmyblood. I'm not sure who makes the best kit for them.

[stephshane1]

how does the the brute do any probs with it out rideing ?

[76quad]

@stephshane1 This brute has a bunch of mods and lots of power and the only problem he had out of it was the fan not coming on properly. Found out it was a bad fused type of connector under the seat. Bypassed this and put on a toggle switch for the fan and no more problems.

[nkkaman44]

that rincon got showed up by the brute

[jessejewfro]

It took me 3 hours and 30 bucks

[josephnbl91]

the yellow king quad at 3:35 , does it have a submarine snorkel kit on it? from traxsmotorsports? if it does, does it have any leaking problems? like does it let water in through any of the pre-glued fittings?

[76quad]

I made the snorkles myself with abs from Lowe's, so i'm not sure how the submarine snorkle kit holds up. I looked at that kit before i made mine. Looks like a nice kit. Just too expensive for me.

[josephnbl91]

Looks good. ya i was gunna make snorkels for mine too but it was my first time, it woulda been alot harder without the kit. ive never plumbed befored im not that experieneced yet.

[76quad]

this was my first time doing them as well. I found some good pics of how to route them over on highlifter. I studied the pics for a while and went out and tackled the job. The main thing is not to glue the sections together till you know you got em right.

[josephnbl91]

yea i musta went through like 100 forums on snorkels lol. the kit just makes life easier. even though it didnt fit perfect. i actually cut one of my front rack supports because the pipe was in the way...

[mountianbikeer]

@76quad did u use abs or pvc pipe for a snorkel?

[76quad]

@mountianbikeer i used abs

[arcticcatman620]

That Brute Sounds like a Beast!!