This has been flagged as spam show
Should you need any further information please feel free to contact the undersigned any time of the day.
Sharif Shamma.
Sales Engineer.
Digi Matrix Technologies.
P.O Box: 32067 --Dubai -- UAE.
Tel: +971-4-3347401.Fax: +971-4-3347402.
Mob: +971-50-6600513.
E-mail: sharif at digimatrixtech com
wwwdigimatrixtechcom
sherieefshamma 8 months ago
good work!
can you tell me what steppers you used, and what driver???
sabladask 1 year ago
Nice work!
Rogerquin 1 year ago
Its sound like a piano!)
Iteratorus 1 year ago
nice work for a homebuilt!
biessebod 2 years ago
Great work!
mclaudtt 2 years ago
nice! where can i get the plans to do this machine?
chobiRED 3 years ago
im new to cnc... how do you scale your project? in cad or cam? thanks
toxicfrost123 3 years ago
Question: I like your roller bearing design. I wonder if you could tell me where you obtained the roller bearings from.
Thanks
Bill
chillywilly9rules 3 years ago
Nice!
I am thinking about building one of these. How long did it take and how much did the hardware/software cost?
YTRocketMan 3 years ago
Thanks! Took about 40 hours and around 300 bucks. The most expensive parts are the controller board and the stepper motors.
aolshove 3 years ago
Nice machine. Are you not going to shield off does bearings on your moving table? They are rolling on the chips.
Nhyf 3 years ago
I would sure like you to make a video about your Machine. Show us what motors, screws, rails, and so on. You seem to have a great knack for this.
Thank You
Radcnc 3 years ago
what kind of bit are you using, carbide?
spdrmnstr1 3 years ago
Yes, carbide.
Thats the same one that im building. Im mostly done just waiting for the motors.
What software are you using, and is that PVC that your cutting?
Justinh09 4 years ago
Mach3 is the control software. I'm cutting a foamed PVC called "Komatex". Good luck on your machine!
aolshove 4 years ago
Nice machine!
AmericanFabricator 4 years ago
Thank you!
Loading...Saving...
Loading...Saving...
This has been flagged as spam show
Should you need any further information please feel free to contact the undersigned any time of the day.
Sharif Shamma.
Sales Engineer.
Digi Matrix Technologies.
P.O Box: 32067 --Dubai -- UAE.
Tel: +971-4-3347401.Fax: +971-4-3347402.
Mob: +971-50-6600513.
E-mail: sharif at digimatrixtech com
wwwdigimatrixtechcom
sherieefshamma 8 months ago
good work!
can you tell me what steppers you used, and what driver???
sabladask 1 year ago
Nice work!
Rogerquin 1 year ago
Its sound like a piano!)
Iteratorus 1 year ago
nice work for a homebuilt!
biessebod 2 years ago
Great work!
mclaudtt 2 years ago
nice! where can i get the plans to do this machine?
chobiRED 3 years ago
im new to cnc... how do you scale your project? in cad or cam? thanks
toxicfrost123 3 years ago
Question: I like your roller bearing design. I wonder if you could tell me where you obtained the roller bearings from.
Thanks
Bill
chillywilly9rules 3 years ago
Nice!
I am thinking about building one of these. How long did it take and how much did the hardware/software cost?
YTRocketMan 3 years ago
Thanks! Took about 40 hours and around 300 bucks. The most expensive parts are the controller board and the stepper motors.
aolshove 3 years ago
Nice machine. Are you not going to shield off does bearings on your moving table? They are rolling on the chips.
Nhyf 3 years ago
I would sure like you to make a video about your Machine. Show us what motors, screws, rails, and so on. You seem to have a great knack for this.
Thank You
Radcnc 3 years ago
what kind of bit are you using, carbide?
spdrmnstr1 3 years ago
Yes, carbide.
aolshove 3 years ago
Thats the same one that im building. Im mostly done just waiting for the motors.
What software are you using, and is that PVC that your cutting?
Justinh09 4 years ago
Mach3 is the control software. I'm cutting a foamed PVC called "Komatex". Good luck on your machine!
aolshove 4 years ago
Nice machine!
AmericanFabricator 4 years ago
Thank you!
aolshove 4 years ago