@gadgetgeinpig - Your vango swing is a non DMX light. Just sound-to-light, as far as I know. If you want to be able to program your Mojo scan to do chases and patterns etc then you could get a controller - although you'll be able to do more complex and impressive shows if you get hold of more scanners - having two (or four) of them would be great to program together.
Hi mate i have 2 spinmaster 1's and 2 spinmaster 3's can i link all 4 together withount a dmx controller 1 master and 3 slave ? if so which dip switches should be where ?
Hi - Should be okay - some patterns may not match though. Turn Func. switch OFF on all lights except the first one (spin 1 no. 1)
Let's start with the two spin 1's. Flick Dip no. 2 (2) on the first one (add 6 or 7 for fast/slow show). (this is the master). Put dip no. 3 (4) on the second one. Now put dips no. 1 (1), 2 (2) and 3 (4) on on first spin 3, and no. 1(1), 2(2), 3(4), and 4 (8) on the 2nd spin 3. Link them all together and switch on/play music. Let me know how it goes.
yes - with audio, it would probably be best to use the mojo scan as the master for audio, and then set up the spinmaster3 as slave. But the mojo scan's show does tend to make the barrel spin backwards and forwards really quickly sometimes, which might damage it. With DMX, you can use them together on the same controller, just put them on different addresses, you can control their separate functions as you wish. See my DM4 video 'how to make a light show' if you're interested in using a Geni DM4.
It is thank you very much nice lights.. i plan to have a huge ligth show sometime soon and plan to have four of them going together with a laser and mystic light and plenty of fog
yes, and function dip 1(the left of the two separated from the other nine). add dip 6 for slow audio, or add dip 7 for fast audio. This is providing that you have an MJC-1X. The audio show will be a bit different to the one in the video, as that was an audio show from the old MJC-1, not MJC-1X. That is unless you have an MJC-1, in which case you only need dip 6 on. (There's no speed settings for this one).
well, the two mojo scans are actually different in terms of their model number. The one on the right is the old MJC-1, and the one on the left is the neweer MJC-1X. The MJC-1 was running the newer one under its audio program. (Dip 6), but for audio shows on the MJC-1X, or the spinmaster (MJS-3) then you need function dip1 on, and then regular dip1 on. For fast paced add dip 7, for slow, add dip 6. For DMX, leave all dipswitches off. Hope this has helped.
thanks! the scanner on the far right was running the scanner on the far left under its audio show. (There's 2 Mojo Scan Is, with a Spinmaster III in between them if you're wondering) I also have the Geni DM4 DMX controller - one day i'll put up a video showing how it looks!
yeah there good lights but you should try some Smart scans (i have a vid on my account) also i have the vellman controller which i have now setup with freestyler
yes i'm going to but the velleman controller soon - out of stock everywhere at the moment though. The only thing that put me off with the smart scans is that they look quite brittle in terms of design - if you dropped them (not that I'd intend to) they'd probably just hit the floor and crack in two. The ones I have are pretty robust and sturdy, but the smart scans do look very attractive anyway. Thanks for your comment!
what is the name of the song please!!!!!!!!!1
joeljaf95 4 months ago
3:01
mvinaround 9 months ago
great vid well done on all ur vids james and to all u lot dissing james, dont......................keep on the good work buddy ..
an06dyh 1 year ago
como se invierte el pan? desde los mojo?
para no tener que hacerlo desde la consola!
leansonido 1 year ago
i've got a Mojo Scan 1 and a Prosound Vango Swing. Do I need a dmx controller or should i just let it play. Thanxs
gadgetgeinpig 1 year ago
@gadgetgeinpig - Your vango swing is a non DMX light. Just sound-to-light, as far as I know. If you want to be able to program your Mojo scan to do chases and patterns etc then you could get a controller - although you'll be able to do more complex and impressive shows if you get hold of more scanners - having two (or four) of them would be great to program together.
jamesb1919 1 year ago
spinmasters are good but check the video of the irock 6b's there much better and dmx linked with controller or audio
Huckerby2k9 2 years ago
OMG - It's Jeremy Clarksons son!
Uberlaser 2 years ago
duuude, im not joking ... your fog machine ... you need to throw that 700w shit in the garbage =D haha
sakray2 2 years ago
Hi mate i have 2 spinmaster 1's and 2 spinmaster 3's can i link all 4 together withount a dmx controller 1 master and 3 slave ? if so which dip switches should be where ?
fellamelad100 2 years ago
Hi - Should be okay - some patterns may not match though. Turn Func. switch OFF on all lights except the first one (spin 1 no. 1)
Let's start with the two spin 1's. Flick Dip no. 2 (2) on the first one (add 6 or 7 for fast/slow show). (this is the master). Put dip no. 3 (4) on the second one. Now put dips no. 1 (1), 2 (2) and 3 (4) on on first spin 3, and no. 1(1), 2(2), 3(4), and 4 (8) on the 2nd spin 3. Link them all together and switch on/play music. Let me know how it goes.
James
jamesb1919 2 years ago
thanks for the fast reply dude i will try it and let you know !!! thanks again .
fellamelad100 2 years ago
no u cant because they are 2 completly diffrent lights
shuffle953 2 years ago
Comment removed
EquineGirl1711 2 years ago
hey, have you tried the Geni Burst? apparently bigger and brighter MS 200 bulb. No videos on You Tube!
laurielozza 2 years ago
How many scenes!!!!!!!!!!!!!!!!!!!
syncmaster710n14 2 years ago
oh probably about 100 or so for the whole thing.
jamesb1919 2 years ago
well done dude, great show. How much are the Scan 1's to purchase new?
laurielozza 2 years ago
i like your videos and what is the adress for the mojo scan y have 7 and i dont know how to program with the american dj dmx
hexhektor 3 years ago
nice vid i got a question can you plug the mojo scan and the spinmaster3 on the same control
matios666 3 years ago
yes - with audio, it would probably be best to use the mojo scan as the master for audio, and then set up the spinmaster3 as slave. But the mojo scan's show does tend to make the barrel spin backwards and forwards really quickly sometimes, which might damage it. With DMX, you can use them together on the same controller, just put them on different addresses, you can control their separate functions as you wish. See my DM4 video 'how to make a light show' if you're interested in using a Geni DM4.
jamesb1919 3 years ago
Nice video, thanks for uploading. :).
benwms 3 years ago
What is the song ??
ElChimicuil 3 years ago
i think it's Ida Corr vs Fedde le Grand - Let Me Think About It
jamesb1919 3 years ago
Thanks !!
ElChimicuil 3 years ago
no.
jamesb1919 3 years ago
Those lights are bad ass! Nice Vid
jimg76 3 years ago
Whats are the name of the songs please someone tell me.. i love these songs
djadrenaline123 3 years ago
it's ida corr vs fedde le grand - let me think about it
jamesb1919 3 years ago
It is thank you very much nice lights.. i plan to have a huge ligth show sometime soon and plan to have four of them going together with a laser and mystic light and plenty of fog
djadrenaline123 3 years ago
These lights are terrible... Sell them while they still work and get some decent ones.
zomgdazzy 4 years ago
how dare you.
jamesb1919 4 years ago
indeed... they're amazing!
~~ poor MJS-III owner waz ere :D ~~
omardude39 3 years ago
so i just stick them on dip switch 6 for the audio on scans and link them up
SUPERDJ2008 4 years ago
yes, and function dip 1(the left of the two separated from the other nine). add dip 6 for slow audio, or add dip 7 for fast audio. This is providing that you have an MJC-1X. The audio show will be a bit different to the one in the video, as that was an audio show from the old MJC-1, not MJC-1X. That is unless you have an MJC-1, in which case you only need dip 6 on. (There's no speed settings for this one).
jamesb1919 4 years ago
what dip switches did you use
SUPERDJ2008 4 years ago
well, the two mojo scans are actually different in terms of their model number. The one on the right is the old MJC-1, and the one on the left is the neweer MJC-1X. The MJC-1 was running the newer one under its audio program. (Dip 6), but for audio shows on the MJC-1X, or the spinmaster (MJS-3) then you need function dip1 on, and then regular dip1 on. For fast paced add dip 7, for slow, add dip 6. For DMX, leave all dipswitches off. Hope this has helped.
jamesb1919 4 years ago
Funny voice lol
radioviper 4 years ago
lol Yr controler are a pain lol
radioviper 4 years ago
Very nice, did you pair the mojo spinmaster 1's up or had them under dmx control? I wud like some of those lights so if ur ever sellin let me no!
Ad
crazycarper14 4 years ago
thanks! the scanner on the far right was running the scanner on the far left under its audio show. (There's 2 Mojo Scan Is, with a Spinmaster III in between them if you're wondering) I also have the Geni DM4 DMX controller - one day i'll put up a video showing how it looks!
jamesb1919 4 years ago
yeah there good lights but you should try some Smart scans (i have a vid on my account) also i have the vellman controller which i have now setup with freestyler
smitty909 4 years ago
yes i'm going to but the velleman controller soon - out of stock everywhere at the moment though. The only thing that put me off with the smart scans is that they look quite brittle in terms of design - if you dropped them (not that I'd intend to) they'd probably just hit the floor and crack in two. The ones I have are pretty robust and sturdy, but the smart scans do look very attractive anyway. Thanks for your comment!
jamesb1919 4 years ago
yes dear!
jamesb1919 4 years ago
puppy
DJsam1993 4 years ago