You couldn`t be more wrong- the OnGARD is designed in such a way that it would be impossible to remove the OnGARD via a Slim- Jim. Even if you could find a way to insert the slim jim on an upward angle- it would still be impossible to lift up the block up and out of the female plate. With all due respect this is one of the first items that was addressed during the engineering process.
This would be so easy to defeat. Just a slim bar slid under the door and in between the lock and the base and then pop it up. 2 seconds max. If they has a small dam or stop on the base it would stop this.
That's a pretty solid looking piece of kit. Anything that gives me an extra few seconds to get to the 12 ga under the couch (living room), the .45 in the nightstand drawer (bedroom), the .357 magnum in the desk drawer (home office), the .38 in the silverware drawer (kitchen) or the 9mm in my holster (anywhere I am) is something I may be interested in.
In all of my years in the security industry I have never heard of that or something similar happening. Burglars are about speed - typicly when an intruder comes upon the ONGARD they move on to the next house.
When I installed my gun safe I didn't drill through the tiles, but my buddy who has said you have to stay away from the grouted edges, drill a tiny-pilot hole, and progressively drill larger each time...
At first I think it's a little strange, but after knowing how much work and effort you had put in the videos, I really appreciate your work! OnGard brings me PEACE!
Just a quick question...What about if you live on your own and have to leave for work each day? You can set this thing when you leave the house can you? Otherwise you wouldn't be able to get back in...So am I right in assuming this is only good while you are at home in the house?
Great question- If you dont have a garage type door to exit--then you are correct. However the OnGARD could be utilized on all doors excluding the door you exit. Needless to say- many homeowners have a garage to exit from-but not all.
You are correct but the glass panel is treated with shattergard glass protection film.
shattergard 5 months ago
am I the only one that noticed that big breakable piece of glass for an easy entry
barstoolguru 5 months ago
You couldn`t be more wrong- the OnGARD is designed in such a way that it would be impossible to remove the OnGARD via a Slim- Jim. Even if you could find a way to insert the slim jim on an upward angle- it would still be impossible to lift up the block up and out of the female plate. With all due respect this is one of the first items that was addressed during the engineering process.
shattergard 5 months ago
This would be so easy to defeat. Just a slim bar slid under the door and in between the lock and the base and then pop it up. 2 seconds max. If they has a small dam or stop on the base it would stop this.
awd3atms 5 months ago
That's a pretty solid looking piece of kit. Anything that gives me an extra few seconds to get to the 12 ga under the couch (living room), the .45 in the nightstand drawer (bedroom), the .357 magnum in the desk drawer (home office), the .38 in the silverware drawer (kitchen) or the 9mm in my holster (anywhere I am) is something I may be interested in.
xekul 11 months ago
This might sound silly, but is it possible robbers can use a magnet or something from the outside of the door to lift it off it's brace?
Or even break the glass and drop a hook device and lift it off?
greenleaflink 11 months ago
In all of my years in the security industry I have never heard of that or something similar happening. Burglars are about speed - typicly when an intruder comes upon the ONGARD they move on to the next house.
However anything is possible!
shattergard 11 months ago
@shattergard
Thanks!! I certainly will invest in one of these...just gotta figure out how to drill on tiles lol
thanks for the how to video also :)
greenleaflink 11 months ago
I would hire a local handy man to to handle the installtion on tile. Dont attempt yourself.
Thanks
shattergard 11 months ago
@greenleaflink
When I installed my gun safe I didn't drill through the tiles, but my buddy who has said you have to stay away from the grouted edges, drill a tiny-pilot hole, and progressively drill larger each time...
WatchRyder 11 months ago
Wow, need to drill the floor?
galeroarty1 11 months ago
ONGARD will be #1 in security product in UK very soon!
delphinetruocchiod 11 months ago
The video shows installation is simple. I realize that for great products, the concept is very very simple.
beauhemminger 11 months ago
Very good, I'm waiting for such video for a very long time.
wilbermozer 11 months ago
Received and install in the morning. The box I received is light. It's made of polymer, non rusty.
brilliant product.!
MrAndrewLan 11 months ago
Is the lower plate durable? Can it be scratched easily?
MrFranklinLaw 11 months ago
installation is easy. thank you for your video.
lindsaybrak 11 months ago
Thank you for your business :)
shattergard 11 months ago
Briliant video and product itself! I wish I knew of this product 10 years ago. I can make a fortune with it.
vintsonjohn 1 year ago
What is the standard gap height?
MrElliott65 1 year ago
You will need a min of 1/2 inch
shattergard 1 year ago
I think I need to cut my door - the gap is too small for the base of OnGard.
ggaylenatonabah 1 year ago
What is inside the box?
ssharylchatham 1 year ago
I like to sell OnGard in MO- incase you don't know what happened in MO, google it.
Nuniknunik532 1 year ago
Can we install on a double door?
mikebogust 1 year ago
yep easy to install
SpencerIgwe 1 year ago
Is the base rust free? I intend to put one in my bedroom to make it like an emergency room.
ridwan743 1 year ago
fully rust proof
shattergard 1 year ago
The box contain everything you need to install, even it give you an extra screw :P
leroywittbrodt 1 year ago
it should be ok dude, most of us here had no problem at all.
ShelbyAmbres 1 year ago
Just received my OnGard. WIll install it. Will let you know the result :)
MrDuncanHT 1 year ago
How deep should i drill?
konbuckner 1 year ago
about two inches
shattergard 1 year ago
Installation is easy. I will buy 1 for my 72 years old auntie.
Oliverm555 1 year ago
I spoke with a person from ShatterGard company, he was ver helpful.
darrelbroome 1 year ago
I install the door brace already! very easy. I'm gonna paint it in white now, so that it's in sync with my door.
acclairlannanla 1 year ago
you will void the warranty should you decide to paint
shattergard 1 year ago
I'm checking on the latest price online now. How is the country wide promotion/release?
emmanuelhronek 1 year ago
Nice installation video! I guess some experts will try to test by using a battering ram.
Hurleycool88 1 year ago
Yeah me too! However I bought one on ebay.
gilnasaire 1 year ago
I went to HOme Depot but can't find OnGard. However, I can find it on Amazon and ebay. Finally ordered 2 on Amazon. This is truely an IT century!
gwendolynraulinog 1 year ago
How long will the brace last?
alphonsoscorsone15 1 year ago
if you can install ongard, thugs can't ever sneak inside your house.
danbrucker 1 year ago
Do you have any security door lock device that I can install on my garage "pull up" door?
Hintonme42 1 year ago
I am sorry not yet
shattergard 1 year ago
I'm going to install onGard on my carpet floor, I'm a bit confused, whether I need to cut the carpet, or overlay the ongard over carpet?
kenhermanstorfer 1 year ago
please call 888-306-7998-14 for tech support. Installing on carpet is no problem.
shattergard 1 year ago
Totally agree with you, install OnGard is the easiest thing to do.
jjameymunoz 1 year ago
In the box that just arrived this morning, I receive everything I need to install, even a link to this instruction video :) great job!
marshallthomanm 1 year ago
I can't believe that it's that easy to install OnGard!
wesleyschaubhut 1 year ago
I like the way OnGard is permanently installed.
tterresashutler 1 year ago
I recall few weeks ago in a shopping mall there is a group of ppl asking other to kick open a door. I don't know whehter there is OnGard involved.
waldocantadorew 1 year ago
I just ordered an OnGard and now waiting for its shipment to UK.
trentonhibberd 1 year ago
How heavy is ongard? What is it made of?
Abdul97388 1 year ago
I just finished installing OnGard. It took me around 30 minutes. Very hungry now, finding food now :D
alvarorymer 1 year ago
installing the ez-armor thing is not easy, but installing OnGard is piece of cake.
SouleWalter 1 year ago
The gap between the floor and door is very small. I don't know if I can install ongard if the gap is about 1cm? If I can't, what can I do?
Tamani567 1 year ago
My neighbors find it strange when I install OnGard at the front door. They have no idea what that door brace is.
sherwoodhaneke12 1 year ago
Is it possible to install on a Marble floor?
KermitKraket 1 year ago
Can I call you for through-the-phone instruction if I can't install it?
MrSchmidtRyn 1 year ago
Installation made easy :D
khangilliam 1 year ago
It took me 45 minutes to install the jammer, but only 20 minutes to install OnGard.
barbonosunip 1 year ago
I will show this video to my brother. He bought the door brace but don't know how to install it.
clevelandhigginbotha 1 year ago
Ongard is light, its not as heavy as I thought.
Ferdinandoz1 1 year ago
Installing of Ongard is very very easy :) I was worried that I can't install, so now I relieve a bit of stress.
MrsCuningham 1 year ago
I also received my Door brace today. I wonder why there are 5 screws inside the box?
boylezoor 1 year ago
we supply an extra screw just in case a screw is damaged during the installation.
shattergard 1 year ago
I received my Ongard through speedpost and i needed only 30 minutes to install it.
TheWilliamson1 1 year ago
Nice! I love this video :))
NhanVienBanHang 1 year ago
I bought ongard because of this video. Do you believe it?
werockedyourocks97 1 year ago
Yeah! I just ordered OnGard through Amazon at $139
MovieTrailers007 1 year ago
At first I think it's a little strange, but after knowing how much work and effort you had put in the videos, I really appreciate your work! OnGard brings me PEACE!
wilbertbalk99 1 year ago
Not only this, but I love all videos in this channel.
MyHawkins02 1 year ago
This video is awesome! I can't wait to buy !! :)
oakley1a 1 year ago
I can't wait to buy OnGard, if it's available online.
TheStana23 1 year ago
amazon
shattergard 1 year ago
I heard that OnGard is made of polymer. is it hard or soft or like "jelly"?
oscarraudar71 1 year ago
very very strong- feels like steel
shattergard 1 year ago
I just seen this device for the first time. What OnGard used for?
babyblue1469 1 year ago
prevents door from being kicked in
shattergard 1 year ago
I can install ongard very easy, thanks to this video.
MrRyanRichards 1 year ago
A Bosch hammer drill is more expensive than OnGARD.
MrJohnston22 1 year ago
Thats is a very gooooooooood point
shattergard 1 year ago
I don't have the driller. Can I use the gel instead?
TurkeyXmas1 1 year ago
you must screw down into floor
shattergard 1 year ago
Just a quick question...What about if you live on your own and have to leave for work each day? You can set this thing when you leave the house can you? Otherwise you wouldn't be able to get back in...So am I right in assuming this is only good while you are at home in the house?
FeenixBlack 1 year ago
Great question- If you dont have a garage type door to exit--then you are correct. However the OnGARD could be utilized on all doors excluding the door you exit. Needless to say- many homeowners have a garage to exit from-but not all.
Thanks for your question
shattergard 1 year ago
The demo video is informative! Thanks a lot.
WOWPremium20080 1 year ago
How can I install it on my laminate flooring?
conraddagg369 1 year ago
So simple! Thanks for the video
ramonvodcka90 1 year ago
I bought OnGARD from my DIY, and I asked the staff there to install for me. Gave him tips for coffee.
rhettarendz818 1 year ago
How long is the warranty?
PerkinsDunn56 1 year ago
lifetime warranty
shattergard 1 year ago
I can install the door brace easily by following the video. What a great video!
KelleyAndrews 1 year ago
It's easy to install!
olypiacdome 1 year ago
I just ordered 1 set of OnGARD on Amazon.
yesintr69 1 year ago
I ordered 3 set yesterday. Amazon said they will be delivered in 5 working days. Looking forward to it!
jimmieshehorse091 1 year ago
How can I install on tile floor? I'm afraid the tile will be broken once I drill in.
WorldOfWarcraftRelea 1 year ago
We strongly suggestion having a professional install the ongard on tile etc
shattergard 1 year ago
Which type of glue do we use? How long do we need to wait until it fully functions?
CoolHudsonme 1 year ago
no glue needed
shattergard 1 year ago
Can it be installed on a concrete floor?
deandreshepley99 1 year ago
yes-please use a profesional to install
shattergard 1 year ago
I didn't count how long it took me to install it, because i took my time to do it. what i want to say is that installation is a no-brainer!
pcabo123 1 year ago
it's easy to install. Everything is explained clearly inside the box. The video is also a great help.
MrCunninghaml 1 year ago
i had a 15 year old try to break in my house.
ChildEmo96 1 year ago
This video must be distributed widely throughout the US.
cretchen09 1 year ago
My floor is concrete, can I install OnGARD?
RuizHarper 1 year ago
I would suggest having a professional install the brace on a tile or concrete floor
shattergard 1 year ago
I just got my OnGard Door Brace. installation is easy! I think my 15 years old son can intall it by himself.
karlablondel44 1 year ago
I just got my OnGard Door Brace. installation is easy! I think my 15 years old son can intall it by himself.
karlablondel44 1 year ago
So there is no glue on the lower part of the door brace?
gamessetone7 1 year ago
no screws into floor
shattergard 1 year ago
Thanks for the video. Installation now is a piece of cake.
MJCrazyDanceNow09 1 year ago
It took me 1 week to wait for delivery, 1 minute to receive the door brace and 10 minutes to install!
jodychancer43 1 year ago
It's easy to install!!! I can't believe that it's easy!
quynlyn 1 year ago
I've use OnGard for 3 months now and I must say it's a great product.
feltonrosalez733 1 year ago
Please tell your friends ;)
shattergard 1 year ago
I like that the product is very delicate with all small details are well taken care of.
SpencerGardner88 1 year ago
You should indicate this youtube link in the product box so that people can see the demo before actual installation.
TheElliott59 1 year ago
the video link is already on the box. :)
shattergard 1 year ago
I received the OnGard this morning. I will do the installation shortly thanks for your video.
tigresand1234 1 year ago
Thank you for the installation instruction. It saves me a lot of time.
SynderDuncun 1 year ago
Do I need to cut the door if there is no gap between the door and floor?
JacksonDanceABC 1 year ago
the installation is simple for a security product!
JourneyToThe 1 year ago
My friend is police officer and he swears by the OnGARD brace.
quynlyn 1 year ago
I live in the UK and cant wait to receive my OnGARD.
feltonrosalez733 1 year ago
Is the brace scratch resistant? I have children and pets.
SpencerGardner88 1 year ago
I had my locksmith install the brace because I have tile floors.
TheElliott59 1 year ago
Just got my OnGARD- no brainier installation. So simple!
tigresand1234 1 year ago
I would like to my 12 for Christmas. What is your best price each?
SynderDuncun 1 year ago
Can the OnGARD install on my garage door?
JacksonDanceABC 1 year ago
What is the warranty?
JourneyToThe 1 year ago
lifetime
shattergard 1 year ago
What is the OnGARD made of?
shasacool 1 year ago
How do you install on a concrete floor?
StephensPay 1 year ago
we suggest having a professional install on concrete or tile.
shattergard 1 year ago
How do you install on a tile floor?
sierramaragnos82 1 year ago
Can the OnGARD install on a carpet floor?
MultiWorldTraveller 1 year ago
yes- call if you have further questions
shattergard 1 year ago
I just visited my daughter at college and installed the OnGARD in her dorm room.
Charpman44 1 year ago
good thinking- spread the word for us.
Thanks :)
shattergard 1 year ago
No professional needed- my wife installed the OnGARD in 20 minutes.
keeshahassin45 1 year ago
I like that the box contains everything you need to install.
nowandthen1101 1 year ago
Wow- very easy installation.
MrHartCunningham 1 year ago