thanx bro for replying. I redid my pipes and the dealer did not use new crush gaskets and it was leaking at the rear head! They also stripped out my exhaust bolt heads. I fixed it and no popping at all on decel. Cheers and have a great week
@diver4818@diver4818 Thanx for the reply! I think i need to do the same thing. I tried programming my pciii myself and got it pretty close. A few dyno hours is just what i need. I think that will stop the little pops i have on decel. I looked at my baffles and they are welded in. The only replacement types i have found are straight pipes and for racing only. I am curious at to what you did baffle wise. Thanx again for taking the time to reply.
@rcjhouston After the Workshop dyno tune, ran great. I took the bike to a bike exhaust specialist & they hand made a couple of small baffles which they welded in. Can't see them & they took the rough edge off the sound. No ringing in the ears now.
hey bro, nice bike! I have the same pipes and i am running a PCIII. I still have slight popping on decel just under the 2K mark. (New gaskets, so no leaks there)
Did you do a custom map? if so, can you share with me. By the way, the video does not do these pipes justice. These pipes are SERIOUSLY LOUD! Almost too loud! Thanx in advance and nice bike
Had a Power Commander fitted by the Suzuki dealer and they mapped it on the Dyno - took about 3 hours. Tuned to the exhaust. Runs like a dream - no popping. I had small baffles put in the pipes to take the edge off it. Used to give me a headache.
@diver4818 Thanx for the reply! I think i need to do the same thing. I tried programming my pciii myself and got it pretty close. A few dyno hours is just what i need. I think that will stop the little pops i have on decel. I looked at my baffles and they are welded in. The only repalcement types i have found are straight pipes and for racing only. I am curious at to what you did baffle wise. Thanx again for taking the time to reply.
@diver4818@diver4818 Thanx for the reply! I think i need to do the same thing. I tried programming my pciii myself and got it pretty close. A few dyno hours is just what i need. I think that will stop the little pops i have on decel. I looked at my baffles and they are welded in. The only repalcement types i have found are straight pipes and for racing only. I am curious at to what you did baffle wise. Thanx again for taking the time to reply.
@diver4818@diver4818 Thanx for the reply! I think i need to do the same thing. I tried programming my pciii myself and got it pretty close. A few dyno hours is just what i need. I think that will stop the little pops i have on decel. I looked at my baffles and they are welded in. The only replacement types i have found are straight pipes and for racing only. I am curious at to what you did baffle wise. Thanx again for taking the time to reply.
Nice Ride. Real nice ride. This bike would toast any Harley except maybe the V-Rod. But you don't buy a Harley to go fast. To the guy who implies a Harley is not dependable, please come back to the 2000's... not the 1980's. A Harley is as durable as any other bike on the road now.
Thinking about trading in my 2007 gsxr 1000 for one of these. I hope I don't miss the power at least you can go a lot further with out stopping I hope, always had sport bike
Thx for the reply , beautiful bike man , i think it looks mean & fast & i will 4 sure buy one , iam just hoping that in 09 they make the rims black :)
@JACKSONAXER i had a 2007 m109r and i also have a harley night train and the suzuki m109r will destroy the harley performance wise, but the vrod will give it a run.
thanx bro for replying. I redid my pipes and the dealer did not use new crush gaskets and it was leaking at the rear head! They also stripped out my exhaust bolt heads. I fixed it and no popping at all on decel. Cheers and have a great week
rcjhouston 1 year ago
This has been flagged as spam show
@diver4818 @diver4818 Thanx for the reply! I think i need to do the same thing. I tried programming my pciii myself and got it pretty close. A few dyno hours is just what i need. I think that will stop the little pops i have on decel. I looked at my baffles and they are welded in. The only replacement types i have found are straight pipes and for racing only. I am curious at to what you did baffle wise. Thanx again for taking the time to reply.
rcjhouston 1 year ago
@rcjhouston After the Workshop dyno tune, ran great. I took the bike to a bike exhaust specialist & they hand made a couple of small baffles which they welded in. Can't see them & they took the rough edge off the sound. No ringing in the ears now.
diver4818 1 year ago
hey bro, nice bike! I have the same pipes and i am running a PCIII. I still have slight popping on decel just under the 2K mark. (New gaskets, so no leaks there)
Did you do a custom map? if so, can you share with me. By the way, the video does not do these pipes justice. These pipes are SERIOUSLY LOUD! Almost too loud! Thanx in advance and nice bike
rcjhouston 1 year ago
@rcjhouston
Had a Power Commander fitted by the Suzuki dealer and they mapped it on the Dyno - took about 3 hours. Tuned to the exhaust. Runs like a dream - no popping. I had small baffles put in the pipes to take the edge off it. Used to give me a headache.
diver4818 1 year ago
@diver4818 Thanx for the reply! I think i need to do the same thing. I tried programming my pciii myself and got it pretty close. A few dyno hours is just what i need. I think that will stop the little pops i have on decel. I looked at my baffles and they are welded in. The only repalcement types i have found are straight pipes and for racing only. I am curious at to what you did baffle wise. Thanx again for taking the time to reply.
rcjhouston 1 year ago
This has been flagged as spam show
@diver4818 @diver4818 Thanx for the reply! I think i need to do the same thing. I tried programming my pciii myself and got it pretty close. A few dyno hours is just what i need. I think that will stop the little pops i have on decel. I looked at my baffles and they are welded in. The only repalcement types i have found are straight pipes and for racing only. I am curious at to what you did baffle wise. Thanx again for taking the time to reply.
rcjhouston 1 year ago
This has been flagged as spam show
@diver4818
@diver4818 @diver4818 Thanx for the reply! I think i need to do the same thing. I tried programming my pciii myself and got it pretty close. A few dyno hours is just what i need. I think that will stop the little pops i have on decel. I looked at my baffles and they are welded in. The only replacement types i have found are straight pipes and for racing only. I am curious at to what you did baffle wise. Thanx again for taking the time to reply.
rcjhouston 1 year ago
Nice Ride. Real nice ride. This bike would toast any Harley except maybe the V-Rod. But you don't buy a Harley to go fast. To the guy who implies a Harley is not dependable, please come back to the 2000's... not the 1980's. A Harley is as durable as any other bike on the road now.
joewg3 1 year ago
the bike is soo beautiful damn
kuliwuli 2 years ago
i have the same pipes, but little longer:)
Svoby23 2 years ago
SWeeeeet Bike !!!!
pancreas4online 2 years ago
Beautiful bike and sounds great!
tuber188 2 years ago
Harley is fucking not durable, Its only name.
psychodemonic333 2 years ago
beautie
magerofl 2 years ago
it will deffinitely beat a harley. harleys are for wonna bees man. trust me. they are not worth the money.
bodybum 3 years ago 2
This comment has received too many negative votes show
load of shit, my v-rod could smoke that .
adrian123410987 2 years ago
dude seriously v rod is not for speed........its just fucking classic .......both rock
techadd123 2 years ago
Comment removed
bodybum 3 years ago
...where you from? let's race and find out.
Gershqui 3 years ago
Thinking about trading in my 2007 gsxr 1000 for one of these. I hope I don't miss the power at least you can go a lot further with out stopping I hope, always had sport bike
bigbacala 3 years ago
Will this bike beat a Harley in a race??
JACKSONAXER 3 years ago
I've owned 3 Harleys & they wouldn't see which way this bike went.
diver4818 3 years ago
Thx for the reply , beautiful bike man , i think it looks mean & fast & i will 4 sure buy one , iam just hoping that in 09 they make the rims black :)
JACKSONAXER 3 years ago
@JACKSONAXER i had a 2007 m109r and i also have a harley night train and the suzuki m109r will destroy the harley performance wise, but the vrod will give it a run.
bajabilly2004 1 year ago
@JACKSONAXER Yes.
bathwhoreE 1 year ago
@JACKSONAXER Short answer.Yes.
bathwhoreE 1 year ago
Hey! What model exactly are those piepes ?
denisiaczek 3 years ago
"Hardkrome Strippers from US."
diver4818 3 years ago
thanks for the feed back trying to get my hands on a m109r looking for pipes too put on when i get one
051802NM 3 years ago
are they just bolt on or did you have to mess with the fuel injection
051802NM 3 years ago
Bolt on & fitted a Power Commander
diver4818 3 years ago
Do you live in Springfield, QLD?
suzmot 3 years ago
Redland Bay
diver4818 3 years ago
those pipes sound quiet.. i know the videos never do the pipes justice. are those pipes pretty loud? mine are way louder than they sound on youtube
freestylecagefighter 3 years ago
Yes they are much louder than they sound here.
diver4818 3 years ago