Yes, I'm aware and I agree it's pretty cool to experiment with. For the purposes of this demonstration, it was far easier to just switch on the Wii than make a makeshift sensor bar.
I should say that I normally don't use the Wii remote as a pointer device for the computer. Rather, I mostly just use the remote/classic controller combo when running emulators.
Many people don't realise that the WiiMote sends signals to the PC / Wii via bluetooth, and not the sensore bar.... In fact, the "Sensor Bar" is not actually a sensore, mearely 2 infra-red emitters. The WiiMote then acts as an Infra-Red camera, and it uses the triangulation of the 2 infra-red signals for depth perception / movement, as it crosses the beams, and then it emits the signals of the movement back to the computer via Bluetooth, so infact, the sensor bar is an emittor not a sensor.
This is really good, but you don't need a Wii to do this, plus it will work with any pc (or Mac) with bluetooth.
All you need is a WiiMote, a computer with a bluetooth connection or dongle, and some software. You do not need a Wii Sensor Bar, all you need is 2 infra-red emitters (like laser pens, but they emit infra-red instead). These must be placed apart, say, either side of your monitor / tv. Many people don't realise that the WiiMote sends signals to the PC / Wii via bluetooth, and is....
WHEN U R READING THIS DONT STOP OR SOMETHING BAD WILL HAPPEN MY NAME IS SUMMER I AM 15 YEARS OLD i have BLONDE HAIR , SCARS no NOSE OR EARS I AM DEAD IF U DONT COPY THIS JUS LIKE FROM THE RING COPY N POST THIS ON 5 MORE SITES OR I WILL APPEAR ONE CREEPY NIGHT WEN UR NOT ExPECTING IT BY YOUR BED WITH A NIFE AND KILL U THIS IS NO JOKE SUMMET ING GOOD WILL HAPPEN TO U IF YOU POST THIS ON 5 MORE FLASH BOXES
Sorry, I didn't notice you used HDMI. What I posted works for VGA, but you may be able to adjust the image similarly with HDMI (I haven't used it on my TV, as of yet).
It's meant to adjust display frequency, but it has the added bonus of stretching the image horizontally. You can use image position to try and eliminate the border n the left side afterwards. It'll never be perfect, however.
hey - i have the same tv - samsung 40" - how are u conneting the mac to the tv? i use dvi to hdmi cable however the resolution doesnt fillthe full screen and i get black borders. did u have the same problem?
I use a software called Darwiin Remote. Once you have it installed, it's just a simple matter of syncing the remote and configuring the controls. The Wii has to be powered on to use the sensor bar.
Is the wii remote vibrating?
You should calibrate more functions to the buttons, like scroll up and down with the d-pad, and itunes play control mapping.
jrtaylor559 2 years ago
Yes, I'm aware and I agree it's pretty cool to experiment with. For the purposes of this demonstration, it was far easier to just switch on the Wii than make a makeshift sensor bar.
I should say that I normally don't use the Wii remote as a pointer device for the computer. Rather, I mostly just use the remote/classic controller combo when running emulators.
cynicalvectorboson 3 years ago
Infra-Red emitters are available for just a few pence (UK money). In the USA, they probably cost aroun $0.50 each, but I am not sure.
Try it out yourself, it's cool, and then post some videos up here of what you thought of it.
93gummers 3 years ago
Many people don't realise that the WiiMote sends signals to the PC / Wii via bluetooth, and not the sensore bar.... In fact, the "Sensor Bar" is not actually a sensore, mearely 2 infra-red emitters. The WiiMote then acts as an Infra-Red camera, and it uses the triangulation of the 2 infra-red signals for depth perception / movement, as it crosses the beams, and then it emits the signals of the movement back to the computer via Bluetooth, so infact, the sensor bar is an emittor not a sensor.
93gummers 3 years ago
This is really good, but you don't need a Wii to do this, plus it will work with any pc (or Mac) with bluetooth.
All you need is a WiiMote, a computer with a bluetooth connection or dongle, and some software. You do not need a Wii Sensor Bar, all you need is 2 infra-red emitters (like laser pens, but they emit infra-red instead). These must be placed apart, say, either side of your monitor / tv. Many people don't realise that the WiiMote sends signals to the PC / Wii via bluetooth, and is....
93gummers 3 years ago
This has been flagged as spam show
WHEN U R READING THIS DONT STOP OR SOMETHING BAD WILL HAPPEN MY NAME IS SUMMER I AM 15 YEARS OLD i have BLONDE HAIR , SCARS no NOSE OR EARS I AM DEAD IF U DONT COPY THIS JUS LIKE FROM THE RING COPY N POST THIS ON 5 MORE SITES OR I WILL APPEAR ONE CREEPY NIGHT WEN UR NOT ExPECTING IT BY YOUR BED WITH A NIFE AND KILL U THIS IS NO JOKE SUMMET ING GOOD WILL HAPPEN TO U IF YOU POST THIS ON 5 MORE FLASH BOXES
greendayJ7 4 years ago
Sorry, I didn't notice you used HDMI. What I posted works for VGA, but you may be able to adjust the image similarly with HDMI (I haven't used it on my TV, as of yet).
cynicalvectorboson 4 years ago
That shit what you writing here add to video description mate
nildurx 4 years ago
Setup > PC > Image Lock > Coarse
It's meant to adjust display frequency, but it has the added bonus of stretching the image horizontally. You can use image position to try and eliminate the border n the left side afterwards. It'll never be perfect, however.
cynicalvectorboson 4 years ago
hey - i have the same tv - samsung 40" - how are u conneting the mac to the tv? i use dvi to hdmi cable however the resolution doesnt fillthe full screen and i get black borders. did u have the same problem?
any help would be grearly appreciated! thanks!
evh9067 4 years ago
HOW DO U DO THAT i have a mac and a wii and i been trin so hard to connect them
solomaster20 4 years ago
I use a software called Darwiin Remote. Once you have it installed, it's just a simple matter of syncing the remote and configuring the controls. The Wii has to be powered on to use the sensor bar.
cynicalvectorboson 4 years ago