In your demonstration you say, at 2:08, ". . . and I have the built in flash set to just 'dashes' . . . " Is that correct? I cannot tell from the audio track. I have the D-300 and I don't fully understand what you mean, or what you are saying, although I understand you are using the built in flash to trigger the SB-800 remotely, with no other bridge from camera to remote flash other than a signal from the built in flash, set on "dashes". Please clarify. About to purchase an SB-900.
@Dunkerron That is correct. You can have the internal flash set to contribute to the "main flash" (i.e., set to TTL, where both the popup flash and external flash fire on exposure), or set to *only* fire the external flash (i.e., set to "- -", where the popup flash triggers the external, but does not fire during exposure).
yea, nope...the d40 does NOT have the i-TTL ability. ONLY the d50-70-70s-200-and onward have that ability. None of the newer consumer models have that.
All modern nikon dslrs are i-TTL capable, but not all of them can function as a commander for wireless units. I think that's what you mean. However, if you pop on a sb800, sb900, or metz 58 you can use the cheaper ones as a commander in the CLS system.
BTW: the D50 hasn't got a commander mode, its flash capabilities are the same as D40.
I really think this is a very helpful video so thank you very much. I am wondering what lens you are using. Is it the 18-200 ? and what is the macro capability of it like, if it is that lens. Thanks
Don't forget that the Nikon F6 (Nikon's greatest film camera) is also able to work with CLS. Check out the new SB900. The interface is much simpler and it can plug into a pc for firmware updates.
Very nice, straight forward example. I was always confused as to whether using the popup flash in this case would contribute to the flash - thanks for explaining that!
The setup would be roughly the same. Essentially you would need to position the lights (as you suggest) and then set both SB-800's to "remote", and either let them fire in TTL mode or adjust the power individually in the on-camera settings. If you explain exactly what you're looking for, I can try to put something together.
I think the pop up flash does fire, but the shutter is not open when it fires, and the only purpose of it is to tell the SB-800 to fire. The shutter only opens when the SB-800 fired.
There are different settings for this. In my example, the pop up flash fires to trigger the SB-800. However, you can have the on-board flash fire during the exposure as well. This can be adjusted in the camera flash menu where you set the SB-800 to fire in TTL mode.
Thank you! I have the Fuji S5 and SB800 and I had been trying to understand how to use the SB800 remotely. I'm going home to try it tonight. Thank you again!
Just a follow-up. Thanks again for your video, I could see what I couldn't comprehend by reading my manual. I was able to set it up and used it Saturday afternoon with a senior shoot and I'm thrilled with how beautifully it worked!
I'm planning on doing another tutorial (probably macro) when I get some time. You can do this with either SB-800's or 600's, though the procedure is slightly different with the SB-600 (control layout is slightly different). You can use an SB-800 on a D40 to control additional SB-800's or SB-600's as well.
Nice Job! One reason for my buying my D200 but couldn't figure out the damn manual on how to make it work. Read for over an hour and withing minutes of watching your video, I took my first shot!
Do ya have any more demonstration videos? How about some Macro help? Which lens for best head/shoulders, 3 key light etc?
I'll try to do a basic long exposure night setup. What exactly do you mean by a basic portrait setup? As far as lighting, you could use the same equipment and same setup as was posted in this video, simply with a backdrop and moving the light a bit further away from the subject. I can try to dig up a model sometime and see if I can put something together, though.
Thanks dude. I just bought a D200. My old SB-80DX will not work on TTL with this camera. So, I've got another reason to buy the SB-800 now. To try out the CLS!!!!
Sync speed was 1/250, and I believe f16. In principle any you could have done it at 1/125 or any other aperture as well, these just happened to be the settings I chose. Obviously syncing at 1/250 allows you to be a bit more shaky, and in the situation described the strobes are providing all of your light anyway, so ambient doesn't matter.
Excellent presentation! I am sure a similar quality presentation on NIGHT photography in the city will be enjoyed by all. From street level in front of store windows to the tallest steeple in town.
I am sure any subject you present/share of this quality will be enjoyed and experience gained by all.
In your demonstration you say, at 2:08, ". . . and I have the built in flash set to just 'dashes' . . . " Is that correct? I cannot tell from the audio track. I have the D-300 and I don't fully understand what you mean, or what you are saying, although I understand you are using the built in flash to trigger the SB-800 remotely, with no other bridge from camera to remote flash other than a signal from the built in flash, set on "dashes". Please clarify. About to purchase an SB-900.
Dunkerron 4 months ago
@Dunkerron That is correct. You can have the internal flash set to contribute to the "main flash" (i.e., set to TTL, where both the popup flash and external flash fire on exposure), or set to *only* fire the external flash (i.e., set to "- -", where the popup flash triggers the external, but does not fire during exposure).
jwischka 4 months ago
and what's about the Nikon D3100 ?
Matasm 1 year ago
is this possible with the d70?
willcitoman97 1 year ago
Excellent video.
eha1990 1 year ago
What lens are you using on this video?
CGCabrera 1 year ago
Good Video..Very helpful
billbarton63 1 year ago
thanks a lot dude, this video helps......
mohdkairul 2 years ago
and Í would highly recommend putting a blank piece of paper under the page you are shooting
TzumB 2 years ago
yea, nope...the d40 does NOT have the i-TTL ability. ONLY the d50-70-70s-200-and onward have that ability. None of the newer consumer models have that.
fozzyprozac 2 years ago
All modern nikon dslrs are i-TTL capable, but not all of them can function as a commander for wireless units. I think that's what you mean. However, if you pop on a sb800, sb900, or metz 58 you can use the cheaper ones as a commander in the CLS system.
BTW: the D50 hasn't got a commander mode, its flash capabilities are the same as D40.
teundilles 2 years ago
where did you order your umbrella and flash stand for the sb-800 from? o and great video
officefan777 2 years ago
Is this possible with a d90?
I'm about to buy a DSLR and THIS is a reason for me to go for a Nikon, as the Canon ST-E2 costs additional 200€.
Beatbot 2 years ago
Yes, this is possible on a D-90
jwischka 2 years ago
Dear jwischka,
I really think this is a very helpful video so thank you very much. I am wondering what lens you are using. Is it the 18-200 ? and what is the macro capability of it like, if it is that lens. Thanks
Mrbiggerjobs1000 2 years ago
This particular day I was shooting with a Sigma 150mm Macro lens. I don't know anything about the macro capability of the 18-200.
jwischka 2 years ago
The Europeans and Japanese can pronounce Nikon however they want. But in English, saying "nih kon" is a mispronunciation.
As the first poster said, "the double p makes the i short" in the word "Nippon." That's correct Japanese and also correct English.
But there is no double "k" in Nikon. Therefore, in *English*, it's pronounced NIEkon. Ask any English teacher.
By the way, "Japs" is considered a racist term, at least here in the USA. Peace. Out. ;)
etherize 2 years ago
you guys are wacko, who cares NEEKON NYEKON NIPPON, lol who cares, we know what you mean.
Recon9143 2 years ago 7
have a look at my video regarding Nikon not Naikon, tell me what you think as i cant understand your point in spelling.
dombower 2 years ago
NIce video.
BUT when will the Americans learn to pronounce Nikon properly
The Ni comes from Nippon, (Nippon Kōgaku) the double pp makes the i short not long like a Y . It is Ni Kon not NY Kon.
tipptoggy 2 years ago
loser
boiboi5 2 years ago
Yes, if it were spelled with two "k"s ("Nikkon"), it would be pronounced "Nih-Kon." Just as "Nippon" with two "p"s has a short i.
But it is spelled "Nikon" with one "k"; therefore the i is long.
That's basic English, which believe it or not, we Americans do speak. ;)
etherize 2 years ago
but the Japs, who CREATED Nikon, pronounce it with a short "i".
even the Euros use the short "i" sound.
still, the long "i" isnt that bad.
peace. :)
spongebens 2 years ago
So were can i buy a CLS at online mostly?
Shain7 3 years ago
d40 doesnt have CLS. good video tho.
smiles77 3 years ago 4
Good video, informative and no extra garbage.
The way youtube ought to be. :)
sovietspyguy 3 years ago 3
the Bible. Great choice!
You should read Judges it's actually very funny
Pizzscn 3 years ago
Don't forget that the Nikon F6 (Nikon's greatest film camera) is also able to work with CLS. Check out the new SB900. The interface is much simpler and it can plug into a pc for firmware updates.
ChicoEdge 3 years ago
firmware update is not over pc, its over a d700 or d3
chrissowa 3 years ago
Very nice, straight forward example. I was always confused as to whether using the popup flash in this case would contribute to the flash - thanks for explaining that!
hobocamp 3 years ago
Can you do a video on a two flash setup, one a key light and the other a fill light, with umbrella?
thanks
pannysat 3 years ago
The setup would be roughly the same. Essentially you would need to position the lights (as you suggest) and then set both SB-800's to "remote", and either let them fire in TTL mode or adjust the power individually in the on-camera settings. If you explain exactly what you're looking for, I can try to put something together.
jwischka 3 years ago
Another sweet presentation and clarification for the "manual(ly) confused"
So the pop up flash did not fire though it was up?
Thanks
bbtel 3 years ago
I think the pop up flash does fire, but the shutter is not open when it fires, and the only purpose of it is to tell the SB-800 to fire. The shutter only opens when the SB-800 fired.
0zgon 3 years ago
There are different settings for this. In my example, the pop up flash fires to trigger the SB-800. However, you can have the on-board flash fire during the exposure as well. This can be adjusted in the camera flash menu where you set the SB-800 to fire in TTL mode.
jwischka 3 years ago
Thanks for this informative demonstration. I am wondering, would one go about setting the pop-up flash to "dashes"?
lbarnesphoto 3 years ago
"Dashes" will cause the on board flash to not contribute to the exposure. On any other setting, the on board flash will contribute to the exposure.
jwischka 3 years ago
Thank you! I have the Fuji S5 and SB800 and I had been trying to understand how to use the SB800 remotely. I'm going home to try it tonight. Thank you again!
joannphoto 3 years ago
Just a follow-up. Thanks again for your video, I could see what I couldn't comprehend by reading my manual. I was able to set it up and used it Saturday afternoon with a senior shoot and I'm thrilled with how beautifully it worked!
joannphoto 3 years ago
what setting did you set the pop-up flash so it won't contribute any exposure to the subject and it will only trigger the external flash..??? thanks
nikkiesteban 4 years ago
You simply need to move it to "--"
jwischka 4 years ago
Cool... Nice setup and all.
LuminolBlue 4 years ago
Thank´s for sharing!!!
Neipasmaharba 4 years ago
Great Tutorial! This feature if one if the biggest reasons I made the switch from Canon.
pthedevil 4 years ago
Yes, you could.
jwischka 4 years ago
I hate reading manuals... thank you so much. You opened up a new world for me. Please post more tutorials.
PS can I do this with 3 sb-800? Can I use SB - 600's?
GarlandImages 4 years ago
I'm planning on doing another tutorial (probably macro) when I get some time. You can do this with either SB-800's or 600's, though the procedure is slightly different with the SB-600 (control layout is slightly different). You can use an SB-800 on a D40 to control additional SB-800's or SB-600's as well.
jwischka 4 years ago
No - you need a D80 or an SB-800 (on the D40) to control the SB-600.
jwischka 4 years ago
Nice Job! One reason for my buying my D200 but couldn't figure out the damn manual on how to make it work. Read for over an hour and withing minutes of watching your video, I took my first shot!
Do ya have any more demonstration videos? How about some Macro help? Which lens for best head/shoulders, 3 key light etc?
floorit929 4 years ago
is there a way to synca my D200 on board flash with a D40 on board flsh?
telefender 4 years ago
No - you cannot sync a camera flash with another camera flash.
jwischka 4 years ago
oh nvm...lol thought it was...haha
jkr911 4 years ago
yeah...it is a sig. 70-200
jkr911 4 years ago
I'll try to do a basic long exposure night setup. What exactly do you mean by a basic portrait setup? As far as lighting, you could use the same equipment and same setup as was posted in this video, simply with a backdrop and moving the light a bit further away from the subject. I can try to dig up a model sometime and see if I can put something together, though.
jwischka 4 years ago
Is that a Sigma 70-200 f/2.8? what is that lens?
warrock556 4 years ago
That was a Sigma 150 2.8 macro
jwischka 4 years ago
You should make another, it is very helpful.
xBloodoathxOutlawx 4 years ago
Dude - Thanks for the demo! Very clear - easier than the Nikon book!
sitdownbackthere 4 years ago
Thanks dude. I just bought a D200. My old SB-80DX will not work on TTL with this camera. So, I've got another reason to buy the SB-800 now. To try out the CLS!!!!
seikocriteria 4 years ago
Sync speed was 1/250, and I believe f16. In principle any you could have done it at 1/125 or any other aperture as well, these just happened to be the settings I chose. Obviously syncing at 1/250 allows you to be a bit more shaky, and in the situation described the strobes are providing all of your light anyway, so ambient doesn't matter.
jwischka 4 years ago
Please share what the shutter speed was set to on the camera (sync speed 1/125 or 1/250?). Very nice tutorial!
Debbi
DebbiinCalifornia 4 years ago
Excellent presentation! I am sure a similar quality presentation on NIGHT photography in the city will be enjoyed by all. From street level in front of store windows to the tallest steeple in town.
I am sure any subject you present/share of this quality will be enjoyed and experience gained by all.
MIGuy 4 years ago
I typically don't use flash during my long exposures, though I could do a tutorial on night photography.
As far as basic portrait stuff... Perhaps when I get a model back in the fall :).
jwischka 4 years ago
Why not make simple demostration of flash + long exposure night time photography? xD
Sealights 4 years ago
I'd be happy to make another...
Any ideas for one?
jwischka 4 years ago
How about a basic portrait setup? The issue is with lighting placement using the same setup...outdoors, indoor, etc.
smoker967 4 years ago
High speed sync! High speed sync!
mattblack77nz 4 years ago
I was shooting with the Sigma 150mm macro.
jwischka 4 years ago
Pretty kool! thanks for sharing. What lense was on your camera by the way?
Robertinc 4 years ago