so what should i do sand it down? i seen some people use rubbing alchol 2 dry up the cast? an i have a tippmann a5 an i also have that pcs5 that u spray
just use a high grit sandpaper and then use the rubbing alcohol but make sure you let it dry for like 8 hours. then the paint will stick to anything and will most likely not chip after a few coats of clear coat matte finish... but make sure its matte
You can use 500 dry sandpaper, Not any finer than that then the paint wont stick, And after use silicone remover (Used for paint job's on cars)Then blow it dry, Thats how i did on my x7 and final results were great.
its a bit too shiny and you shouldn't have done all the parts of the marker
SpikedGuru 3 years ago
I would just recommend some gun tape man. If you get military grade it's not sticky it's more like a mix of velcro and fiberglass.
xxReconRickxx 4 years ago
sic looking
crusdare42m 4 years ago
hey i no y your paint keeps shiping its the chrom or relly smooth paint on your guns that cases that
svddragunav 4 years ago
so what should i do sand it down? i seen some people use rubbing alchol 2 dry up the cast? an i have a tippmann a5 an i also have that pcs5 that u spray
MOSTHATED183rd 4 years ago
just use a high grit sandpaper and then use the rubbing alcohol but make sure you let it dry for like 8 hours. then the paint will stick to anything and will most likely not chip after a few coats of clear coat matte finish... but make sure its matte
jman7t 4 years ago
You can use 500 dry sandpaper, Not any finer than that then the paint wont stick, And after use silicone remover (Used for paint job's on cars)Then blow it dry, Thats how i did on my x7 and final results were great.
xaejt 3 years ago