Your video is nearly complete but you did not show the viewer how to install the cables from the case to the motherboard (such as power, reset, or usb). Although your video was quick, it wasn't thourough enough for a beginner to understand. I already know how to build a computer a few days ago. I learn it from newegg tutorial (building a computer). Anyway, good video though.
@anto1122 Very simple; you can just apply it in a straight line going down the center of the CPU once it's been installed into the motherboard. Don't use too much, though. Thanks for the subscription and a happy new year to you as well :-)
Very Nice, but its actually recommended that if your doing a complete build that you install your ram and processor before you install them into the chassis
@sidewaysfilmz You can get RAM clocked at 1866MHz and your board will take it just fine. That's basically saying that if you get 1600MHz RAM you can overclock it to 1866MHz (if, of course, your CPU supports it and your DIMMS can handle it). But if you get RAM clocked at 1800MHz the motherboard may drop the speed to 1600MHz if you don't overclock it to 1866MHz. Main thing - just get RAM with the speeds your motherboard can support (whether it says "OC" or not).
fucking fantastic job explaining everything. I know a lot about computers, so I knew what to do from the beginning but, for others, this will help soo much. Great Job yet again!
@heavymtal94 Thanks so much, bro! After spending 18+ hours on this series and pulling a couple all-nighters that's great to hear. Definitely been wanting to come out with this series for a while now; glad the time has finally come :-)
could this run bf3 or crisis on max settings
fluffydude56 3 weeks ago
@fluffydude56 lol of course it can...its a 1400 $ pc...
TheGhostshadow95 2 weeks ago
@TheGhostshadow95 lol
fluffydude56 2 weeks ago
@buyfu Around $1,300USD but this was during the holiday season so almost everything was on sale. Currently it would probably cost $1,400 - $1,500.
iPT2gGeec 1 month ago
Your video is nearly complete but you did not show the viewer how to install the cables from the case to the motherboard (such as power, reset, or usb). Although your video was quick, it wasn't thourough enough for a beginner to understand. I already know how to build a computer a few days ago. I learn it from newegg tutorial (building a computer). Anyway, good video though.
ulgk 1 month ago
awesome tutorial mate, cheers!
takeyourpillz 1 month ago
Great video tutorial :D
Makaveli456 1 month ago
@anto1122 Very simple; you can just apply it in a straight line going down the center of the CPU once it's been installed into the motherboard. Don't use too much, though. Thanks for the subscription and a happy new year to you as well :-)
iPT2gGeec 2 months ago
Also, what are your methods on applying thermal paste?
anto1122 2 months ago
Very clear and helpful, subscribed and happy new year.
anto1122 2 months ago
Very Nice, but its actually recommended that if your doing a complete build that you install your ram and processor before you install them into the chassis
1995billy 2 months ago
@1995billy You're right. I just thought that it might be easier to do it the way that I did for filming purposes.
iPT2gGeec 2 months ago
Great vid, extremely helpful. I've seen on motherboards it says for example: 1333mhz, 1600mhz, 1866 (OC), ect
If i get ram with 1866 how would i over clock to make it run with it?
sidewaysfilmz 2 months ago
@sidewaysfilmz You can get RAM clocked at 1866MHz and your board will take it just fine. That's basically saying that if you get 1600MHz RAM you can overclock it to 1866MHz (if, of course, your CPU supports it and your DIMMS can handle it). But if you get RAM clocked at 1800MHz the motherboard may drop the speed to 1600MHz if you don't overclock it to 1866MHz. Main thing - just get RAM with the speeds your motherboard can support (whether it says "OC" or not).
iPT2gGeec 2 months ago
@iPT2gGeec Thanks I thought it was saying you overclock the motherboard to be able to have that speed of ram. :D Thanks a lot for clearing that up.
sidewaysfilmz 2 months ago
Hardest part is hardware matching... but then its not that hard.... GREAT VIDEO BTW
CMNDR7PVT7PARTS 2 months ago
@CMNDR7PVT7PARTS That's 100% correct. Thanks for the support!
iPT2gGeec 2 months ago
Like a boss?
mangoman 2 months ago
@mangoman Liek A BAWSS.
iPT2gGeec 2 months ago
good explanation dude cant wait to build one in the future!
lakakid 2 months ago
@lakakid It's a great learning experience!
iPT2gGeec 2 months ago
fucking fantastic job explaining everything. I know a lot about computers, so I knew what to do from the beginning but, for others, this will help soo much. Great Job yet again!
heavymtal94 2 months ago
@heavymtal94 Thanks so much, bro! After spending 18+ hours on this series and pulling a couple all-nighters that's great to hear. Definitely been wanting to come out with this series for a while now; glad the time has finally come :-)
iPT2gGeec 2 months ago
This has been flagged as spam show
good job man !!
RDTatel 2 months ago
This has been flagged as spam show
good job man !!
RDTatel 2 months ago
good job man !!
RDTatel 2 months ago