XF200 JP/FMF CUSTOM EXHAUST PIPE

[ibrmmh]

Hey I have the same bike with tons of mods what engine,intake or other mods have you done

[shoeyvoice]

I have this bike in the uk where can I get the pipe from?

[shannontheguy]

I'm thinking about buying this bike, do you recommend this for my first bike?



[gronet75]

hey flybywifi ,,im getting the same bike ,,and where did you get brake light ? i want to change the fat big one who comes from factory,,,thank s

[rudiferia]

This is fmf 2 for motor 2t , no 4t !!!!!!!!!!!!!

[midgarzolon]

Would it be difficult to change the rear brake for a disk system?

[gilessmokey]

@midgarzolon yes but i have done such a conversion. you would need new wheel with disc,caliper, hose, master cyl and brake pedal.and you would have to cut and weld and fabricate. but what for?drum brake is fine especially on the rear.

[everlast246]

heyy man nice bike quick question is there anything else i could do to that bike besides what you have done already

[gamerbot101]

dats a sexy bike

[5010246]

I live in CA also and found one for $1500 with 4k miles what do you think? also is there anything I should look for when checking out to make sure its not messed up???

[achmed316]

hi what exhaust is that? or whats the website u ordered from plz thanks

[defoliatedMYmaple]

Decent? I wouldn't trust that thing on the street above 30mph...  It might pop into reverse and send you over the bars. Buy a KlX250s, Dr200, Xt225, Crf230l, or a wr250. Your life is worth more than that!!!

[roliff123]

my RMR is flying along at near 120mph with a pro circuit exhaust.

they are the way forwards.. honestly. =)

[Greg10069]

ok i hope you can get back to me soon because im buying a XF200 in two days, i want to know what your top speed was before you did all your mods to it i have to drive around 60mph to work and it would be nice if i knew if i could get up there

[flybywifi]

@Greg10069 You will have no problem doing 60 with the stock bike. I upgraded the front and rear sprockets to 15 and 44. That will give you more top end. I ordered mine from JP motorsports in San Diego. Call up Smitty. He will take care of you. I recently talked to him about going to 42 on the rear so he may have those available now too.

[ryanthie]

Wow, a two stroke exhaust. Nice.

Doesn't sound bad.

[jayjay12556]

@ryanthie umm 2 strokes are way louder and 2 strokes arent aloud on the road because of pollution

[ryanthie]

It's a two stroke EXHUAST. It says Turbine Core 2. 2 for 2 stroke. I have the same silencer on my KX250. And actually 4 stroke dirt bikes are louder than 2 stroke dirt bikes except at idle points. I have a KX450F and a KX250 the 450 over powers the 250 in how loud it is. I didn't say the bike was a two stroke. I also own a two stroke that is street legal. Yamaha DT175 fully street legal 2 stroke.

[triga2k9]

@jayjay12556 bollox mate

[BR4DL3YY]

this bike is a 4 stroke

[ryanthie]

Read my comment. It has a two stroke EXHAUST. I know the difference of two and four stroke. The exhaust is for a two stroke.

It's a Turbine Core 2 Silencer. I have one on my KX250.

And if you read the comment I left responding to jayjay12556 I explained this already.

[BR4DL3YY]

i was just saying so other people dont get mixed up with the bike and the exhaust.

[kreidlergermany]

where can i buy it ?

[crapshorts]

more then half this bike is susuki same engine its made in japan i beleave

[WiredMotorhead]

I'm thinking of getting this bike as my 1st. Anyone got anything good or bad to say about it? Thanks :-D

[ferhanbolukbasi]

Good bikes i got a 125 version my self and goes well and good fuel looks like a big bike too most people expect it to b a 450 to 600

[pcjt66yt]

yeah dont what ever you do i bought a chinese bike and with in 2 months i spent 1k keeping it working if i was you look up a derbi gpr racing 125 youl love it

[clarissaexplainscunt]

yeah would be handy to know if these are restricted, i think youre probably right.

im keeping mine for at least 6 months so i want to make it a bit quicker before i see it go.

[gpimptannoy]

how much mph you got out of it?

[clarissaexplainscunt]

ive done 65mph on mine but ran out of road.

i reckon i could get to 70mph

i found a pro circuit full exhaust for this but dont know if its any good, does anyone know anything about it?

[IP1NKYI]

i think the Superbyke RMR125, Q-Link etc are electronically restricted to 65mph.

[vicdeluca71]

I think are right about this.Did you read this somewhere?if so can you foward me the link?...I just bought an xp200 and my friend has the same bike except he lives in South america.He tells me there must be some kind of Gov system because his bike easily does 80mph plus no problem...I would like to know for sure and find a way to remove this

[IP1NKYI]

I dont know how to remove it, but i know a few people who have done loads to thier bike to make it go faster but all it did was improve the 0 - 65 time. As soon as it gets to 65mph it stops accelerating.

i'll keep looking because one ive run mine in i will proberly want a little more out of it.

[clarissaexplainscunt]

hey i have a superbyke rmr 125, but it looks identical to this bike.

can i fit this exhaust without many problems?

and is there any power gains i can look forward to?

[gpimptannoy]

what else can you do to de-restrict these bikes. cheers

[matt6238]

there might as well be a harley logo on that bike, because all you seem to care about are the looks and the way it sounds. I guess china has figured out how people that have no clue about bikes think. they should start making clone harleys too because the dirtbike stuff has gotten way out of hand

[Jaskoleo]

sounds awesome !!

[yooo2379]

I had one of those bikes...wish I knew about the pipe then. Best $2500 bucks I have ever spent!

[FretFreak02]

Is this a Chinese bike?

[milodaman2]

yeah. i can tell.

it's a shitload of nothing.

GO FOR KTM! TEAM ORANGE BITCH!

[FretFreak02]

Yeah I looked this bike up, it's totaly shit!! Better to spend a couple of bucks more on a KTM or a Husqvarna or something

[flybywifi]

a couple of bucks more? i think you need to go back to 3rd grade math class.

[FretFreak02]

It's a matter of speaking fool....

[gpimptannoy]

totally shit? thats funny u say that because thats exactly what i thought of your mothers sexual performance

[FretFreak02]

It's so funny to see people like you answer like that. You are so dumb the only thing you can come up with is things like ''your mother is this, your mother is that etc''. Please answer a comment normal or just shut up because you sound like an idiot at the moment =)

[gpimptannoy]

go wank ya nonce.

[FretFreak02]

.....and another clever comment =L

[kobi49]

lol still laughin now hahaha

[gpimptannoy]

who tha fucks talking to you boy?!

[kobi49]

i wasnt takin the piss i actually thought it was funny

[flybywifi]

anyone out there want this same pipe? go to my blog and click on "jp motorsports" and then click on "contact us" and get one shipped free to your house. jp motorsports also offers a front 16 tooth and a rear 44 tooth sprocket for this machine.

[Marko7272]

How do you shift gears on this bike? I mean like "standard" first down and the rest up? Thanks for the answer! Also, it's a hell of a sexy bike, seriously thinking of getting one too ;)

[flybywifi]

1 down 4 up.

[Georgenfla]

That exhaust system looks like an expansion chamber for a 2 stroke engine, not a 4 stroke.

[flybywifi]

ya it is for a 2 stroke. but it works great for this little thumper. i have put nearly 2000 miles on it now.

[flybywifi]

btw, so what. it werks great. slips on in less than 5 minutes. no drilling or welding.

[thegar9]

I agree, 2 stroke or not it looks and works great. To me a pipe is a pipe. BTW an expansion chamber is toward the front of the exhaust system not at the end of it. Just a clearification. I'm looking to purchase an XF200 very soon, thanks for your information.

[idkhaveaname1369]

Yea that is a nicer bike as far as looks go, the other bike would need the lame stickers removed, i have a mig welder, i just need to know what pipes were welded to what, i love that richer sound of the fmf!!! e

[flybywifi]

sorry bro. i dunno what model the other portion of the pipe is from.

[idkhaveaname1369]

I just bought that pipe at a yard sale, they are the best hop up for your bike!! did you notice better speeds? i'm trying to decide witch bike to get, a motard or a q link, both are 200cc theres a zong chen too butt it has street tires on it, what do you think? e

[flybywifi]

you mean the the qlink motard? you will love it. as far as that pipe you bought. it wont bolt up to the qlink. this one is custom. 2 pipes and mufflers cut and welded together. check out my blog to see what i mean. better performance and get up to speed faster with the pipe. the better top end speed came from the front sprocket swap to a 16 tooth.

[MontanaMikka]

hi guy. nice exhaust, i drive the same bike in germany. do you know if these muffler legal in europe? because the laws are here very hard...please answer

[flybywifi]

MontanaMikka, thank you for the compliment. you will love this pipe. it does conform to the 93db sound level here. just go easy in residential areas. will not change your emissions.