((im sure in the not only one thats has said but)) when you pull the bolt back and push the small green lever (Known as the "Holding open device") you dont pull upwards, there is a small black square on the oppisite side, when its held open push the small square down and it should release as it would do in real life
@KrazyWWeFan247 Well, I would've liked a more specific answer instead of simply dismissing the clone as inferior. By the way, you can't compare a Toyota to a Corvette because one is a car manufacturer and the other is a model of car. Besides, Toyota Supras of the '90s kick ass. Your analogy does not make sense.
@csmybuttt Ok...i'll try to be more specific...I cant tell you if this is a G&G clone, as i'm not 100% sure. I would ASSUME so though, as this gun has the blowback feature like the G&G. This gun has an electric blowback which will damage your piston over time, while the G&G has a pneumatic blowback system, which WONT damage your gearbox. As far as externals go, you know the G&G wins there. But it costs almost $400. So not an option if your on a budget. Was I specific enough this time? lol
@KrazyWWeFan247 How can you tell what kind of blowback it has? Also, I don't see anything funny in this situation, or has the meaning of 'lol' changed?
@csmybuttt Because I have seen several other reviews on this gun and they stated that it has an electric blowback system. The blowback mechanism is connected to the piston so every time the piston moves the bolt moves. This puts alot of stress on the piston and it will destroy your piston over time. But you can disable this feature if you know how. Like I said the G&G has a pnuematic blowback which uses the air inside the cylinder to move the bolt. This puts NO stress on you internals...
@csmybuttt No problem. One more thing...I just learned from a thread on airsoft retreat that this IS a full G&G clone with a STAMPED STEEL reciever. :)
Just one thing, on the real rifle, you wouldn't hit the bottom of the mag, it could dislodge the top round (in this case, the top BB) amd it could actually damage the magazine.
@UKRspartan it's a good gun. just you have to get used to it. only faults is, bb's get into the frame through the holes and its a bitch to take them out. along with the sticky mag problem, but other than that its a good gun.
Ha I use the real thing although I want one of these any tips on getting one in the UK?
bf3willparker 5 days ago
The missis just bought me one of these for xmas, cant wait to use it.......Dude are your thumbs broken?
onescenecinema 2 months ago
@ Mikeayitt I got through customs with 8 Cuban cigars in my pocket and an airsoft rifle in my luggage
D4MN4TI0N1 2 months ago
if i buy this ive heard that the piston isnt very strong so how do i disable the blowback????
kirbi55 5 months ago
((im sure in the not only one thats has said but)) when you pull the bolt back and push the small green lever (Known as the "Holding open device") you dont pull upwards, there is a small black square on the oppisite side, when its held open push the small square down and it should release as it would do in real life
sgtAeon 6 months ago
lol i like wen he fires it the carry handle moves backwards lol
97dmosley 8 months ago
Hi CRW airsoft, do you send the gun to England legally if i give you my UKARA number? when i do get the number.
ELITEclan100 10 months ago
Any UK buyers know if customs confiscated this from them when arrived in the UK?
Mikeayitt 10 months ago
@Mikeayitt I ordered this rifle from CRW About a year ago, I live in the UK. It's all good, I highly recommend it.
tuffin10 1 month ago
@Mikeayitt ive heard there is a dismantle proccess which they can do so that you dont need a UKARA as they send it in two parts
UKRspartan 1 week ago
Comment removed
Mikeayitt 10 months ago
If you plan on buying this gun I highly recomend you disable the blowback. If you dont you can kiss your piston goodbye.
Thoraxtheassasin 11 months ago
@Thoraxtheassasin
Yo u have great taste in guns, how do u disable the blowback on this gun?
FreakGta4 8 months ago
cool loking gun do you have a link
appd10 1 year ago
U need to charge the battery. I also prefer the dboi m4
hockeykid30b 1 year ago
Can the "area's lsw" be split in 2?And can u send it to England?
MrSJBlock 1 year ago
When you say "by ARMY" do you mean by classic army?
ColinSWiseman 1 year ago
@ColinSWiseman No... "ARMY" and "Classic Army" are two different manufacturers.
KrazyWWeFan247 1 year ago
@KrazyWWeFan247 ive never herd of "ARMY" ive herd of Classic army and army armament.
ColinSWiseman 1 year ago
@ColinSWiseman I didn't mean to confuse you...Army IS Army Armament. lol
KrazyWWeFan247 1 year ago
@KrazyWWeFan247 oh lol. no worries
ColinSWiseman 1 year ago
L2speek
RaZorPwn 1 year ago
Is this a G&G clone? If so, how does it compare?
csmybuttt 1 year ago
@csmybuttt This is a clone yes...you can't compare the quality of this gun to the G&G version..that's like comparing a Toyota to a Corvette. lol
KrazyWWeFan247 1 year ago
@KrazyWWeFan247 Well, I would've liked a more specific answer instead of simply dismissing the clone as inferior. By the way, you can't compare a Toyota to a Corvette because one is a car manufacturer and the other is a model of car. Besides, Toyota Supras of the '90s kick ass. Your analogy does not make sense.
csmybuttt 1 year ago
@csmybuttt Ok...i'll try to be more specific...I cant tell you if this is a G&G clone, as i'm not 100% sure. I would ASSUME so though, as this gun has the blowback feature like the G&G. This gun has an electric blowback which will damage your piston over time, while the G&G has a pneumatic blowback system, which WONT damage your gearbox. As far as externals go, you know the G&G wins there. But it costs almost $400. So not an option if your on a budget. Was I specific enough this time? lol
KrazyWWeFan247 1 year ago
@KrazyWWeFan247 How can you tell what kind of blowback it has? Also, I don't see anything funny in this situation, or has the meaning of 'lol' changed?
csmybuttt 1 year ago
@csmybuttt Because I have seen several other reviews on this gun and they stated that it has an electric blowback system. The blowback mechanism is connected to the piston so every time the piston moves the bolt moves. This puts alot of stress on the piston and it will destroy your piston over time. But you can disable this feature if you know how. Like I said the G&G has a pnuematic blowback which uses the air inside the cylinder to move the bolt. This puts NO stress on you internals...
KrazyWWeFan247 1 year ago
@KrazyWWeFan247 Oh ok. TY for the information.
csmybuttt 1 year ago
@csmybuttt No problem. One more thing...I just learned from a thread on airsoft retreat that this IS a full G&G clone with a STAMPED STEEL reciever. :)
KrazyWWeFan247 1 year ago
Just one thing, on the real rifle, you wouldn't hit the bottom of the mag, it could dislodge the top round (in this case, the top BB) amd it could actually damage the magazine.
Sorry, just had to point that out =D
sniperking23435 1 year ago
just worked out, its 133 quid for the AA R85 and a replica full metal susat from the CRW website... thats such a good deal
rob1nd2 2 years ago
Comment removed
Hazzaboipx4 1 year ago
How Long Would This Gun Take To Deliver If I Ordered It Today.
RockOnShitAndBollock 2 years ago
this is like my friends one....the mag is a bitch to get in and out
WaSSupYo8o8 2 years ago 7
@WaSSupYo8o8
Hey, how did you find the delivers process? and is the rifle worth what you payed? as in have you had any faults with it?
Cheers
UKRspartan 1 week ago
@UKRspartan it's a good gun. just you have to get used to it. only faults is, bb's get into the frame through the holes and its a bitch to take them out. along with the sticky mag problem, but other than that its a good gun.
WaSSupYo8o8 4 days ago