I have a FA-91, and it eats every round that chambers just installed a new recoil buffer and look forward to seeing what she can do with the new AIM scope. I think his problem lies with any rebuild shes tight as hell till parts ware in.
Heath, Not familar with the platform but I doubt the mag is the cause. The round is chambering, mag did it's job. It may be a hammer reset issue. Meaning the hammer is following the bolt closed and not striking hard enough. Or maybe a headspace issue. Meaning you might have a very small gap between the fully seated chambered round and the bolt. Making the firing pin hit weakly or miss altogether. If ur trigger pulls and you hear the hammer strike it will likely be headspace because it reset.
Actually in this or the second vid, I figured out it was just bad ammo. It was TZ 80 headstamped Israeli surplus, and was ok plinking, but horrible. 1in10 had bad primers.
I jumped to the weapon because it was a new build.
Bad sync with video and voice dude. And those damn cheap alluminum mags suck sooooooooo bad, get the steel ones dude way more reliable. And post a good bump fire man those 308s burp soooo well!
Hmmm.. you sound dumb enough to be a cop. Shake anyone down for a day old doughnut lately? Help yourself to something in the evidence room? Or are you just satisfied talking out of your ass? You might want to show something of yourself if you feel so bold as to judge others. You are a tool, and insulting strangers on the net won't change that any more than that badge made a man.
I apologize if you are the person speaking on the video....which isn't always the case....no personal attack meant. Comment was removed and the main thing I was protesting was the FA-91.
Hey victor I am not sure if you know about the FA-91 cause Springfield used the same receiver and I have had mine glowing hot after 400 rounds without any jams. I am a 1/4 Lithaunian, 3/4 Asshole! You don't no shit. Because of his $1.98 cheap ass surplus fucking garbage magazines he is having misfeeds just like your diarrhea of the mouth. His FA-91 is a fine weapon!!!!!
Very interesting. I am part of the original team of Lawyers who filed the class action lawsuit against Federal Arms. Our original dossier has the testimony of three eyewitness
former owners of FA-91 who testified that the receivers did become loose and caused misfeeds,FTE's FTF's and one excessive headspace discharge explosion. The judge ruled in favor of the defendants after examination of the evidence. According to our ATF expert testimonial,trunion was for
LMAO internet lawyers..... always telling someone something they should or shouldnt do. Those mags are garbage, Ive tried em in g3s and cetmes. Im not sure if its just a spring issue but the followers like to tilt alot in them. And just about all cetme and 91s will eventually get headspace issues as this was a flawed design with the carrier. Its up to you to check your headspace, as a firearms owner you should atleast know how your gun works not to mention preventive maintenace.
Hey victor I am not sure if you know about the FA-91 cause Springfield used the same receiver and I have had mine glowing hot after 400 rounds without any jams. I am a 1/4 Lithaunian, 3/4 Asshole! You don't no shit. Because of his $1.98 cheap ass surplus fucking garbage magazines he is having misfeeds just like your diarrhea of the mouth. His FA-91 is a fine weapon!!!!!
I think it may be better to wait or count to 20 when you have a mis-fire, I've NEVER had any problems with my 91, everytime you pull the trigger, it goes BANG!!!
Compared to US production "Lake City"...yeah...it blows ass. But when you have so few choices in ammunition, you shoot what you can find in quantities capable of keeping proficient.
Tell me about it, the ammo is more expensive than the magazines! But the US Military is switching back to 7.62 NATO for squad automatic weapons and for thewave of M14s that we are sending to the sandbox.
I use about 600 rnds per month...more in the summer.
I'm sorry I didn't respond to you guys, until I opened the vid the comments never showed up.
I used plain old cold blueing on the steel, and the same type cold aluminum blacking on the reciever. Birchwood Casey is the brand, good stuff, good price.
I have a FA91 it has Century arms stamps on the bottom (by the barrel) so yes i'll support your statement towards Asshat. anyways the barrel on mine physically ends at 14" but there is a muzzle brake welded on the end making it the legal length of 16.5". with such a short barrel plus the muzzle brake you have to be a good 35 feet behind the person shooting or your ears will ring! (no kiddding)
I love my CETME and use it in tactical competition, the G3 is my newest build, this was its test...the old Israeli ammo was junk, but the weapon performed well. Best regards from the USA to you in sunny Spain!
I know. I own one of those as well. The one in this video is actually a H&K G3, quite similar, but of a slightly newer design. The CETME vids are all labeled and on my youtube page as well.
Actually Asshat, Century arms built those rifles from decommissioned G3 full-auto, surplus rifles. The reciever was made by Federal Arms, which was purchased by Century. You again, have no idea what you are talking about...yet you continue to speak. Thanks for making an "asshat" statement for all my buddies to laugh at.
The next thing you write should be a suicide note.
I have a FA-91, and it eats every round that chambers just installed a new recoil buffer and look forward to seeing what she can do with the new AIM scope. I think his problem lies with any rebuild shes tight as hell till parts ware in.
MarbleDemo 1 month ago
man that leg holster strap must be maxed out
JSS011 9 months ago
Magazine*
phantom1045 1 year ago
fa91 don't like brown bear ammo
nikered123 1 year ago
Heath, Not familar with the platform but I doubt the mag is the cause. The round is chambering, mag did it's job. It may be a hammer reset issue. Meaning the hammer is following the bolt closed and not striking hard enough. Or maybe a headspace issue. Meaning you might have a very small gap between the fully seated chambered round and the bolt. Making the firing pin hit weakly or miss altogether. If ur trigger pulls and you hear the hammer strike it will likely be headspace because it reset.
hellyeahdrum 2 years ago
Actually in this or the second vid, I figured out it was just bad ammo. It was TZ 80 headstamped Israeli surplus, and was ok plinking, but horrible. 1in10 had bad primers.
I jumped to the weapon because it was a new build.
Heathh49008 2 years ago
Good rifle for the Zimbabwe Army....
thezeb2 2 years ago
Good rifle for any fighter really.
molanlabexm15 2 years ago
Bad sync with video and voice dude. And those damn cheap alluminum mags suck sooooooooo bad, get the steel ones dude way more reliable. And post a good bump fire man those 308s burp soooo well!
chevydude97 3 years ago
Comment removed
kncook50 3 years ago
Hmmm.. you sound dumb enough to be a cop. Shake anyone down for a day old doughnut lately? Help yourself to something in the evidence room? Or are you just satisfied talking out of your ass? You might want to show something of yourself if you feel so bold as to judge others. You are a tool, and insulting strangers on the net won't change that any more than that badge made a man.
Have a nice day.
Heathh49008 3 years ago
I apologize if you are the person speaking on the video....which isn't always the case....no personal attack meant. Comment was removed and the main thing I was protesting was the FA-91.
kncook50 3 years ago
another dumbass tryin to sound smart
coltcomphbar 3 years ago 2
N.W.A. in the back ground?
Five stars for that.
finch8423 4 years ago
hahaha i noticed that too good song by a good artist
luke0593 3 years ago
Hey victor I am not sure if you know about the FA-91 cause Springfield used the same receiver and I have had mine glowing hot after 400 rounds without any jams. I am a 1/4 Lithaunian, 3/4 Asshole! You don't no shit. Because of his $1.98 cheap ass surplus fucking garbage magazines he is having misfeeds just like your diarrhea of the mouth. His FA-91 is a fine weapon!!!!!
HOSSOMHOLEHOUND 4 years ago
Very interesting. I am part of the original team of Lawyers who filed the class action lawsuit against Federal Arms. Our original dossier has the testimony of three eyewitness
former owners of FA-91 who testified that the receivers did become loose and caused misfeeds,FTE's FTF's and one excessive headspace discharge explosion. The judge ruled in favor of the defendants after examination of the evidence. According to our ATF expert testimonial,trunion was for
steel not aluminum expansion.
victor1566 4 years ago
Also you need to tone down your rhetoric. You have been officially notified as a matter of record.
victor1566 4 years ago
LMAO internet lawyers..... always telling someone something they should or shouldnt do. Those mags are garbage, Ive tried em in g3s and cetmes. Im not sure if its just a spring issue but the followers like to tilt alot in them. And just about all cetme and 91s will eventually get headspace issues as this was a flawed design with the carrier. Its up to you to check your headspace, as a firearms owner you should atleast know how your gun works not to mention preventive maintenace.
chevydude97 3 years ago
Hey victor I am not sure if you know about the FA-91 cause Springfield used the same receiver and I have had mine glowing hot after 400 rounds without any jams. I am a 1/4 Lithaunian, 3/4 Asshole! You don't no shit. Because of his $1.98 cheap ass surplus fucking garbage magazines he is having misfeeds just like your diarrhea of the mouth. His FA-91 is a fine weapon!!!!!
HOSSOMHOLEHOUND 4 years ago
FA-91 is junk. Used barrel fitted onto a receiver that moves. Barrel moves in trunnion when rifle gets warm. Maybe you can
try Lithuanian .308. Federal Arms was sued over FA-91 and went out of business.
victor1566 4 years ago
Barrel may be worn too. If this is a kit, then it was a used up barrel fitted on a alum receiver.
victor1566 4 years ago
Please make this video again with the following;get absolutely new ammo;have your
distance recorded: it is hard to see, but it
looks like you have those pumpkins at about 25 to 30 yards. You should be nailing them
every round since this is point blank range.
I saw only 50% of rounds hit target.
victor1566 4 years ago
FA-91 is unreliable and inaccurate. Aluminum
receiver is junk. That's why Federal Arms went out of business. Sued too many times.
victor1566 4 years ago
I think it may be better to wait or count to 20 when you have a mis-fire, I've NEVER had any problems with my 91, everytime you pull the trigger, it goes BANG!!!
24t68Jm1 4 years ago
Compared to US production "Lake City"...yeah...it blows ass. But when you have so few choices in ammunition, you shoot what you can find in quantities capable of keeping proficient.
Heathh49008 4 years ago
lol that looks almost more like a FN FAL
reaperflynn3 4 years ago
Tell me about it, the ammo is more expensive than the magazines! But the US Military is switching back to 7.62 NATO for squad automatic weapons and for thewave of M14s that we are sending to the sandbox.
I use about 600 rnds per month...more in the summer.
Heathh49008 5 years ago
I love how Google just spent a Gazillion Trillion Billion dollars to buy Youtube and the damn audio is still out of sync with most videos.
That rifle looks damn good. What kind of finish did you use on the metal parts?
ImBlackDontHate 5 years ago
I'm sorry I didn't respond to you guys, until I opened the vid the comments never showed up.
I used plain old cold blueing on the steel, and the same type cold aluminum blacking on the reciever. Birchwood Casey is the brand, good stuff, good price.
Heathh49008 5 years ago
I have a FA91 it has Century arms stamps on the bottom (by the barrel) so yes i'll support your statement towards Asshat. anyways the barrel on mine physically ends at 14" but there is a muzzle brake welded on the end making it the legal length of 16.5". with such a short barrel plus the muzzle brake you have to be a good 35 feet behind the person shooting or your ears will ring! (no kiddding)
how loud is yours?
Juicetech 5 years ago
Loud as hell...I love it! The guys at the range stop and stare every time I open up...the pressure wave is felt even with good hearing protection.
Heathh49008 5 years ago
ohh: thw new FUSA CETME using spanish military is CETME MODEL "L" 5.56 nato mm
less weight but ugly jeje
regards!
z32madrid 5 years ago
jeje thanks and enjoy your FUSA CETME
regards from spain too
z32madrid 5 years ago
i using one cetme 7.62 in my militar instruction
CETME in spain also call "CHOPO"
regards
z32madrid 5 years ago
I love my CETME and use it in tactical competition, the G3 is my newest build, this was its test...the old Israeli ammo was junk, but the weapon performed well. Best regards from the USA to you in sunny Spain!
Heathh49008 5 years ago
I know. I own one of those as well. The one in this video is actually a H&K G3, quite similar, but of a slightly newer design. The CETME vids are all labeled and on my youtube page as well.
Heathh49008 5 years ago
cetme 7.62 is a spanish fusil
Centro_Estudios_Tecnicos_Materiales_Especiales
z32madrid 5 years ago
Actually Asshat, Century arms built those rifles from decommissioned G3 full-auto, surplus rifles. The reciever was made by Federal Arms, which was purchased by Century. You again, have no idea what you are talking about...yet you continue to speak. Thanks for making an "asshat" statement for all my buddies to laugh at.
The next thing you write should be a suicide note.
Heathh49008 5 years ago
You are such a fucking joke. Also Century Arms is an Importer not a manufacturer.. And once again it is not a "clip" just kill yourself please.
AgentAsshat 5 years ago