How to Airsoft: Installing an AB MOSFET

[GravitysGame]

Why use a motorkiller mosfet? only difference is less noise.

[Mountain117]

try bending the 33k resistor so it overlaps the mosfet, and bend the 100ohm resistor so it goes from the back of the mosfet (so that the gate wire comes up from the metal square) 30dollars for poor built mosfet is quite lot of money, not hating, just trying to give u some advice for the built quality, less wobbling parts in it u know :) ps sorry for bad english

[ovandolah14]

Hey i know pretty much everything about a gearbox except for the wiring stuff which i didn't really want to learn. However im kinda sick of paying labor to have someone else do it i want to do it myself but im not sure what to use for the sawdering part.

[JahDropper]

Could you show a video on how to do this with a gun that uses a Micro switch?

[AznXmodder]

If I buy one could you connect a tamiya connector for me? And do you include heat shrink?

[Lihaschu]

what's that m14 you were using?

[1337xmod]

hey hey hey how about a shooting video? or maybe like a comparison with and without. my local store charges $100 for the mosfet and labor but it would be cheaper if I can get the parts for cheaper. if you know what i mean

[Nelsonh396]

Omg i want to buy it But i dont have the money. Ill buy it once I get my barrett Guarenteened expect me near christmas or black friday

[AirsoftDomonation]

haw can you tell there active braking?

[0611930024838]

LOL I HAVE MOSFED FOR SALE!

[MoneyManHolla]

hi, i have a vfc mr e series and im not sure if i should run a 11.1v li-po so what should i do.

[FFIAirsoft]

you really sell these things? im interested man..

[dsdehan44]

will they fit in a p90?

[pontus515]

@dsdehan44 You can fit a cheezeburger in a P90.

[cccplt]

great vid, this helped me alot

[andromedarr]

Can you use a wet piece of cloth for cooling the Wires? That would be more effective i think

[HGClark]

will someone please answer me! do some mosfets have built in fuses? because i want to install one in my echo 1 vector arms ak. and i was wondering about removing the fuse

[M05F3T]

@HGClark lol i didnt run a fuse using high speed setup gearbox

v2 gb

stock g&g gears

g&p m120 highspeed motor

12v 4200 Mah nimh battery (HUGE)

guarder piston (shortstroked gears n piston)

TM piston head (aluminum)

and i was running about 33 rps no FET!

It was crazy and to this day i dont understand how i got it that hot with such little work :o

[ryukensfj]

Are you still selling this?

[animator995]

can u use a mosfet without a lipo battery? :P dumb question

[AlphaWolf4672]

@animator995 yeah... :P

[nonamre]

Would a cup of ice water do the same thing as saliva since the point is to keep the wires cool?

[AlphaWolf4672]

@nonamre Umm, yeah but I would not suggest soaking your gun in ice water... lol

[bloodfartification]

im a little worried about installing this in my g&g w/ a crane stock... it doesnt look like ill be able to fit the mosfet through the stock buffer tube.... so would buying a new buffer tube fix it?

[SHWELL11]

Have you looked into the 2 gate wire setups yet. I find them much easier to install. But, you are doing a great job. Keep up the progression man.

[TheAirsoftReviewer1]

@SHWELL11 I have but those get a little too complicated for me and I like just using the three wires so it doesn't take up that much more room.

[andromedarr]

@SHWELL11 I have a 1 gate MOSFET, and it is very easy to turn it into something like a 2 gate MOSFET:

Just solder a small gate wire to the motor tab of the red wire, and then connect that to the switch. It has all the advantages of real 2 gate mosfets.

[halofreak12301]

ummmm what do they do!??!? please respawn

[venom0013]

@halofreak12301

Oh god, at least make an effort to look for it yourself.

(Video description, k?)

[AirsoftPlayer10]

@halofreak12301 1. Increased Rate of Fire (1-4 rps)

2. Better trigger response

3. Saves trigger contacts when using Lipos

4. Stops the motor the split second you let go of the trigger

[airsoftmasters]

@AirsoftPlayer10 5. Increase wear on your motor.

[AirsoftPlayer10]

@airsoftmasters get a Matrix High Performance Magnum Airsoft AEG Motor - Long Type.

or a

Matrix High Performance Airsoft AEG Turbo Motor - Long Type.

both are 45USD and they last a LONG time as i have used a FET and deans plugs along with a lipoly battery and have not had a problem

[M05F3T]

@AirsoftPlayer10 NO DONT.

GET g&p m120 highspeed motor for the best ROF. Better than systema motors.

[TheAlexBradley]

holy balls i thought that towel was your carpet, i was like DAMN thats a dirty ass carpet

[whyusucksobad]

That would scare the poop out of me. installing myself i mean.

[xxthehuskycaboosexx]

dang these look good, but sadely im a newb at my gear box, and dont know how to open it, and the nearest airsoft store from me, is 100 miles away. FML

[infamousj15]

i may sound pretty stupid bt wats a mosfet n wats the purpose of it on an airsoft gun,so basically im just asking wat does it do,can someone explain pls thx

[sir8aeriosthethird]

hey, nice review, but what is the name of the song at the end?

[PAairsofter]

Was that the G&G M14? If so, good purchase :) lol, I'm getting mine soon for an early birthday present.

[AsianAvenueM]

so we have to use a dean plug battery?

[brettfavre727]

@AsianAvenueM

you dont have to, but its recommended, deans are better than china connectors

:D

Upgrade todaaaayyy

[airsoftmasters]

@theairsoftreviewer1 you forgot to mention that the active breaking increases wear on your motor.

[saggeorge100]

Great video as always!

[Raneuvfire]

did u make ur own mosfets? if so, could u tell me what u used to make em?

[TheAirsoftReviewer1]

@Raneuvfire I do but why would I give away my secrets ;)

[airsoftmasters]

@Raneuvfire here you go airsoftforum (dot) com/board/Aeg-Electrical-Guide­-t104376.html

[Raneuvfire]

@airsoftmasters wow thanks!

[thedrummiester]

hey i have an echo 1 m4 that i got cause all my guns were borken. i want to make it lipo ready. what would you recomend doing

[TheAirsoftReviewer1]

@thedrummiester Get a mosfet, re-shim, new piston.

[thedrummiester]

@TheAirsoftReviewer1 thats it? i mean ive asked other people and they've all said just get a new mechbox from systema and a new motor. thanks for the help though

[AirsoftPlayer10]

@thedrummiester as TheAirsoftReviewer1 said you might also want to get a lipoly ready gearbox for $110 USD off of evike.com

[Darkspartan089]

@thedrummiester technically all guns are LiPo ready until they brake lol

[OceanAirsoft]

Will this work on a JG G36c

[airsoftgunner47]

@OceanAirsoft yes they will.

[TheAirsoftReviewer1]

@OceanAirsoft If it has a batter an motor it will work.

[chaoz1680]

FINALLY! a good mosfet installation video, good job =D

[Spetsnaz1220]

i was considering getting a mosfet but i dont wanna risk breaking my gun. plus ak47's are annoying to get down to the gearbox. cool vid tho. if i did get a mosfet i would definetly buy it from you.

me and my friends started making airsoft videos and it would be cool if you check out my channel. were going to give away a 3 pt sling as soon as we hit 125 subs so the more people who subscribe, the faster we give it away.

i hope you dont mind me advertising a little, Reed.

[Metafan101]

What does a AB MOSFET Do?

[TheAirsoftReviewer1]

@Metafan101 Updated description.

[RainbowsHaveEyes]

whats a mosefet?

[TheAirsoftReviewer1]

@RainbowsHaveEyes Updated description.

[AirsoftM4KWA]

Could you do my m4?

[TheAirsoftReviewer1]

@AirsoftM4KWA Sure.

[AirsoftM4KWA]

@TheAirsoftReviewer1 Thnx. I still have to get deans and rewired to front done but ill see what i can do.

[nmairsoft21]

"so thats how you do it... BTW did i mention i have AB MOSEFETS FOR SALE?!?!" lol

[oppisiteofafredfan]

what do they do?

and nice soldering

[TheAirsoftReviewer1]

@oppisiteofafredfan Updated description.

[oppisiteofafredfan]

@TheAirsoftReviewer1 thx

[fo0g]

Nice soldering... :D

[Incuby]

@1:10 I see only one wire that goes to the motor o.0

[TheAirsoftReviewer1]

@Incuby Including the ground wire there are two.

[petsoukos]

What do you gain with that ?

[TheAirsoftReviewer1]

@petsoukos Description updated.

[Shinobi027]

how would you install one of your mosfets in the rear of the replica instead of the front of the replica?

[TheAirsoftReviewer1]

@Shinobi027 Same way, just run the gate wire (20 AWG green) to the back with the other wires.

[coolbreez78]

kinda a airsoft noob but what is that plz tell me

[TheAirsoftReviewer1]

@coolbreez78 Updated description.

[HiroMingDynasty]

I see Live type

[ty2160]

how long would it take for the mosfet to get to me? I got OP vigilance coming up.

[TheAirsoftReviewer1]

@ty2160 I ship within 24 hours via usps express.

[SavageSnipes]

So what are all the things you need to install a mosfet. A mosfet of course, a wire stripper, heat shrink, soldering iron and solder, and your own spit. Anything I'm leaving out?

[TheAirsoftReviewer1]

@SavageSnipes Thats about it, just a gun.

[slipknotfreek2006]

HAHA "...so your good to go, oh by the way, did i mention i have AB MOSFET FOR SALE!!"

[14873]

lol Thanks for the guide and nice ending ; )