revving my rc car with no clutch bell or clutch

[TheMikeGerm]

my car does this right now how do i fix it :(

[MrBjoern3]

You Must have a fail Save Thais the Problem i think

[MrHyper728]

silly :D

[demonsparkx]

Horray! Blown top end

[1999151]

how much do you want for it

[CrAzyAirsoft21]

nice way to ruin ur rc car u probably got it from ur mom

[phattacorider]

@CrAzyAirsoft21

That's a shit brand RC car, very inexpensive, can be bought on ebay brand new for about $130. I know cuz my first nitro car is like this one except it's a street car and it sucks balls. Turned into a great brushless conversion project though.

[OFFICIALNENTENDO64]

are you gonna get a clutch

[crazyjack41]

Ok, that engine doesnt sound healthy. And as for the rest of the car...

[crazyjack41]

That engine sort of doesnt sound healthy.

[FUdirtbag]

what the fuck is up with your front camber? jesus christ, that's gotta be like +10 degrees!

[1999151]

how much do u want for it

[razvanopran14]

dont stop the car like that i will get dirt in fuel tank

[442paul]

ur running it way lean,

notice it holds the revs after letting of the throttle

[30GB]

omg dumb ass you dont deserve to own a rc if you rev like that with no load it can give lots of ware on the con rod and piston

[ENTRIS1]

@30GB u know what u are a dumb fuck

[30GB]

@ENTRIS1 huh? your a dumb fuck ahahaha

[ENTRIS1]

@30GB did u even watch god your stupid

[realfastRC]

do you still own this rc??

[F4k3rg0pr0]

if shipping is more than 20-30dollars i wont buy it! but im verry intrested so im buying it for 70-80dollars right to my house deal?or no deal?

[F4k3rg0pr0]

o and culd you please tell me whats broken on it likeis the engine in good shape on the car

[442paul]

Mega lean

[1999151]

how much you want for it

[Coryf1989]

for this buggy?

ill give you the roller and mostly everything I have (rc related) for 50$ + actual shipping.

[F4k3rg0pr0]

ill buy

it

[Coryf1989]

seriously?

[F4k3rg0pr0]

jah um how much do you want for it ?

(im not gonna pay more than (100)dollars

[F4k3rg0pr0]

o you want 50 dollars for it?

[Coryf1989]

yes its not very good condition but im more tha happy to sell it to you for 50$ + shipping. it needs an engine and electronics, maybe suspension too. but 50$ aint bad for a roller thats 75% fnished...

[F4k3rg0pr0]

how much wuld you like for shipping to canada wersbank? im pritty shure im going to buy it if shipping is about 10-15 dollars please repy

[Coryf1989]

ps: message me, not holyfxxxiplayhalo2. i dont check that account anymore.

[joey0o7]

this is stupid because a engine needs to move and catch the air so it dont become hot plus you cant control the revs from going over the restricted revs which is normally around about 35 000 revs per minute

[helloimdodged]

I missed the part where you should have said "Thanks for watching my tutorial on how to break a engine a.s.a.p."

[lambofgod1371]

reving up any motor without any drag on it is very stupid

[snickerbar12]

dude i cant beleive the engine isnt broken lol

[Louisianacajunkid]

hwo much can i get them for i heard there crudy could u put another thing on em like an rc airsoft gun msg back how much can i buy em

[Coryf1989]

the himoto RTR package is 600$, my mugen setup cost me well over 1200$.

I only have the rollers left, the himoto is complete trash, needs an engine, electronics, and suspension. I would sell it for 25$ + shipping, im ready to throw it out.

the mugen roller has upgraded suspension, barely even used, never raced or jumped, I would sell it for 150$ + shipping. needs engine and elctronics.

if you wanna see a vid of the mugen in action, check holyfxxxiplayhalo2 videos, im sure theres one in there.

[Coryf1989]

ok, maybe the video isint in the holyfxxx profile... I will ask my brother when he gets home, I think its on his youtube account.

[HolyFxxxIplayHalo2]

yes it is. bluessummer is the youtube account, check it out.

[ballsniff13]

here how it keeps reving after you let off the throttle thats not good thats how i you can break connecting rod

[Louisianacajunkid]

were do u buy those

[Coryf1989]

hey, this is HolyFxxxIplayhalo2.

I assume you were talking about the car, I got it off ebay RTR for 600$. biggest waste or money ever, its a complete piece of shit.

if youre interested, I will sell you all my rc stuff, send me a PM. I have this himoto roller which im about to throw in the garbage, and I have a nice mugen mbx5 roller that I dont use enough to keep it around.

[ejgieseler]

LOL

HOLY FUCK

[timmytime1793]

BOOM!!!!!!!!!!!!!!!!!!!!!!!!

[Coryf1989]

lol, nah, it never did blow up. the engine still runs, lots lots of pinch though. it took a lit of abuse for a 80$ japanese engine.

[digerfilms]

Man that things gona blow!

[HolyFxxxIplayHalo2]

didnt blow, still runs, not the greatest, its lost a lot of pinch, was really abused, and junk to begin with.

I am now selling my main buggy and this himoto is pretty beat up... dont know what im gonna do with it.

[NickRcRacer]

is that engine a o.s

[HolyFxxxIplayHalo2]

SH .28

[georgebest7968]

man you thrrotle linkage did youhad to replace anothe r one i had to and i had to buy a new sevro need help its just the same like in his video my sevro like age is not pulling the thrrotle baclk to normal postions need help i tryed a to fit in a new sevro and new thrrotle linkage set full and a nrew aluminu pipe

[HolyFxxxIplayHalo2]

georgebest, you need to learn to spell, and use grammar dude. I would help IF I understood your question/post.

[AK4633]

i have a atomic warhead it does the same thing but havnt done anything to it only 2 days old. please reply???????

[HolyFxxxIplayHalo2]

check your cluth, it could be the clutch bell or the collet. DO NOT run your engine like his, it will wear out your piston/cylinder 10 times faster.

[paintballfuz]

u know if u hold the gas long enght the motor will got the the highes RMP that it might blow up or destory it!!

[HolyFxxxIplayHalo2]

I know, Ive been told that literally about 10 times now. That was he first and last time I started my engine without a clutch on it.

[mattsax1995]

were did u get it

[HolyFxxxIplayHalo2]

ebay. dont get a himoto, they are trash. you think youre doing a good thing by buying a "cheap" 500$ RTR car.. well this car has end up costing me near 1000$... should have got a good one right off the bat :S

I have mugen mbx5 now, cost me about 1000$ and its fuckin awesome.

[mattsax1995]

make a vid of your new one.

[HolyFxxxIplayHalo2]

watch?v=Am4GhhgSezM

its on my brothers profile. but its my car.

[mattsax1995]

wats your brothers profile name

[HolyFxxxIplayHalo2]

bluesummer i think... just copy the watch?v=Am4GhhgSezM into the search bar.

[HolyFxxxIplayHalo2]

it is bluessummer

[HolyFxxxIplayHalo2]

for anyone who is curious as to how the engine is.

its a junk 100$ SH engine, I didnt break it in, I really abused it, WOT down the street the first night I got it at like 10 at night. I made this video with it, it took a good beating and it still runs pretty good. It was never a great engine to begin with, but all the abuse I put it through didnt hurt it at all, its had about 2 gallons through it now.

[adb140275]

whats SH mean?

[HolyFxxxIplayHalo2]

not sure what it stands for, its the brand of my engine though, made by himoto.

[IonicBullet]

What a shitty engine.

[HolyFxxxIplayHalo2]

no, its actually not too bad for like a 89$ engine, shitty, but totally worth what you pay for it, it doesnt sound very good either, but puts out decent power.

[xburningmindx]

man we have the same problem too.. but how did you get running on your second video?

[HolyFxxxIplayHalo2]

dont run your engine if its doing this. it will keep over revving until it explodes, then you need a complete new engine. its something wrong with my/your flywheel setup, it needs resistance or the engine will over

I started it with a pullstart, I think they are better than starter boxes. if my car is like a half mile from me and it dies, i can walk to it and start it in 1 or 2 pulls on the pullstart, or walk out there with a 50lb starter box that costs like 200$. pullstarts are my favorite.

[jimgotnitro]

i've never heard a nitro engine rev that high!! thats like 55,000rpm

[HolyFxxxIplayHalo2]

thank you :D

[Corey21034]

your gonna run it too high and seize the engine

[HolyFxxxIplayHalo2]

yeah i know, i was told theres no "rev stopper" so itll keep over revving till something breaks. almost had to learn the hardway, last time ill do that. thanks for the advice anyways.

[nitroburner666]

why? it's a waste of an engine!

[HolyFxxxIplayHalo2]

whats a waste? i said i WONT do that again.

ps: this engine still starts and seems to run fine, well see how much power it has left when i get new electronics for it :(

[nitroburner666]

no i meant the guy in the vid! he's gonna seize the engine up coz it's running too high!

[HolyFxxxIplayHalo2]

I am the guy in the vid you idiot.

[ohmygahitscoby]

Why'd you say, "Oh fuck!" at the end?

[HolyFxxxIplayHalo2]

for some reason the muffler was hot and it burnt a part of my skin that already had a burn and it hurt.

[nitrozach54]

is that a red cat?

[HolyFxxxIplayHalo2]

yes it is, complete garbage.

and saebbi, i wish people woulda explained it like you did on the site.. now i understand perfecfly why it was doing that.. no resistance causing it to over rev. thanks for the info.

[saebbi]

Maaan You crazy man!!?

haha where you get that idea :)

The motor has to have resistance, or it will over rev. It doesnt have a rev-o-limiter like your every day car.

[ofnaman]

lol dude your gonna break a con rod and eat the sleeve alive doing that

[HolyFxxxIplayHalo2]

lol, well now i know.. ill never do that again.