That's on game camera operator, what if that engine slipped out of his hand? We have a rule at our club, don't stand in front of a prop at WOT or directly to the side, always position yourself behind it... FWIW.
Just set the engine at idle and pinch the fuel tubing and it will shut off. I've had air leaks in magnum 2-stroke carbs due to bad orings so try replacing that and make sure your idle speed screw (usually on top of the carb) is backed out far enough to let the carb fully close. I've had great sucess with magnums after a little tweaking. They do take much longer to break in than most engines.
Sometimes it takes a couple of gallons of fuel before they start idling well. I've had many friends rush the break in on these and lean them out to stay running and they burn them up quick. Put a good O.S. #8 plug in them and run them on 15% with the high speed needle set rich with a 500 rpm drop at WOT and you'll be golden.
can you sell this engine to me. if you sell contact me melvinantothomas@gmail.com
nitromelvinz80 1 month ago
That's bitch! I've built mini model steam engines, I'm thinking of doing my first gas model. How much did that little set up go for?
Bgee134 2 months ago in playlist Magnum
nice video
sezginatik 6 months ago
Dangereux ! à ne pas faire !!! je ne vois pas l'intérêt...mais sinon il tourne pas mal.
aeromodelisme45 6 months ago
thats one hell of a pocket fan
fairyheli2 9 months ago
That's on game camera operator, what if that engine slipped out of his hand? We have a rule at our club, don't stand in front of a prop at WOT or directly to the side, always position yourself behind it... FWIW.
michnet76 1 year ago
Just set the engine at idle and pinch the fuel tubing and it will shut off. I've had air leaks in magnum 2-stroke carbs due to bad orings so try replacing that and make sure your idle speed screw (usually on top of the carb) is backed out far enough to let the carb fully close. I've had great sucess with magnums after a little tweaking. They do take much longer to break in than most engines.
spyder000069 1 year ago
Sometimes it takes a couple of gallons of fuel before they start idling well. I've had many friends rush the break in on these and lean them out to stay running and they burn them up quick. Put a good O.S. #8 plug in them and run them on 15% with the high speed needle set rich with a 500 rpm drop at WOT and you'll be golden.
spyder000069 1 year ago
it's a 25. size = 4cc
9unuunu 1 year ago
4cc
9unuunu 2 years ago
@9unuunu looks more like a .40 size motor not 4cc
yittymitty11 1 year ago
no, not completely...
9unuunu 2 years ago
Did you put ur finger over the hole completely?? It should stop straight away!
KixmixaGTR 2 years ago
hmm....good luck with your stopping technique ;)
9unuunu 2 years ago
hey when it wont shut off just stick your finger's in the propeler
thenitro15 2 years ago 5
hahaha xD
Dannemxdriver 2 years ago
am incercat si asa..dar incepe sa friga dupa aprox 30 secunde de functionare;)
9unuunu 2 years ago
macar e bine ca l-ai tinut pe un suport :) l-am vazut pe unu pe youtube care tinea motoru direct in mana..
cosminx2003 2 years ago
=)) not really ,no
9unuunu 2 years ago
Damn thats just askin for it.
RCFLYER83 2 years ago
neee e chiar tare...incearca si tu :)
9unuunu 2 years ago
te cam risti sa il ti asa in mana:D:)))
alexbuneapetru 2 years ago
the RPM is from 1000 to 18.000 :)
9unuunu 2 years ago
Sounds Like about 15,000rpm, is it as loud as a 30cc for example
Judaspriest992 2 years ago
:))) or else you can chop you're fingers :))
9unuunu 2 years ago
famous five last words: DON'T TRY THIS AT HOME
jack9102 2 years ago
=)))
9unuunu 3 years ago
il tin si pe ala...numai dami-l =))
9unuunu 3 years ago
tine-l si pe al meu in mana 25 cc:))
costache01 3 years ago
yep :))
9unuunu 3 years ago
wow it dose sounds like a 4 stroke lol
30GB 3 years ago