I sing to mp3 back tracks and use a powered speaker a mixer with pre amps and phathom power and an EV767 mic. Does anyone of you guys know if I can use this Rode NT1A in a live situation with good results ?
Es un micro sobrevaluado... es muy usado en guitarras pero la verdad que deja mucho que desear, no lo recomiendo, por el mismo precio hay micros mucho más recomendables.
Is it possible for one to use a condensor mic and all the equipment and software used in a recording studio all hooked to some nice stage loudspeakers and have a perfect studio quality sound if one were to sing for a live audience???
The NT1-A is excellent if you're going directly into an audio interface without any analog EQ or compression. These microphones have very little electronics inside that produce noise which is perfect when you're doing all the effects in software.
Click on my name and listen to "The Sun" and "Stretch My Arms and Grab", both using an NT1A without EQ.
I like the NT1A ,OK so it not the best or most natural,but what do you expect for the money .
I have 2 mounted X/Y in my own zepp/wind sock made my own cables ( lo C ) each 20 mtrs with Gold XLRs alesis multimix 8 and Sony MZ-RH1 PCM MD recorder with its 8 hour power supply its great for good quality field use with the resolution of CD.
I have three and they're very hot signal wise.They sound best with a lower gain preamp like an art tube,no 20 db button necessary.I even switched out the original 12ax7 tube for a 5751 sovtek tube to reduce the gain.Otherwise,it's great.You could hear a pin drop with this thing. : D
This is an incredible mic but it will blow out very easily and you won't notice it at first because it still works but it will sound distorted when confronting mid high to moderate level sounds.
I have three of them all went bad when the headphones made a little feedback.
woah, this is worrying! Anyone else had this problem? Just "a little feedback" and they are blown! I googled and couldn't find anyone with the same experience. Did you buy all three at the same time? I would contact Rode - they have a long guarantee (10 years?)
i jus got this, works brill and most the self nois was coming from my mixer but sorted that out by running a cable from the stereo aux returns 1 (left) 2 my external soundcard out rear??? dont ask me y this works but NOT a sound now must of made a circuit!
Whoever clicked thumbs-down to the above comments, should actually make positive suggestions, rather than just bag other peoples. Thumbs down doesnt help any of us!
so you don't have that tape hiss shit in your recordings?-cuz i hate that shit,and since u said u bought it and from what i hear its tha shit-when i say tape hiss i mean like....when you play a cassette,and that noise comes in before tha song,thats what i keep gettin
No - you can not eliminate tape hiss - that's the problem you deal with when using tape. Best thing to do is go to digital. We're talking about self-noise and to be honest, even with cheap chinese condensors it's hard to hear the self noise.
Do yall think its better than the samson co1u. Iv'e had the samson for about a year or so and it sounds great I use Cool Edit. Which is really old. But I dont know It sounds good to me. goto Myspace,com/DieverseBkilla lemme know what you guys think.
I was lookin for you guys to visit the page, and check it out before you commented because A: people dont use it correctly. Listen to my music and tell me if the quality sucks. im not $12,000 professional but for 79 bucks it works. im trying to upgrade but dont know where to go. im sure this isnt the BEST MIC EVER either. thanks for the feeback thou
I listened to your tracks on your my space profile. I'm really feeling that "you can see me" track! Everything on it is great. The lyrics, the beat, the hook, everything except the most important thing! The delivery! There have been many over night sensations that have made on a mere single. "I KNOW" that if you would re-recored this track and really put some feeling into it the second time around, With proper promoting, It would definitely become an over night hit!
thanks man well it was for a person that I no longer hang with or do music with all of those trckas are .. i dunno a year or so old. But I wrote that in about..5 minutes.. LOL i was trying to sound sad, diffrent I dunno. That day an old neighborhood freind has gotten shot..So i was coming to term with that, and the guy on the chorus, sucks, he doesnt know the program like I do now, ive gotten way better but thanks alot man
@techn9nekaliko im not sure if you have purchased a mic yet, but.. for $30 you probably arent going to find anything. But as for cheap and decent you should try the AudioTechnica AT2020, and possibly the MXL v67.
Foley? That's lovely, I'm aiming to buy one for the same task. I was watching Howel's Moving Castle the other day and was amazed at the low self-noise their mics had for all the foley work - and these were tiny sounds, like skin chafing and fabric moving. Hopefully this mic will get me a similar quality. ^_^
Plug 2 of these mics into a Fostex FR2 ...NOT the "LE",with so good blimp & softy covers,and dont forget low Capacitance high quality cables and you got a winning combination,but try to stay out of the Rain.
I sing to mp3 back tracks and use a powered speaker a mixer with pre amps and phathom power and an EV767 mic. Does anyone of you guys know if I can use this Rode NT1A in a live situation with good results ?
alcatras4 5 months ago
Es un micro sobrevaluado... es muy usado en guitarras pero la verdad que deja mucho que desear, no lo recomiendo, por el mismo precio hay micros mucho más recomendables.
chitarradell800 10 months ago
This has been flagged as spam show
Most excellent Be Naughty lady benaughtyman.info
laksikakanchana 1 year ago
what would be a good mic pre for this mic
Poachy20 1 year ago
its possibl to conect whit computer this microfon?
MyHakob 1 year ago
@MyHakob Yes, using a Preamp, such as the m-audio mobilepre usb.
It can accept the XLR, 2 in fact.
RazsterTW 1 year ago
Is it possible for one to use a condensor mic and all the equipment and software used in a recording studio all hooked to some nice stage loudspeakers and have a perfect studio quality sound if one were to sing for a live audience???
Aldenif 1 year ago
i dont know what stand to buy for mine.
mista1kaos 1 year ago
Comment removed
azarragamichael 2 years ago
now you have to deal with your "suckiness"
bitcheznhos 1 year ago
The NT1-A is excellent if you're going directly into an audio interface without any analog EQ or compression. These microphones have very little electronics inside that produce noise which is perfect when you're doing all the effects in software.
Click on my name and listen to "The Sun" and "Stretch My Arms and Grab", both using an NT1A without EQ.
Hamachingo 2 years ago 5
hi i have a question! ...witch mic is better ? rode nt1 or rode nt1000 ?? pls tell me what do you think :)
dadydrop 2 years ago
nt1000 always just go to any music store to hear them both they are really different.
Nu9v9 2 years ago
tnx for the info !! :)
dadydrop 2 years ago
I like the NT1A ,OK so it not the best or most natural,but what do you expect for the money .
I have 2 mounted X/Y in my own zepp/wind sock made my own cables ( lo C ) each 20 mtrs with Gold XLRs alesis multimix 8 and Sony MZ-RH1 PCM MD recorder with its 8 hour power supply its great for good quality field use with the resolution of CD.
tsaudiovisual 2 years ago 8
@tsaudiovisual
compare this to a Neuman U87. Which one would you use with
a tube pre amp to record male vocals (George Michael/Donnie Osmond
type voice or Peter Cetera)? U87 or the NT1-A and why?
Breckmin 1 year ago
@Breckmin dude you cant compare this rode with a neuman u87, neuman is over a £1000 , 5 times more expensive than rode nt1
rollituplightitup85 1 year ago
i heve a question !! i heard that the NT1A with time sounds not so natural !! is this true??? pls if u have some experience with it lett me know
dadydrop 2 years ago 2
I have three and they're very hot signal wise.They sound best with a lower gain preamp like an art tube,no 20 db button necessary.I even switched out the original 12ax7 tube for a 5751 sovtek tube to reduce the gain.Otherwise,it's great.You could hear a pin drop with this thing. : D
namniekib 2 years ago
Comment removed
amor1967 2 years ago
This is an incredible mic but it will blow out very easily and you won't notice it at first because it still works but it will sound distorted when confronting mid high to moderate level sounds.
I have three of them all went bad when the headphones made a little feedback.
Can't even find a way to fix them...
amor1967 2 years ago 2
Comment removed
sharkster1969 2 years ago
This has been flagged as spam show
woah, this is worrying! Anyone else had this problem? Just "a little feedback" and they are blown! I googled and couldn't find anyone with the same experience. Did you buy all three at the same time? I would contact Rode - they have a long guarantee (10 years?)
sharkster1969 2 years ago
This has been flagged as spam show
OK... I contacted Rode and they fixed two of them for free. I feel better about them now.
The third one was OK " " I don't think so but oh well. They are great mics and having two is better than none.
amor1967 2 years ago
This Is A Good Mic Trus
RevolvaOfficialPage 3 years ago 2
i jus got this, works brill and most the self nois was coming from my mixer but sorted that out by running a cable from the stereo aux returns 1 (left) 2 my external soundcard out rear??? dont ask me y this works but NOT a sound now must of made a circuit!
JusZLiMiT 3 years ago 3
THAT'S A LIE!!! I OWN ONE!!!
l0uds0undz 3 years ago
im getting one :) cant wait to hear what it sounds like.
alieco 3 years ago
any one know ow to make vocals sound propa good on cubase with this mic because ive gt this mic too
RevolvaOfficialPage 3 years ago
reverb, hella compression, and Parametric Equalizer.
jaymitch23 3 years ago
safe bro whats dat on cubase then what type of reverb and that, then what percentage n shit thanks 4 this mate :D appreciated
RevolvaOfficialPage 3 years ago
Whoever clicked thumbs-down to the above comments, should actually make positive suggestions, rather than just bag other peoples. Thumbs down doesnt help any of us!
tailtaptailtap 3 years ago 14
I've had one of these for a year. Love it. Buying a second one to use them as overheads for drums. I'm EXCITED to see how they sound!!
richie3622 3 years ago
this mic's ok compared to the nt2a, the nt2a's a beast!
ICEx03 3 years ago
not bad for the money..i like it,i had to build a power supply for it ,to use in the field but that only took a few hours
audiofreeq 3 years ago 4
Yeah me2 NT1-A is just great. Love his sound. Verry nice! 4 that price :)
McgregorKLB 4 years ago
the NT1-A offers no self noise...(well next to zero self noise)...gives you the truth a bought what your recording...i own it ...great mic..!!
squidskunk 4 years ago
so you don't have that tape hiss shit in your recordings?-cuz i hate that shit,and since u said u bought it and from what i hear its tha shit-when i say tape hiss i mean like....when you play a cassette,and that noise comes in before tha song,thats what i keep gettin
lyricalgenius2008hdd 3 years ago
No - you can not eliminate tape hiss - that's the problem you deal with when using tape. Best thing to do is go to digital. We're talking about self-noise and to be honest, even with cheap chinese condensors it's hard to hear the self noise.
drewd1987 3 years ago
Do yall think its better than the samson co1u. Iv'e had the samson for about a year or so and it sounds great I use Cool Edit. Which is really old. But I dont know It sounds good to me. goto Myspace,com/DieverseBkilla lemme know what you guys think.
diverseent 4 years ago
I'm a music producer..RODE! I don't think it is! I KNOW SO dude! Samson? c'mon! Co1u is a usb toy mic for podcasting. $79.00
NT1-A $230
RODE has been doing PRO mics for over 40 years! and winning over NEUMANN and other.
The NT2-A is even better, then you go up a little NT2000 the up some more with the K2. I have lots of mics! Samson is not on the list.
Go to rodemic . com and hear them... ok?
girotube 4 years ago
I was lookin for you guys to visit the page, and check it out before you commented because A: people dont use it correctly. Listen to my music and tell me if the quality sucks. im not $12,000 professional but for 79 bucks it works. im trying to upgrade but dont know where to go. im sure this isnt the BEST MIC EVER either. thanks for the feeback thou
SpideyFan6010 4 years ago
need a better pod mic?
here: RODE Podcaster USB Dynamic Vocal Microphone $229
girotube 4 years ago
I listened to your tracks on your my space profile. I'm really feeling that "you can see me" track! Everything on it is great. The lyrics, the beat, the hook, everything except the most important thing! The delivery! There have been many over night sensations that have made on a mere single. "I KNOW" that if you would re-recored this track and really put some feeling into it the second time around, With proper promoting, It would definitely become an over night hit!
jheydude1 4 years ago
thanks man well it was for a person that I no longer hang with or do music with all of those trckas are .. i dunno a year or so old. But I wrote that in about..5 minutes.. LOL i was trying to sound sad, diffrent I dunno. That day an old neighborhood freind has gotten shot..So i was coming to term with that, and the guy on the chorus, sucks, he doesnt know the program like I do now, ive gotten way better but thanks alot man
SpideyFan6010 4 years ago
No problem. :)
jheydude1 4 years ago
O yeah and i went first just so you know
SpideyFan6010 4 years ago
I went first just so you know
SpideyFan6010 4 years ago
opps i didn;t know my comments posted.
SpideyFan6010 4 years ago
4 the price u cant get it betta than dat it sound great 4 a $80 mic
xclusive1287 4 years ago 2
I've got two of them... a pad and hi-pass would be nice but damnit, it's still a fantastic mic.
mogwix 4 years ago
How much is the Rode NT1-A?
541262 2 years ago
£135:00 in the UK but its better to buy matched pairs
woodlanduk 2 years ago
wots he best cheapest condenser microphone u can get i dont really wnana be paying anymore than 30 for it
techn9nekaliko 1 year ago
@techn9nekaliko im not sure if you have purchased a mic yet, but.. for $30 you probably arent going to find anything. But as for cheap and decent you should try the AudioTechnica AT2020, and possibly the MXL v67.
OnTheSpotRecording 1 year ago
@OnTheSpotRecording
i ment £30 , now im willin pay up to maybe about 60 dollars :) ok ill look that mic up tho and thanks :)
techn9nekaliko 1 year ago
best bang for you buck....
you just cant beat and NT1-A for the price
alfalfasprout69 4 years ago
which pre-amp are u lot using for the nt1-a?
kollizion1 4 years ago
such a great microphone to compliment my focusrite saffire
jrtsalazar 4 years ago
hell yea, ive got it, great mic
zepphead928 4 years ago 2
I use it for Foley work. It's hard to beat for price, with only 5db of self noise!
kaffeinsuchtiger 4 years ago
I love my sE 2200A :D
dazzelya 4 years ago
Foley? That's lovely, I'm aiming to buy one for the same task. I was watching Howel's Moving Castle the other day and was amazed at the low self-noise their mics had for all the foley work - and these were tiny sounds, like skin chafing and fabric moving. Hopefully this mic will get me a similar quality. ^_^
Fagottron 4 years ago
Plug 2 of these mics into a Fostex FR2 ...NOT the "LE",with so good blimp & softy covers,and dont forget low Capacitance high quality cables and you got a winning combination,but try to stay out of the Rain.
infraredtechnician 3 years ago
Yea, ive had the NT1A for two years now and it is everything they advertise it as. GREAT mic!
watchitnz 4 years ago