Added: 5 years ago
From: bioret
Views: 650,051
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (623)

Sign In or Sign Up now to post a comment!
  • @WhiteHornedMaster i didnt die!

    

  • i counted it. it was 9. amazing. haha

  • 18 secounds

  • @sebastiansoto112 Not 18 seconds. He was proving it was locked in the first few, THEN lock picked in 10 seconds... Dumbass be more observant...

  • U people that say it wasn't locked it was. He used a shim and thats the only reason he got it open so quick. He's stupid cuz it is a cheap ass lock. I can pick a A1100 lock in 25 to 45 seconds. Any good locksmiths will know the lock and know it's high quality.

  • All masterlocks have a rating on them, after a certain rating none of these BS ways work to pick them. If its a cheap lock, yes you can pop it easy enough. Most masterlocks that cost you more than $10 cant be picked it anything amounting to a worthwhile amount of time

  • lol i have this lock and i dont have to put in da code i rip it open

  • Mother fucker you waste my time :D

  • ok i dont think he even locked it i think it wasnt really locked and then he faked it :/ so..... FAKER

  • fukkin nerd

  • 1) Hold your breath.

    2) Copy all of these steps.

    3) Go to two other video.

    4) Paste it in the comments.

    If you can do all of this without breathing you're a good pot smoker

  • @hipperboy7055 FUCK YAH IM GOOD AT SMOKING POT

  • @hipperboy7055

    Shut up.

  • duh..... its ur lock

  • give me some bolt cutters and ill do it in half the time lol

    good vid

  • @R3dM0nDay nop. That was 18 seconds... I WANT MY MONEY BACK TOO!!!!

  • I can do it in 2.5 seconds lol

  • @phildo488 lol u got some good logic, j though the same thing

  • 613,226 views for a terrible 18 second video like this....what has the world come to...sigh

  • or u can just use bolt cutters and get the job done in 2 seconds

  • that was 15 seconds I WANT MY MONEY BACK!!!

  • @1cec10ud you can actually do it both ways: press the soda bottle thing and press it down meanwhile pulling the U on the lock or just stci the metal in and pull the U out.

  • omfg that is same type as every lock at my school for every locker D:

  • OH MY FUCKING GOD PEOPLE. Who gives a fuck if he took 10, 11, or 1404837367 seconds to pick the damn lock. It still gets the point across: these locks are worthless.

  • THAT WAS 11 SECONEDS

  • @haloshow99 TROL HOLE

  • nigga that was 18 second and that even worth the 578,010 nigga

  • @amboyznikka96 he didnt start till 8sec -_-....... troll

  • @SkyClawX fuck up fagget

  • @amboyznikka96 fuck up fagget???

    lmao your grammar/spelling is amazing good sir i hope you are not upset at the fact you are wrong.......troll

  • @SkyClawX just shut up nigga because i dont want to argue over the internet troll how the fuck you know im short stupid ass

  • THIS IS NOT PICKING. What he is holding is called a shim. Picking is where you have a tension wrench and a pick.

  • no fing shim please

  • this took him 11 seconds. at the beginning he was showing him it was locked so that doesnt count

  • that wasn't ten secs

  • Rename. "Picking a Master Lock in exactly 17 seconds"

  • i got it to work u have to turn the holder thing u put in in a circle and push and pull up

  • nice job!

  • ok i have tryed sooooo many times and cant

    

  • Comment removed

  • @randomsha5211 it actually works i did it in to school to my girlfriends sister locker on April fools day

  • For One:Thats the older kind dumbass

    For Two:That was 17 second retard

    For Three:Get a Life

  • this video is over 4 years old.

    yes i know... it takes alot of effort to look at the date of the video

  • @L3G3ND1162

    For 1: Learn to spell.

    For 2: Learn grammer.

    For 3: About 8 seconds was him showing us it's locked and then setting it up and getting it ready.

    For 4: A life? Seriously? Shut the fuck up.

    For five (My number five is broken :D): 7 seconds of your life wasted, am I right?

  • @silver2zilver spelling fail... *grammar

  • @silver2zilver What do you mean learn to spell? He spelled everything right. You, on the other hand...

  • @silver2zilver

    if you're going to demand that someone learn how to spell, then you must do the same... its "grammar" not 'grammer'.

  • @silver2zilver correction, bitch.

    1. Learn how to spell.

    2. Learn grammer.

    3. Learn how to spell GRAMMAR.

  • @L3G3ND1162 it was 11 seconds. and i'm pretty sure this kid has a life

  • omh idk how to do that with a dam soda can i made like 12 of those and i still sux

  • @JulioOdd4kky

    I made 2 during lunch today and messed up, turns out u have to wrap it around it to pick it

  • ^^ it was 10 seconds ^^

    starts at 0:07

  • u can make the ting out of a soda can its this little kid he shows u how to make thm

  • it took 14 sec but still thats cool

  • @evil4563 he first showed the lock, taking about 5 seconds, he started at 0:05 =)

  • its just a piece out of a can you can see a tutorial

  • he did do it in 10 sex morrons he showed the lock was well shut in the firts 7 secs >.>

  • 0:17 I know who you are.

  • um yea n u said it was under 10sec

  • lol

  • thanks alot my dude this really helped, finally cracked my lock to my chain around my bike... been tryin to remember the combination for a year or so

  • dude the video was 17sec. when he was putting the soda can in try on counting first before you say things that know one wants to here freaken MOFO

  • fuck off u little pussy cuz u kno your pussy azz cant do it u little fucker

  • @MrPops11  ohh fuck you

  • It was a great vid!

    'till you showed your face...-.-"

  • try not showing your face

  • hey everyone, u sub too me and i swear i will sub back!

  • nice video but i dont get how you do the stuff so fucked up=)

  • hey how do u make that thing that u hade in ur hand

  • try reading the description *rolls eyes*

  • i used scissors and made a guitar pick shape and it worked

  • lol not crackine thats shimming

  • DUMB FUCK!

  • noob

  • how?

  • Try ComboFinder for the iPhone or Ipod Touch in the App Store, It will do all the math for you and tell you the possible codes :)

  • that's not a master lock dumass

  • @R4WRG4SM Oh shut up, R4WR. You're annoying. Do people you know get annoyed by you?

  • i tried it.... long story short... IT DID NOT WORK!!!!!

  • Some Sweet Vidz

    watch?v=7Ue1SpIu-1k

    watch?v=qST53_orIcA

  • pop can cut into an M shape. this shits easy...

  • my lock fucking owns this vid, all i gota do is pull coz its really really shit

  • will this work on a 175?

  • @outraged70

    if the shim is thin enough, it should work on nearly all padlocks

  • thi is crackin al Lock NOT pick

  • Genius. Lazyprincell just proved the inaccuracy of this video and i cant believe nobody noticed this. OK everybody! stop watching this video because the guy doesn't actually pick the lock! HE DOESN'T GET IT OPEN ACCORDING TO LAZYPRINCELL AND I THINK HE'S RIGHT OMG!!!!!!!!!!!! THE TITLE IS WRONG WE MUST STOP WATCHING IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!

  • thx but ih colle lazyprince teh 2nd these are 2 i ;)

  • @joosbawks

    really? it worked when i tried it haha just get a pop can cut a flat piece off then make a somewhat pointy side, hard to explain easy to show.

  • @joosbawks woow someones a retard and his username is joosbawks and wow so stupid video woohhooo such a rebel

  • Cracking is finding the code stupid -w-

  • woa woa woa what the fuk as that shit he jus used? wat kinda help is this???

  • @MegaMrlong read the freaken more info

  • @Zaharkl read where is says "5 months ago" which means idgaf.

  • scam school goes over how to do this

  • what tool was that, he used to open it?

  • It's called a "Shim"

    Look it up

  • a shim?

  • i use the material in on a coke can then you have to cut it the right shape so it fits and also undoes the pins on the inside. try searching how to pick a lock with a coke can or something

  • just pice of a can

  • a coke but cut it

  • i just use a metal tube jam it inbetween and then push down

  • In that case, it's your own fault. Don't start blaming this guy because you didn't do enough recon. I always check for patrols or cameras before I try to pick any lock that is not my own.

  • Comment removed

  • cool

  • well duh dumb ass dont get caught

  • lol, funny

  • Comment removed

  • damn dude...

    ur

    so

    fucken

    cool

  • Wow your so fucking cool....

  • It actually took you about 12 seconds :P But still very, very cool. Nice video :D

  • Why didn't I know about this vid when I had gym!! >:P Oh well, anyways, that was cool :D

  • lol...he is a ape. what do you tink of a terorist.

  • Shimming is not picking.... you can't "pick" a combo lock unless it also has a key way

  • true it's being bypassed not picked

  • He is shimming the lock. Not picking it.

  • all i need is a sewing needle to pick a lock

  • IT WAS TEN SECONDSSSSSSS

  • Im trying to crack a school lock anybody know how comment me ?

  • Isn't a school lock just like this?

    You do it with a soda can.

  • it's nine seconds. it opens at 14 and he doesn't first touch the lock until 5

  • how do you make the pick thing???

  • with a pop can

  • that was not ten sec for your info. k

  • it was 9 sec 4uh info

  • Wow this way of lock picking is useless -_- But good job.

  • How so?

  • what do you use

  • i cant do it i keeps bending while its inside

  • that was not ten seconds, it was twelve.

  • lol

  • how you do dat???

  • IT WAS 11 SECONDS I COUNTED

  • nothing special. i hav been doing for years

  • haha he fuking ulgy

  • its way harder when its actually on a locker. this is nothing special.

  • very hard, broke my shim. good thing it was my lock.

  • your stupid that was 14 sec

  • First off, it's "you're", not "your". Second, he opened the lock in about 8 seconds. Go to school, Dave. Learn something.

  • fuck ya

  • Bahaha.  I just read this. The classic response of the idiot.

  • i love the nerdy ass face a the end, haha lol

  • hellyeah

  • 12 seconds

  • HOLY SHIT ITS THE SAME OMG I LOVE THIS

  • My friend bought a lockpicking set, 1 hr after we where able to lockpick masterlocks in just seconds (2-5 sec).

    True, once you know how and got the right tools ;)

  • lol i'd rather not be able to pick a lock then be able to and look like that

  • hahahahahaha

  • you have no life

    you even look like a quire

  • If you're going to act intelligent, please, learn to spell first. (Queer)

  • I speak serbian. fag

  • H'Omg, HI!

  • Well, first of all, it's Faggot,

    And when you made your second point..

    you put

    "Second of call" not "Second of all"

    OWNED!

  • LOL you nailed him right on the head with that one. Good job I was laughing my ass off.

    Reply to lalaRAWRimSHAUN

  • This takes 2 secs all ur doing is shanking the lock...

  • you can just hit it with a shoe... it also works srs

  • LOL I would suggest using a hammer though, don't wanna ruin the shoe.

  • what was that thing that u were using to open the lock

  • Learn how to read the description?