You're drifting around quite a bit and your altitude control is not quite locked in, Other then that you did a respectable job. That was quite sometime ago by now i''m sure you can really lock her into a rock sold hover.
Even though you're drifting around quite a bit and your altitude control is not quite looked in you still did a respectable job. Of course this video is kind of old so I'm assuming by now you can really lock into a rock solid hover.
thats not how the battery goes in, just a tip here, not insulting, it goes on the slanted tray above it. i think you put it there because thats how the belt cp did it.
@helipilot94 Yes i know this, was just a quick flight test and didnt have wires strapped yet and didnt want anything behing chewed up by the gear so mounted it this way.
Hey, I just got me one of these Heli`s, and I am really likeing what I`m seeing here...it looks really stable there.If I may ask, what brand of servos are you using.? Great flying!
Hi I have a belt cp and was thinking about doing an overhaul and buying this kit and tansfering all of my electronics, could you give me a link to this forum?
didnt do a thing, didnt even servo link lengths, they tracked perfect right out the box same with swash was level, have to go over the pitch settings but was to eager to post on forum so i will do that tomorrow.
This has been flagged as spam show
You're drifting around quite a bit and your altitude control is not quite locked in, Other then that you did a respectable job. That was quite sometime ago by now i''m sure you can really lock her into a rock sold hover.
Blaze1024 1 year ago
Even though you're drifting around quite a bit and your altitude control is not quite looked in you still did a respectable job. Of course this video is kind of old so I'm assuming by now you can really lock into a rock solid hover.
Blaze1024 1 year ago
how do you get it to hover so stable ?
1May1984 1 year ago
@1May1984 - simple practice and proper setup.
FatPumPumLovah 1 year ago
thats not how the battery goes in, just a tip here, not insulting, it goes on the slanted tray above it. i think you put it there because thats how the belt cp did it.
helipilot94 1 year ago
@helipilot94 Yes i know this, was just a quick flight test and didnt have wires strapped yet and didnt want anything behing chewed up by the gear so mounted it this way.
FatPumPumLovah 1 year ago
I have a CP V2
Would you give some info
To do the same!
Thanks
That was great
imager09 2 years ago
Are helicopters easy to fly? Then rc nitro planes?
hasanjohnh 2 years ago
Hi i just got one a few weeks ago. Very stable.
Deebo2226 3 years ago
where did you get this heli from?
lyclycsms 3 years ago
w w w . xheli . com /exi-450-arf-rc-helicopter.html
FatPumPumLovah 3 years ago
hey good hover. i just ordered one. what are you using for cyclic servos? what about tail servo and gyro and battery?
newbflyer101 3 years ago
Wow nice hover! 5 star dude!...
enoel 3 years ago
Hey, I just got me one of these Heli`s, and I am really likeing what I`m seeing here...it looks really stable there.If I may ask, what brand of servos are you using.? Great flying!
soulfulsinger80 3 years ago
I set this heli up for the guys at the Belt CP forum... so its all Esky Belt cp electrics inside except for the motor and ESC..
FatPumPumLovah 3 years ago
Hi I have a belt cp and was thinking about doing an overhaul and buying this kit and tansfering all of my electronics, could you give me a link to this forum?
eskybeltcpflyer 2 years ago
dier,
I see your battery is on the bottom part, do you have problem on the CG if it is place on the top holder???
akodin02 3 years ago
No, put it there, was not complete yet was a guick test flight, pictures on forum shows battery at top and esc where battery is in this video..
FatPumPumLovah 3 years ago
did you balance the plastic blade???
nice hover rock solid
akodin02 3 years ago
didnt do a thing, didnt even servo link lengths, they tracked perfect right out the box same with swash was level, have to go over the pitch settings but was to eager to post on forum so i will do that tomorrow.
FatPumPumLovah 3 years ago
i got a belt cp v2 what parts did ou use
YourFriendlyMe 2 years ago