and where have you learned that? magnetics can not fuck with a cd buddy, data is not written to a cd/dvd with a magnet, but with a LASER. the data is PHYSICALLY on the cd, burned into a thin layer of acrylic
@andrey2k8 All you have to do is open up the sub and connect the LED's to the sub output. Its not the best idea though as you will more than likely blow out the LED's and they will put more of a load on the subs amp.
wow i have a few views :P i forgot i even had this vid untill i got an email that someone commented on it aha
andrey2k8 4 months ago
You should also consider that you're sacrificing bass power for this, not alot, but a bit.
MudGoobz 4 months ago
The LEDs start to melt, because you didn't put a resistor, or a resistor of the right ohms.
I've put 4 Red LEDs in mine, I used 330 Resistors, and they all stay the same strength.
Depending on how many LEDS you use, and how you configure them.
4 banks of 1 = 320 to 350 roughly for the resistors
4 banks of 3, should be about 180.
You need to work out what you're doing before you throw things into a sub like this.
You should be able to tap your sub cone, and watch the LEDs turn on aswell.
MudGoobz 4 months ago
nice choice of song. me like :) btw, should do a tutorial on how to put in the leds!
bahok123 7 months ago
T U T O R I A L ----> /watch?v=apGt7uyl4J0
godSAvepolska 7 months ago
look this mod led !!
youtube.com/watch?v=gJcl3jLOLi0
Agriogatos08 1 year ago
Which version of day and night is playing in the beginning?
Wolf7221 1 year ago
where are this LED from. ?? because every LED i put on my sub they can't hadle the bass.
eDoox1 1 year ago
Use more higher voltage ones to play at high volume
punjabiboy99 1 year ago
that looks pretty cool.
XxEpicStarxX 1 year ago
where do you get themfrom, wats their actual name? lol
RAZllllBA 1 year ago
i hope you know that you lost your warranty by doin this
231V 1 year ago
i have 1 blue led and 1 green and when i do this i need to turn volume almoust max why
choosea44 1 year ago
the song is day en night from cid cudy
masterjumper1995 1 year ago
unless you built a circuit for the led's, youre putting a load on the amp that would eventually short out your amp
epicblaze2 2 years ago
so basically you just hooked up the leds to the sub channel
ThaNorwegianDude 2 years ago
5/5
thomaswnc 2 years ago
Did you use a tutorial? If so, can you gimme the link?
LehdaRi 2 years ago
@LehdaRi i did but it was ages ago and i dont really remember what i searched. just try lookin up on youtube. u should find somethin easily
andrey2k8 2 years ago
@andrey2k8 why dont you put resistors so they dont burn up?
L00peey 2 years ago
Set the Subwoofer on the floor for best audio image. And it's magnetic, so don't put your games near it.
TheWattershed 2 years ago
and where have you learned that? magnetics can not fuck with a cd buddy, data is not written to a cd/dvd with a magnet, but with a LASER. the data is PHYSICALLY on the cd, burned into a thin layer of acrylic
sexmebre 2 years ago
all of the song names are on the video
andrey2k8 2 years ago
can you tell me how you did it????
Bartekk2oo8 2 years ago
its long to explain just try searching on youtube for videos on how to do it.
andrey2k8 2 years ago
@andrey2k8 All you have to do is open up the sub and connect the LED's to the sub output. Its not the best idea though as you will more than likely blow out the LED's and they will put more of a load on the subs amp.
joshcj2006 1 year ago
@joshcj2006 Well, LED's barely use any power, i doubt the amp even notices it.
wippip 1 year ago
Kanns du mir mal verraten wie du das angestellt hast ?
Ich glaub ich würd mir das auch machen
Herbe Geil !!!!!!!!!!!!!!!
Goerdiiie 2 years ago
esti roman mai bine zis ?:)
alexuuuuuuuuuuuuuu 2 years ago
Wow.. i want that for my speakers
manutd36 2 years ago
check out my LOGITECH 5.1 SPEAKER MOD on my channel
XXJULIUSXX1993 2 years ago
that mean that you can't turn your system at max volume because you melt your led's?
razboinicudintitan 2 years ago
unfortunatly yes :( thats why ive taken them off now
andrey2k8 2 years ago
u need get some resistors in that circuit then broo
barevids 2 years ago
cum ai facut? :D
rapidistucfl 2 years ago
did u directly connect some channel's output to LEDs?
If yes, which channel, coz that partcular channel's driver will have less power delivered to speaker.
taranfx1 2 years ago
can i do this at my logitech z 2300?
PeleGiannisGalpe 2 years ago
yes
andrey2k8 2 years ago
cool!!! can u tell me how?? or is there any site which tells u how to do that??
PeleGiannisGalpe 2 years ago
deude that mod is fucking hot, how'd you do that
Igudsex 2 years ago
i didnt make this vid 2 be entertaining i made it to show my sub and the mod that can be done!!!!!!!!!
andrey2k8 2 years ago
wtf? this vid was boring...
darthmars1 2 years ago
gaping rectum
evildwarf 2 years ago
what song ?!
agza12345 3 years ago
cool i might try this too :)
LaamaX 3 years ago
omg you abuse andy about bein a paki n dat lol but you have arab money wtf andrey haha good shit lool
rhys18whitehead 3 years ago
Very Nice Mod!! I love my Z-5500 how did you do that? Cathoray lighting??
Reven856 3 years ago