lifter or bearing

[seapeddler]

Need a stethoscope to isolate that sound. Might even have been a bad wiper arm.

Ha, ha, ...

[ladygodia]

That sounds hypermega f*cked.

[real012]

My car quiets as you gas it but same noise, any ideas?

[Hybridlancer2000]

Can anyone look @ my videos. Im lost as to what could really be the problem

[holden88s10]

rod no mistake got 97 blazer go 2 spun rod bearings

[NelsonStJames]

Question, did an oil leak accompany this problem, and did it lessen somewhat if you added oil. People always say "lifter tick" but what I'm hearing is a rattle. Almost like something is loose. I ask, because I'm hearing the same thing on a '97 Suzuki Esteem.

[rebeldawg124009]

rod knock the rod bearing are done and now u need a new crank also lol

[JPARKERZ28]

your engine got so hot it warped the heads... thats why it had white smoke head gaskets are gone. sounds like you still drove it after that... plan on a new engine, although by now i am sure you know that

[GodspeedAdam]

thats defiantly no lifter

[shinyfuzzy]

sounds like rod nock but the guy said its a spun bearing so whatevers

[JPARKERZ28]

@shinyfuzzy same thing

[honduran718]

i have a vid with the same problem.. anybody know if you could put a 95 short block on a 94.. ? are the 94 and 95 short blocks the same?

[bonsleezee]

Bearing. I had a BMW inline 6 that spun a rod bearing and it sounded exactly the same.

[mrgreen386dls]

i was gonna agree with everyone that says its a rod bearing.....you can def hear the loud thud...i can also hear the valves.....so good luck!

[sesalam]

My engine makes that noise too, but not as loud as in the vid..anyone know if there's any chance of fixing it?

[boriloco76]

rod bearing !!!! goneeeeeeeeeeeee!!!

[neilnmar]

Rod bearing. Notice how it gets louder with the rpm's.

[oxcide101]

can you fix spun bearing by replacing short block?

[jacksonmakemefeel]

sound bad bearing

[camhousley]

100% Rod Knock srry bud your engine is thru

[icystabbedme]

My Dad's Stealth just started knocking today and sounds quite similar to this. The oilpan being dented leads me to believe it's a bearing. :(

[hollyholk]

yes in deed it is every 3s car when oil pan is dented you will spin a bearing congrats your in the club with the rest of us

[bonsleezee]

@icystabbedme if the oil pan is dented it threw somthing. more than likley the end cap

[disco2digger]

not a lifter

[BBBSCHOTT]

good by v6

[REBEL2250]

does it have loss of power when you accelerate? sounds to me like a bearing since my engine made the same noise before it blew. sorry to say it but your engines fucked.

[MrHellokitty5]

it sounds like a rod bering bc a rod would have a high pitch noise

[blue03r6]

all I know is when my spun a rod bearing it lost all power. the truck would't go past 35mph.

[wootness3000]

Guys... DOHC, it doesn't have push rods.

[REBEL2250]

lol

[crvplow]

@wootness3000 piston rods.. everyengine has piston rods or connecting rods.

[mirandamp2004]

Def not a lifter.possible rod or piston splap, def engine has to be inspected. amust. to proper diagnose. and anyway u r looking into a mayor repair. If u are mech experience, check clearances with plastigage and tolarance all the way around the block and internals.

[Jorge3KGT]

Been there with my N/A. Its a rod bearing. Remove the oil pan and physically check for play where the connecting rod meets the crankshaft journal. Its easy to check but a pain to fix. Sorry.

[xMiltonx4]

bearing haha holy shit im glad i only got a lifter tick sorry man, it all sucks big fatty cock.

[miasmablk]

haha definitely not a lifter jeez that sucks bro

[evillemaniac92]

haha, yeah, rod bearing dude... pull the motor time!

[25rsboy]

holy crap thats a rod bearing for sure.

[marko308]

Trust in ROD!

[andlys]

holy rod bearings batman

[7ford7man]

id say a rod bearing, but dont be revving it , you could put it through ur block

[350znismo]

ur spark plugs cover is blue mines is red! ahaha i noe it might sound nonesense but i just wanted to said that and im happy that u fixed ur car i love 3000gt's its my dirst car and i love it!!!

[oxj0kerxo]

yea i fixed it i only had about $300 into it because i found another just motor i took the stuff out of and just had it all checked and put that stuff in and now i have other extra parts to sell or keep for later problems

[seasonedtoker]

@oxj0kerxo that's not the wisest thing to do. if you already have a spare motor, throw that in. no one can asure you old and used components that you recycled will wear properly after.

[levani041491]

do you git fixed????

what was wrong

[oxj0kerxo]

it was a rod bearing so it ended up needing a crank and rod for all who were interested

[levani041491]

thn you fixed it or no???

if yu did haw mach it cost you???

[davison1021]

ouch

[BigDogRoadSide]

That is definatly a rod bearing...time to rebuild

[350znismo]

dawm good thing i saw this video! mines is berly but BERLY starting doing that noise!!!!

thanx every1!

[iwreckedsk8ing]

spun bearing... agree!

[1BadTwinTurbo]

Thats not lifters... Spun bearing... see if ur oil pan is dented, if so then its most likley spun bearing. lifter tick has a less "deep" tone to the ticking sound

[GarrettFlett]

check the water pump

[OFthePeople]

rod kncok knock

[jneil11]

I know that this noise in my own was the Crank Bearing! the oil pickup tube is too short from the factory, causing poor oiling when the oil is distributed throughout the motor during higher RPMs.....get it fixed NOW before it costs you 3800.00 like it did me 2months ago!!!

[telinkeo]

stop the copy paste xD

[3000gt0323]

i noticed that too...lol..wtf

[Lje123]

My money is on it being a rod bearing. Be sure to tell us what it was!

[nongboof]

I'd say the engine is FUBAR.

[taws6ls1]

music to my ears

[oxj0kerxo]

it was a spun bearing i havent been on here in a long time to update but thats what it was and i bought the car with that sound so i never knew what was wrong with it but i tore it apart all the bearings needed replaced but just the one was bad so i changed them all but the crank was a little uneven so thats where im at now in need of a crank i believe

[adhdkid918]

thats a lifter, 100% sure, and head gasket wouldn't make that noise, it'd just leak oil

[initrm]

if it was lifter the noise would go away when raving. but bearings noise gets even louder.

[adhdkid918]

thats a lifter, 100% sure, and head gasket wouldn't make that noise, it'd just leak oil

[3rdSuspension]

I say Rod Knock.

[Deeepinsideyouu]

blown head gasket...

[king3000gt]

id say bearing

[yourtubeyourass21]

mah

[yourtubeyourass21]

Defint not lifers. If its a spun bearing you will defint notice it right away. that is to DAMN noisy for it to be a lifer tick.

[deskpro05]

check out my video it made the same noise and still ran check it out!

[aznk1d2]

Turn it off!!!!!!!!!!!!!!! yeah its a spun bearing, that or all of your lifters went at one time, and i highly doubt that

[apachepunjabi]

jesus christ that is most def. bearings bro..

[superturbodiesel]

With that kind of racket, I'd certainly check my rod bearings at the crankshaft! Sounds to me like she's about ready to come apart. You can check the cam lifters too, but I doubt that's what that is. Do you have any oil pressure? How often have you been changing the oil?  Geeze man... Good luck. I think you are on your way to an engine overhaul.

[travvy130]

My car makes the same noise. If you drive it and you still have power then its prolly just the lifters but if your hesistating and losing power its prolly bearing