no no, i not saying itd slow them down, i was more so thinking that the transfer line get caught in the rod hook cause it spins he odd time and thhe lines resting right against them
your derrickhand doesnt even stable the transfer for the boys spinning haha, the way i was taught was to never throw the rod into the elevator until the connections just about to be snapped. lol you boys ever get the transfer line stuck in the blocks from the rod sticking to the elevator when buddy spins? lol
@bigwoodz420 Uhh, no. We've been latching on for years and no problem whatsoever as long as like you say, the derrick hand centers it. Did it myself up there for a long time. Never slowed down the floorhands at all.
he picks up the next hang that fast because the roughneck should be ready for it so he can get his wrench on it, if it hits the roughneck in the face its the roughnecks own stupid fault
@doggbiter When the operator picks up the blocks the wrench hand should already be ready for the next double/triple. My guys are ready for the next one as fast as the derrick hand can pick it up.
@doggbiter Lol, ok. Once it's tight, I'll pick up on it and the derrick hand immediately moves to grab another triple as soon as I start down. By the time the wrench had puts his wrench on it I'm pretty much at the rod table. As soon as I set down and start back up (which after watching your vid takes nowhere near as long as you) the derrick hand sets it down and it gets wrenched in. Next time we're tripping rods I'll try to get a vid and show you what I'm talking about.
These guys are slow compared to the guys at Oil Well service co. in Long Beach. You should see the block coming down when they are on a job, its like a guillotine it's moving so fast practically. I guess these guys are not too bad though.
Wow. I guess nobody here knows what their looking at. This is a pulling unit. NOT a drilling rig. They are not roughnecks. They're hands, and by the looks of it, slow hands. When my crew trips rods, those blocks never stop moving.
looks good to me, latching up during rotation is ok as long as you and the driller pay attention. Harder for roughneck's using wrenches though. That's how we do it in Saskatchewan.
you arent exactly holding your transfer straight there for the roughnecks on the floor...ive never seen anyone trip rods like this...you must be american
looks like that same hand that got the drink took to him
LeadfootPTM 3 weeks ago
pioneer drilling is the lowest paid mutha fucka out there
2005kandc 1 month ago
no no, i not saying itd slow them down, i was more so thinking that the transfer line get caught in the rod hook cause it spins he odd time and thhe lines resting right against them
bigwoodz420 1 month ago
your derrickhand doesnt even stable the transfer for the boys spinning haha, the way i was taught was to never throw the rod into the elevator until the connections just about to be snapped. lol you boys ever get the transfer line stuck in the blocks from the rod sticking to the elevator when buddy spins? lol
bigwoodz420 2 months ago
@bigwoodz420 Uhh, no. We've been latching on for years and no problem whatsoever as long as like you say, the derrick hand centers it. Did it myself up there for a long time. Never slowed down the floorhands at all.
scourge34 2 months ago
holy shit i been wastin my time bustin ass on a drillin rig all this time i shoulda been on that gravy mofo
jeremylewis83 10 months ago
damn first time i ever seen a juranamo line actually being used
korndawgz420 11 months ago
wow, i never have seen a workover crew go that slow
mongration 11 months ago
I wish I was helping.
JEMCO2008 11 months ago
circus rig!
candyapplef150 1 year ago
he picks up the next hang that fast because the roughneck should be ready for it so he can get his wrench on it, if it hits the roughneck in the face its the roughnecks own stupid fault
nicto123 1 year ago
slow grup bro
palma1218 1 year ago
why does he pik the next hang so soon?
Answer- so he can slap the floorhand with it, and get him shitty
doggbiter 2 years ago
@doggbiter lol i used to be guilty of that myself
rig1runnin1machine 2 years ago
@doggbiter When the operator picks up the blocks the wrench hand should already be ready for the next double/triple. My guys are ready for the next one as fast as the derrick hand can pick it up.
scourge34 1 year ago
@scourge34 Your guys are retarded, are they gonna screw it into the rod table? or what?
doggbiter 2 months ago
@doggbiter Lol, ok. Once it's tight, I'll pick up on it and the derrick hand immediately moves to grab another triple as soon as I start down. By the time the wrench had puts his wrench on it I'm pretty much at the rod table. As soon as I set down and start back up (which after watching your vid takes nowhere near as long as you) the derrick hand sets it down and it gets wrenched in. Next time we're tripping rods I'll try to get a vid and show you what I'm talking about.
scourge34 2 months ago
These guys are slow compared to the guys at Oil Well service co. in Long Beach. You should see the block coming down when they are on a job, its like a guillotine it's moving so fast practically. I guess these guys are not too bad though.
RainJetSprinklers 2 years ago
Wow. I guess nobody here knows what their looking at. This is a pulling unit. NOT a drilling rig. They are not roughnecks. They're hands, and by the looks of it, slow hands. When my crew trips rods, those blocks never stop moving.
dsmtuner7 2 years ago
@dsmtuner7
..By roughnecks only being on a drilling rig I'm sure you mean maids and painters?
userx100 1 year ago
looks good to me, latching up during rotation is ok as long as you and the driller pay attention. Harder for roughneck's using wrenches though. That's how we do it in Saskatchewan.
scliff7 2 years ago
almost done
JEMCO2008 2 years ago
dont you love spinning with one hand and trying to hold the rod strait with the other? i bet there ruffies have gotten good at it
j420666 2 years ago
LOOKS OK TO ME
caretaker12887 2 years ago
Don't transer the rod until it's made up, worm!
strengthofliberty 2 years ago
you arent exactly holding your transfer straight there for the roughnecks on the floor...ive never seen anyone trip rods like this...you must be american
V155 3 years ago
pura BASIC
erikfierro 3 years ago