worst possible way to put a tire on a rim. When you use a tire lever (or screwdriver like some of you say) you will squeeze the inner tube which will result in (faster) punctures.
Hey man, thanks for the video, now I just have one more problem. What is the little stem on the valve is somehow blown off and you can no longer tighten your valve shut because there is no spinning nut or w/e. Can you buy replacements for those or do you just have to buy a completely new tube? Thank You.
@Insertnamesz If it is a Presta Valve nipple, I did not know they came out. For Schrader, not as shown in the vidio, they come out if unscrewed and are interchageable. Get one from a discarded bike tube is easiest. It takes a little tool to remove or the cap on green slime bottle will often do it. I think you can buy also these valves. Still need tool or slotted valve cap to tighten.
Ok so I'm doing everything right. Got the second bead insertted around to the space of about four spokes left to go and its a bitch. I've done this a bunch of times before, but its such a bitch that I wanted to make sure I had it right. What a terrible wheel/tire combo. I've got gatorskins too. Even mechanics have cursed at trying to get the tire back on.
I've never seen it done quite this way. Is it O.K. to slide the lever as is shown? Is it not better to use three levers, popping out the tire, bit by bit, removing and replacing levers as you go?
Also, is it all right to break the bead–hook seal, by hand?
Well done! I was showing my wife how to do this...and it wasn't so fun. After seeing this video she started practicing and is still laughing about some of the comments.
Class video thanks guys
darthgremlin3 1 month ago
Is that the penis guy from Jackass?
philippfuelb 4 months ago
worst possible way to put a tire on a rim. When you use a tire lever (or screwdriver like some of you say) you will squeeze the inner tube which will result in (faster) punctures.
You can only use your hands!
jogiken 4 months ago
im gay
xXLuiGeEXx1 4 months ago
@xXLuiGeEXx1 you are gay?
dodosGal 2 months ago
I always trouble putting the tire on! taking it off is piece of cake
seigneurvoland666 5 months ago
Just used tips from this vid– worked! thanks for the explanation and demonstration!
killerrockssm 6 months ago
Excellent explanation, one step was the problem and your example cleared it up and allowed me successfully and quickly replace the tube.
nadhifu2 7 months ago
thank you soooo very much!!! i had a problem putting my tire back but this video helped me a lot!!!
anyonelala 7 months ago
fuck that. i use a screw driver
nonginger 7 months ago
Hey man, thanks for the video, now I just have one more problem. What is the little stem on the valve is somehow blown off and you can no longer tighten your valve shut because there is no spinning nut or w/e. Can you buy replacements for those or do you just have to buy a completely new tube? Thank You.
Insertnamesz 8 months ago
@Insertnamesz If it is a Presta Valve nipple, I did not know they came out. For Schrader, not as shown in the vidio, they come out if unscrewed and are interchageable. Get one from a discarded bike tube is easiest. It takes a little tool to remove or the cap on green slime bottle will often do it. I think you can buy also these valves. Still need tool or slotted valve cap to tighten.
monrovia3461 7 months ago
@monrovia3461 Vittoria PV Cores 30mm 10/Pack Google this
monrovia3461 7 months ago
Comment removed
monrovia3461 7 months ago
nipple!
Bahbohram 9 months ago 2
Ok so I'm doing everything right. Got the second bead insertted around to the space of about four spokes left to go and its a bitch. I've done this a bunch of times before, but its such a bitch that I wanted to make sure I had it right. What a terrible wheel/tire combo. I've got gatorskins too. Even mechanics have cursed at trying to get the tire back on.
dharmapunk777 10 months ago
Thanks for the help!
AproposOfWetSnow 10 months ago
I've never seen it done quite this way. Is it O.K. to slide the lever as is shown? Is it not better to use three levers, popping out the tire, bit by bit, removing and replacing levers as you go?
Also, is it all right to break the bead–hook seal, by hand?
Commando303X 1 year ago
Thank you very much for posting this video. It was very helpful. Regards,
sonnetg 1 year ago
Nipple! this vid helped a lot!
mistahdabolina 1 year ago
I need to know how to put the tire back on .
Sports564 1 year ago 2
Gatorskin is a nice brand of tires, I got a pair on my road bike
Kawiia17 1 year ago
nice
flippyflapalex960 1 year ago
Well done! I was showing my wife how to do this...and it wasn't so fun. After seeing this video she started practicing and is still laughing about some of the comments.
Quecheelakes 1 year ago
hahahah Avatar 3d was pretty badass but this is still good
xxbondsxx 2 years ago 2
Your videos are the best biketube, consider making an instructional on fixed gear conversion or chain removal?
Thanks.
Rawr454 2 years ago
@Rawr454 they did one hilarious video on cutting down bolts for making a double chainring crank into a single
xxbondsxx 2 years ago