Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (69)

Sign In or Sign Up now to post a comment!
  • if i want to upgrade my headlights to HIDs what type of bulbs should i buy?

  • @fomocogt90 It depends on the projector bulb size

  • WOW you could like jerk off to this beat!

  • after you install your new custom headlights and taillights, remember to rotate the bill of your cap to behind your head, and definitely don't forget you work the night shift at pizza hut this weekend.

  • lmao, this is so much easier than my '11 stang....

  • Hey man thanks for the video and I saw the how to install LEDs and halo video too. Thanks again.

    I also would like to know for the ford mustang 2002 do I cut into the parking lights section (from my car to headlights)? and not into the main light? In the other video it showed a different car and the i think the process is different.

  • @Moy2005 are you trying to wire your halo's and LED? you need to figure out which wires are your parking lights and splice those and wire them together with the halos and LED. hope this helps

  • @Specdtuninginfo Hi, ya I was trying to do it, I just installed them yesterday and I'm back to let everyone know that you can get the supply's from Radio Shack. For my 2002 Mustang, It was the Parking Lights that I had to tap into. Also Its the middle wire that is the power (Brown wire) that you need to tap into. And the Black is negative. Very easy to install and thank you for your how to videos. they really help man! THANK YOU SO MUCH!

  • @Moy2005 glad our tutorial helped you! =D 

  • Just*

  • Is there a video on wiring for the led and halos?? I juat got mine for my silverado!!

  • check ebay for cheaper then usa muscle. i just got mine today they look great!

  • "we will start by popping the hood."

    thanks.

  • hello like to know where you bought it, angel eyes for your Mustang

  • i try to find this song but i can't find it no where xD?

  • I'm in a debate.... get the Black or chrome version for my 99 Honda civic. .. its green.

  • @Shortwhitedoood91 Chrome always looks good, but that is just my opinion. When in doubt, do what I do... Flip a coin! ;)

  • @Specdtuninginfo ..thats exactly what my dad said Lol.... but I went with the chrome. But I have a question.. with LED lights.. will I have to do any re-wiring .. or is that with HIDs?

  • @Shortwhitedoood91 Led and the halo's need to be re-wired. HID's would require some wiring as well.

  • @Shortwhitedoood91 Well, My lights still never came in. For anyone that reads this. don't do business with ProTuningLab(dot)com

  • @Shortwhitedoood91 Sorry to hear that sir. Hope you get the issue resolved!

  • @Shortwhitedoood91 same thing for 360 tuners. I ordered lights from them and they never came in

    

  • i used to have some of these lights and boy they looked nice with the led and halos.

    just loved it.

    however the projector lights sucked and they didnt shine the road up good at all so i switched it back to stock and the stock ones were brighter.

    got hids now and love them

    i tried putting hid lights on the projectors but they didnt fit so yea

  • i wanna know if the balcked out version is still bright which one should i get

  • @c0p555 The black or chrome version will have the same headlight brightness. The projector lens isolates the beam so that the power of the lights will come out straight on to the road. Unlike, standard headlights that require the reflection from the housing. Thanks again good luck.

  • @Specdtuninginfo okay thanks

  • why did you guys reccomend the wire crimpers and connecters? was that done before you put in the headlights or are they that easy to just swap out?

  • @suprbird Actually, you don't really need the crimpers, but you do wanna have some connectors to splice them into your parking lights. The tools are only recommended if you wanna use your halo and LEDs. I hope it helped, thanks and good luck.

  • @Specdtuninginfo I have factory lights, was hoping that it would be as easy in the video to swap.

  • @suprbird Factory lights will be much easier, since you don't have the tap any of the wires. Thanks and goodluck

  • @Specdtuninginfo thank you for the help!!

  • @suprbird Thank you suprbird.

  • Those angel eyes on that mustang are not ONLY uglier than shit but they are down right disgusting, Angel eyes should and only belong on cars that come stock with them. These just look like they depreciate the value of the car and it adds about 100 more checks for cheapness.

  • @olverafam Beauty is in the eye of the beholder.

  • @Specdtuninginfo It's all good bro the car is badass but the headlights are ughhh.

  • Are the LEDs more blue or are they whitish?

  • @hossini I hate to say it, but the color is both, depending on how dark (half cresent moon) the night is, the color will come out slightly bluish, but on more brighter nights (full moon) the lights will appear to look more white. I hoped that this helped, thanks and goodluck.

  • the intro is so dumb and unly and awkward

  • @lote1234567891011 We respect your opinion, however, the video was not easy to make. Sorry to sound bias; but we love the video. Thanks

  • what's the song :)?

  • @X2N18 violet sause is the song that is in the video. Thanks for asking, we like it a lot too. its in every video. :)

  • I heard that these have been known to get water in them easily

  • @bowlofarthritus Depending on the brand. The TM brand headlights and tail lights hardly have that problem. We always recommend that there is a pre seal any headlights with our video to help prevent moisture. good luck.

  • yeah you don't need any tools. I have these lights.

  • ok, thank you

  • I saw the recommended tools, but didn't see them needed

  • @paullabute Sorry, the tools are shown because the headlights have Halo and LED which require those lights to be spliced into the parking lights. We only showed the video where we have a deminstration of those lights being spliced.

  • did i miss the part where you used the tools needed. looks like you didn't need any tools

  • @paullabute The recommended tools to be used can be seen at 0:34 seconds on the video. Thank you

  • looks like you used your fingers, did i miss the part where you used the tools needed.

  • i just oeder the same light from ebay and i just got them but i dont know how to install them idk wat wire to connect u dint show that but i some wat understood ur video its a real good video

  • @moneymaker830 We have a halo and LED wiring video. To find it, please got to the list of videos that we have and search How to wire halo and LED video. Sorry I cant put a link. However, the video is really detailed about the concept of wiring. Thank you and good luck.

  • wow and here im thinking I gotta take the whole bumper off thank god I saw this !

  • @bronxmade79 Thanks for your comments. We are glad that it helped you to make the installation easier. Thanks again, good luck.

  • projectors are ricers and there ugly!

  • @bansheestang81 Pretty much the "eye of the beholder", thanks

  • @bansheestang81 Pretty much the "eye of the beholder", thanks

  • yes i have lots of bolt ons but i can keep up with ss camaros so have a nice day.

  • The replacement of the headlights is really simple. Just simply follow our step by step, you should have no major issue of installing the projector headlights. We do recommend that before you headlights comes in, take a look at your vehicle and see if any area that you might will get stuck. So that you can email us for any questions.

  • Please carefully take a look at the clip where, it might be lock and this might be the issue. If its still not able to take it off. simply take a picture and email to us so that we can take a look at this matter for you.

  • Okay my headlights are too high how do I adjust them. I have the halo led lights. I see the one adjustment screw but it seems like it does nothing. Please console me on this. :) Thanks

  • Will recommend you to park your car about 15-20 Feet away from the wall and, turn the adjustment screw. You will see the light level going up or down. If you keep turning the screw and nothing is happening. You might want to contact the buyer for this matter.

  • yes i'll like to know will these fit into HID as well, because from what i had read ( correct me if im wrong )is that there are some modifications needed.

  • Yes, if you purchase any after market HID, there might be a chance that it will minor modification that is needed. But we know that there is a vendor that carry a brand of HID that fit perfectly into these headlights.

  • very nice video, but i have a few questions:

    1.) on my bumper there are fog lights, is it possible to tab the halo rim into the fog lights?

    2.) will these headlights fit into hid kits and what type of bulbs does it fit>

    3.) how well does these projector project? can i see them at night?

  • Thank you very much on leaving comment on our video, as to answer your question:

    1.) Yes, its possible to tab the wires into your fog lights or anywhere you perfer

    2.) These will fit into H1 lights bulbs, but we do apologzie but we do not carry any HID for it, but we know an oversea vendor for this.

    3.) That is a good question, is kinda hard for me to explain, so what im gonna do is to film a night video for you, so that you can tell how nice it will look in the dark.

  • WoW thanks! this helped alot!

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more