actually those are real spoon sw388's. the real spoon wheels dont have a lip for wheel weights for balancing. if you look at the rota slips they have a lip for the weights.
i had a eg just like this just didnt have the carbon fiber lip and rims but i think my rims are better but in saying that i think this eg has more of a jdm look to is my civic i wud say made an easy 180 hp+ b18c1 with extracotrs cam gears full exhuast system
it WAS only ~125 WHP but that was a very harsh dyno - to give you an idea an i/h/e B18C2 in good condition pulled a bit less than me if I remember correctly - hey Reinhard ? lol..
@turbosti04 Oh shit sorry folks :S Just went back through the vid and have just noticed he does say 123 Hp. But at the wheels for a near enough stock b16 isn't bad.
emmm, it was done before the spoon cam. after the spoon cam, he did same 1/4 mile time as my civic, my civic has jdm b18c vtir. thats pretty good, cos his is b16a.
haha at all the idiots.. aus dyno read the least.. and auto salon dyno is even lower reading.. on yanks dyno this civic prob read about 170whp at least..
WHP is always less dan BHP!!!!! a B16 is 150-200BHP wit slight mods like an exhaust and chiping but at 170BHP it will rolling road at about 120WHP!!!!!!!!!!!!!!!
Lmao, No manifold in the world could do that. It has a Vtec engine in it. Vtec opens very strong in this car. It can't have a B because a Stock B16 pulls 140ish
123 wheel HP? Seriously? He must be pushing a simple 160 from a JDM B16 but come on it's Spoon! Seems like it should be doing better than that... Very clean hatch though, well done.
hey i was there watching that, in fact i have in on my phone. i was the annoying teenager asking all the questions :P. btw do you know the guy (Bede) that owns it? i cant get on to vtechnique anymore...
triangle sticker = Advan
Wheels = Spoon SW388
killacamry24 4 months ago
What's that triangle sticker on top of the side marker?
MrOmwk 5 months ago
WHAT WHEELS ARE THOSE????????????????
punkthrasher13 6 months ago
what make are these rims?
MaddDriFTer2010 9 months ago
@MaddDriFTer2010 Rota Slips
SteveSaeteurn 8 months ago
@SteveSaeteurn
actually those are real spoon sw388's. the real spoon wheels dont have a lip for wheel weights for balancing. if you look at the rota slips they have a lip for the weights.
steveeeeboi 7 months ago
@steveeeeboi I never knew that.. haha. Thanks. I don't know much about my wheels to be honest.
SteveSaeteurn 7 months ago
@SteveSaeteurn
It's pretty important to learn to spot the fakes so you don't get ripped off
steveeeeboi 7 months ago
VTEC just kicked in YO!
hondaresan 9 months ago
nice spoon looking EG. well done! mate. 120hp on front wheel is really impressive for a sohc vtec engine.
boyjkl1121 1 year ago
You gotta be kidding me it is all spooned out and it only has a single cam lol
it looks clean tho(:
sire310eg6 1 year ago
Now that's a car!
Arai4lpinestars 1 year ago
nice Si hatch
vtecnegro85 1 year ago
this car is way clean! wanna trade?! haha
FamousSAS01 1 year ago
lol 120 hp? haha stock itr runs 200! must b single cam!
tikihawaiian 1 year ago
This looks is my dream.
lurve13foreva 1 year ago
i had a eg just like this just didnt have the carbon fiber lip and rims but i think my rims are better but in saying that i think this eg has more of a jdm look to is my civic i wud say made an easy 180 hp+ b18c1 with extracotrs cam gears full exhuast system
gokuman63 1 year ago
i got the very same car but the only difference is that my car is pushing 245hp clean>>
diegovargas14 1 year ago
yo man love the whole damn car, but where u get those rims at.... i have yet to find some
quintonboffy 1 year ago
@quintonboffy rota slipstream are exactly the same... rarerims.co.uk
20vtrueno 1 year ago
HAHA that's MY car LOL..
it WAS only ~125 WHP but that was a very harsh dyno - to give you an idea an i/h/e B18C2 in good condition pulled a bit less than me if I remember correctly - hey Reinhard ? lol..
JDM B16A (gen2), Tanabe 4-2-1 (2" collector), Spoon ECU, Spoon N1 cat-back, Spoon Cam-Gears (set at zero), Spoon Leads etc.. JDM EG6 Y21 Gearbox..
AFR was REALLY rich..
VT3Chnique 1 year ago
@VT3Chnique
i have b18c2 with i/h/e, i pull 146fwhp.
hks071 1 year ago
thats one of the sad things about these cars -> fwd :(
paladain54 1 year ago
God does nobody listen? 121Kw the guy said, which in turn is about 170-180hp.
obbyb1 1 year ago
@obbyb1 he actually said 92kw and 123 hp. but he is probably running a stock b16 and unless its really built thats pretty common for a b16
turbosti04 1 year ago
@turbosti04 Oh shit sorry folks :S Just went back through the vid and have just noticed he does say 123 Hp. But at the wheels for a near enough stock b16 isn't bad.
obbyb1 1 year ago
120kw not 120whp folks....
Tougemaster06 1 year ago
i thought spoon engines all reved up to like 12000rpm
shockis1 1 year ago
People dont realize that 160 whp in a 2000 lb hatch is a quick car...retards.
MiChAeLrIdEsBmX 1 year ago 2
@MiChAeLrIdEsBmX true fact
unholyline 1 year ago
are you people serious? The guy said 120 kilowatts which is about 160 whp,so its not too bad.
bridgeport13b 1 year ago
wtf?!?! thats shite!
WillJPalmer 1 year ago
100 bucks says he has a vtec-e, thats a plausible reason for that 123 hp
Greendruid1234 1 year ago
I have a 91 Honda with B18a1/LS1 setup and its 160 this is lame.
ImportRacer4Life 1 year ago
120? My grandma is faster than that! Hope you do major engine mods
JesseGunzo 2 years ago
121 hp? lmfao hahahahaha... come on 4 real.. my old 1989 honda accord "stock" was around 121.... this is some kinda joke right?
Tnesjed 2 years ago
120hp? :/
serge805 2 years ago
@serge805
Really? It only has 120hp?
Fight2Exist 2 years ago
emmm, it was done before the spoon cam. after the spoon cam, he did same 1/4 mile time as my civic, my civic has jdm b18c vtir. thats pretty good, cos his is b16a.
hks071 2 years ago
This uses a stock catalystic converter right? Or if you have the pipe does it take it out?
BloodSig101 2 years ago
Never heard anyone so excited about 120whp
k3kc3000 2 years ago 17
@k3kc3000 its killawatts not horsepower, its 120kilowatts = 160whp lol
INSANEFREAK1 1 year ago 2
@INSANEFREAK1 It's weird that the announcer said 120 kilowatts, but then said 121 horsepower.
wajalama 9 months ago
thats how my eg sounds when the vtec kicks in, im running a JDM B18c
DRFTBling711 2 years ago
damnn i could hear the vtec kick in
sokezy 2 years ago 23
Thats a ls/vtec set up!
31compton13 2 years ago
thats soft.
RussianPIMP64 2 years ago
haha at all the idiots.. aus dyno read the least.. and auto salon dyno is even lower reading.. on yanks dyno this civic prob read about 170whp at least..
UWAFY 2 years ago
WHP is always less dan BHP!!!!! a B16 is 150-200BHP wit slight mods like an exhaust and chiping but at 170BHP it will rolling road at about 120WHP!!!!!!!!!!!!!!!
eoin0brien 3 years ago
wtf he didnt even push the car at all
SPLBeast 3 years ago
121hp WTF
hondannyboy 3 years ago
bubble makes 123 hp....i think it has a single with a vtec manifold to make it sound like it has vtec
NYFINEST20 3 years ago
Lmao, No manifold in the world could do that. It has a Vtec engine in it. Vtec opens very strong in this car. It can't have a B because a Stock B16 pulls 140ish
CarefullySleek 3 years ago
if that waz a real spoon it deff would of made atleast 225 to the wheels
puertoricanEX0 3 years ago
haha what?
fasthonda 3 years ago
it is the HP from the wheels, not the motor itself.
renegadeGM 3 years ago
what dose that mean lol i dont understand...whats the difference.?
VIKTOR251 3 years ago
there is less friction on spinining rollers so u get more hp on the street there is more so u get less hp
bigdog813 3 years ago
you should see my EG ;)
AznSlick786 3 years ago
I think their dyno is wack.
fasthonda 3 years ago 2
beautiful sound!! good video bro..
leonardz35 3 years ago
123 wheel HP? Seriously? He must be pushing a simple 160 from a JDM B16 but come on it's Spoon! Seems like it should be doing better than that... Very clean hatch though, well done.
RaceVideoKid 3 years ago
hey i was there watching that, in fact i have in on my phone. i was the annoying teenager asking all the questions :P. btw do you know the guy (Bede) that owns it? i cant get on to vtechnique anymore...
knobcheese69 3 years ago
it makes 90.2kw and 120hp
camx660 3 years ago
Nice EG indeed.. Nice and clean..
byron1789 3 years ago
Nice eg! JDM ;)
Is that a b16? how much hp?
eg9CT 3 years ago