Hydrogen HHO Nickel Vs Stainless cell Who will be the victor!

[amos033]

I think the Stainless Steel will beat the Nichol Plates hands down...but we'll see...

[simnimbus]

NASA did all kind of testing on this in the 1970's

You only need 4% hydrogen in your Air fuel mix to get the effect of burning 99% of your gasoline fuel instead of the 50% cars currently burn.

[guilermo369]

this is no serious thing ,nobody knos how much hho gas is needed per cylinder to burn all the gas in the combustion chamber, un less u use it with in a different way like a stove.

[JuanMiguelArroyo]

Just a suggestion other than stainless steel when electrolysis when the water oxidizes you will get rust and all sort of materials coming from your anodes and cathodes

[delvis11]

@JuanMiguelArroyo That is an uncontrolled consequence of using stainless steel. Nickel is a superior metal for this reason.

[amos033]

@delvis11 Can you measure the temperature of both during the tests? Electrolyte temperature is good enough. Thanks.

[fred30680]

I am new to this so this may sound silly. But

You mentioned the nickel costing more. But will it last longer than the Stainless ?

[delvis11]

@fred30680 I dont think it will last longer. They both will last a long time. The difference is nickel is less resistant to electrical flow. also It has no chromium in it or iron. So the water will stay clean.

[zerectors]

Great work delvis11 cant wait till the titanium cell I dont think it will be any better but glad to see it experimented with, the crack sounds I experienced have been more a temperature problem the lower the temp the better the crack, get it up to near boil and its a fraction of the bang, so doing your test make sure the temps are right on. Thanks and keep posting the great work

[mikepowers420]

You will love the nickel in the car. The quality of the gas is much much better. I doubt you will need to fool the computer at all.

Peace.

[delvis11]

what would make you think hho from nickel would do much better in a car?

[mikepowers420]

SS electrolyzers leach chrome into the electrolyte. The chrome knocks ortho-hydrogen down to para-hydrogen. Para- is a lot ess energetic, and wont bond with the pump gas in a car near as quickly, if at all. The nickel produces no chrome, there by, a lot higher quality of gas. Same holds true with the MMO coated Ti plates, unless the MMO has chrome in it's make up.

Peace.

Mike.

[delvis11]

You sound exactly like smack. I see no proof of that just a mouth flapping in the breeze.

[mikepowers420]

you should read up on how N.A.S.A. converts orhto into para so they can store it. Guess what, they use chrome in catalytic converters. Please don't take my word for it, do your own research. All the info you need to understand this is right here on the net.

Once you understand this, you will be flapping your gums, and people will doubt you and try to put you down, just like you did me.

Peace.

Mike.

[delvis11]

I was not referring to you mikepowers420. I have great respect for you my friend. It's the one and only "crack"

No one is going to put me down because I'm always truthful, have integrity and can admit when im wrong. I dont carry a huge chip on my shoulder and im not stuck on myself. Im sick of the BULLSHIT!

[mikepowers420]

Smack it boisterous, but I tell you, he is doing what he thinks is best, not just for himself, but for all of mankind.

He is right about the hex-chrome, and the quality of gas produced by non-SS cells. But he is wrong in thinking that Ti-MMO is the only way to go. You and I both know than nickle is cheaper and produces Great HHO. Your numbers prove it.

Would you do yourself a favor ?

Do a bubble pop sound test for yourself after the cells have been running for days in separate bubblers.

Mike

[delvis11]

will do mikepowers

[ssfuturescott]

Good test men

[d3adp001]

ok so I commented before i finished watching the video :)

[d3adp001]

I like the data gathering, but one thing to note, your mmw on the ss cell is going up even at 2.33 v per cell and the mmw was lower at 2.18 vpc. I am not saying you recorded it wrong, or that you did not in fact get this data, but i have never seen a cell have a peak mmw in the 2.3 range, something is different, more than just the metal. This data doesnt align with most other reports of ss cells. maybe seal its internal edges?

just a thought.

[delvis11]

being off by a fraction of a second in the gas measurement can through off a test a little. The data does however show a trend. I couldn't go any higher than 2.33v because the cell gets real unstable where the amps jump around. I'm sure you have been there and know what im talking about.

[Hollywoods7]

Hey ,nice. What do I do with my 500.00 worth of laser cut plates.Nickel should last longer, hence the savings..........

[delvis11]

keep your plates. i have something to show you in a video tomorrow.

[HHOPWR]

Nice data Steve. 5 stars. More of these type video's need to be done. Everyone is way too concerned with the cost of the cell. I am telling everyone reading this comment. The cost of the electricity to run the cell over its lifetime will far and away outweigh the cost of the device. If cheap cells were the way to go we all would just make glass grenades for about $10.00 each. Great work STEVE.

Larry

[delvis11]

I did three tests today. made three videos also. I posted two of them and the 3rd. has me concerned about nickel cells. This video hands down shows nickel as the superior metal. The last one has me scratching my head. Im posting tomorrow.

[gemrough]

which tomorrow. :)

[delvis11]

sorry i had to redo the tests to make sure. tomorrow is right now. the video was just now loaded.